linux.git/net/ethtool, branch v5.6-rc4

ethtool: limit bitset size

2020-02-26T19:27:31+00:00

Syzbot reported that ethnl_compact_sanity_checks() can be tricked into
reading past the end of ETHTOOL_A_BITSET_VALUE and ETHTOOL_A_BITSET_MASK
attributes and even the message by passing a value between (u32)(-31)
and (u32)(-1) as ETHTOOL_A_BITSET_SIZE.

The problem is that DIV_ROUND_UP(attr_nbits, 32) is 0 for such values so
that zero length ETHTOOL_A_BITSET_VALUE will pass the length check but
ethnl_bitmap32_not_zero() check would try to access up to 512 MB of
attribute "payload".

Prevent this overflow byt limiting the bitset size. Technically, compact
bitset format would allow bitset sizes up to almost 2^18 (so that the
nest size does not exceed U16_MAX) but bitsets used by ethtool are much
shorter. S16_MAX, the largest value which can be directly used as an
upper limit in policy, should be a reasonable compromise.

Fixes: 10b518d4e6dd ("ethtool: netlink bitset handling")
Reported-by: syzbot+7fd4ed5b4234ab1fdccd@syzkaller.appspotmail.com
Reported-by: syzbot+709b7a64d57978247e44@syzkaller.appspotmail.com
Reported-by: syzbot+983cb8fb2d17a7af549d@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek 
Signed-off-by: David S. Miller

ethtool: fix application of verbose no_mask bitset

2020-02-17T03:28:51+00:00

A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. This can
cause incorrect results like

  lion:~ # ethtool eth0 | grep Wake
          Supports Wake-on: pumbg
          Wake-on: g
  lion:~ # ethtool -s eth0 wol u
  lion:~ # ethtool eth0 | grep Wake
          Supports Wake-on: pumbg
          Wake-on: ug

when the second ethtool command issues request

ETHTOOL_MSG_WOL_SET
    ETHTOOL_A_WOL_HEADER
        ETHTOOL_A_HEADER_DEV_NAME = "eth0"
    ETHTOOL_A_WOL_MODES
        ETHTOOL_A_BITSET_NOMASK
        ETHTOOL_A_BITSET_BITS
            ETHTOOL_A_BITSET_BITS_BIT
                ETHTOOL_BITSET_BIT_INDEX = 1

Fix the logic by clearing the whole target bitmap before we start iterating
through the request bits.

Fixes: 10b518d4e6dd ("ethtool: netlink bitset handling")
Signed-off-by: Michal Kubecek 
Signed-off-by: David S. Miller

net/core: Replace driver version to be kernel version

2020-01-27T12:47:22+00:00

In order to stop useless driver version bumps and unify output
presented by ethtool -i, let's set default version string.

As Linus said in [1]: "Things are supposed to be backwards and
forwards compatible, because we don't accept breakage in user
space anyway. So versioning is pointless, and only causes
problems."

They cause problems when users start to see version changes
and expect specific set of features which will be different
for stable@, vanilla and distribution kernels.

Distribution kernels are based on some kernel version with extra
patches on top, for example, in RedHat world this "extra" is a lot
and for them your driver version say nothing. Users who run vanilla
kernels won't use driver version information too, because running
such kernels requires knowledge and understanding.

Another set of problems are related to difference in versioning scheme
and such doesn't allow to write meaningful automation which will work
sanely on all ethtool capable devices.

Before this change:
[leonro@erver ~]$ ethtool -i eth0
driver: virtio_net
version: 1.0.0
After this change and once ->version assignment will be deleted
from virtio_net:
[leonro@server ~]$ ethtool -i eth0
driver: virtio_net
version: 5.5.0-rc6+

Link: https://lore.kernel.org/ksummit-discuss/CA+55aFx9A=5cc0QZ7CySC4F2K7eYaEfzkdYEc9JaNgCcV25=rg@mail.gmail.com/
Link: https://lore.kernel.org/linux-rdma/20200122152627.14903-1-michal.kalderon@marvell.com/T/#md460ff8f976c532a89d6860411c3c50bb811038b
Link: https://lore.kernel.org/linux-rdma/20200127060835.GA570@unicorn.suse.cz
Signed-off-by: Leon Romanovsky 
Acked-by: Shannon Nelson 
Signed-off-by: David S. Miller

ethtool: add WOL_NTF notification

2020-01-27T10:31:36+00:00

Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of
a device are modified using ETHTOOL_MSG_WOL_SET netlink message or
ETHTOOL_SWOL ioctl request.

As notifications can be received by anyone, do not include SecureOn(tm)
password in notification messages.

Signed-off-by: Michal Kubecek 
Signed-off-by: David S. Miller

ethtool: set wake-on-lan settings with WOL_SET request

2020-01-27T10:31:36+00:00

Implement WOL_SET netlink request to set wake-on-lan settings. This is
equivalent to ETHTOOL_SWOL ioctl request.

Signed-off-by: Michal Kubecek 
Signed-off-by: David S. Miller

ethtool: provide WoL settings with WOL_GET request

2020-01-27T10:31:36+00:00

Implement WOL_GET request to get wake-on-lan settings for a device,
traditionally available via ETHTOOL_GWOL ioctl request.

As part of the implementation, provide symbolic names for wake-on-line
modes as ETH_SS_WOL_MODES string set.

Signed-off-by: Michal Kubecek 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

ethtool: add DEBUG_NTF notification

2020-01-27T10:31:36+00:00

Send ETHTOOL_MSG_DEBUG_NTF notification message whenever debugging message
mask for a device are modified using ETHTOOL_MSG_DEBUG_SET netlink message
or ETHTOOL_SMSGLVL ioctl request.

The notification message has the same format as reply to DEBUG_GET request.
As with other ethtool notifications, netlink requests only trigger the
notification if the mask is actually changed while ioctl request trigger it
whenever the request results in calling the ethtool_ops handler.

Signed-off-by: Michal Kubecek 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

ethtool: set message mask with DEBUG_SET request

2020-01-27T10:31:35+00:00

Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by
ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)

Signed-off-by: Michal Kubecek 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

ethtool: provide message mask with DEBUG_GET request

2020-01-27T10:31:35+00:00

Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported by
ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)

As part of the implementation, provide symbolic names for message mask bits
as ETH_SS_MSG_CLASSES string set.

Signed-off-by: Michal Kubecek 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

ethtool: fix kernel-doc descriptions

2020-01-27T10:31:35+00:00

Fix missing or incorrect function argument and struct member descriptions.

Signed-off-by: Michal Kubecek 
Signed-off-by: David S. Miller