linux.git/net/ethtool/ioctl.c, branch v5.12

ethtool: Remove link_mode param and derive link params from driver

2021-04-07T21:53:04+00:00

Some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback, before populating it with actual values.
Such drivers will set the new 'link_mode' field to zero, resulting in
user space receiving wrong link mode information given that zero is a
valid value for the field.

Another problem is that some drivers (notably tun) can report random
values in the 'link_mode' field. This can result in a general protection
fault when the field is used as an index to the 'link_mode_params' array
[1].

This happens because such drivers implement their set_link_ksettings()
callback by simply overwriting their private copy of
'ethtool_link_ksettings' struct with the one they get from the stack,
which is not always properly initialized.

Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings'
and instead have drivers call ethtool_params_from_link_mode() with the
current link mode. The function will derive the link parameters (e.g.,
speed) from the link mode and fill them in the 'ethtool_link_ksettings'
struct.

v3:
	* Remove link_mode parameter and derive the link parameters in
	  the driver instead of passing link_mode parameter to ethtool
	  and derive it there.

v2:
	* Introduce 'cap_link_mode_supported' instead of adding a
	  validity field to 'ethtool_link_ksettings' struct.

[1]
general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967]
CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446
Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03
+38 d0 7c 08 84 d2 0f 85 b9
RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000
RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960
RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f
R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000
R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210
FS:  0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37
 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586
 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656
 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620
 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842
 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson 
Reported-by: Eric Dumazet 
Reviewed-by: Ido Schimmel 
Signed-off-by: David S. Miller

ethtool: Get link mode in use instead of speed and duplex parameters

2021-02-04T02:37:29+00:00

Currently, when user space queries the link's parameters, as speed and
duplex, each parameter is passed from the driver to ethtool.

Instead, get the link mode bit in use, and derive each of the parameters
from it in ethtool.

Signed-off-by: Danielle Ratson 
Signed-off-by: Jakub Kicinski

ethtool: remove unneeded semicolon

2020-11-03T01:50:53+00:00

A semicolon is not needed after a switch statement.

Signed-off-by: Tom Rix 
Link: https://lore.kernel.org/r/20201101155601.2294374-1-trix@redhat.com
Signed-off-by: Jakub Kicinski

ethtool: allow netdev driver to define phy tunables

2020-10-06T13:16:01+00:00

Define get/set phy tunable callbacks in ethtool ops.
This will allow MAC drivers with integrated PHY still to implement
these tunables.

Reviewed-by: Andrew Lunn 
Signed-off-by: Igor Russkikh 
Signed-off-by: David S. Miller

ethtool: fix error handling in ethtool_phys_id

2020-09-03T21:59:51+00:00

If ops->set_phys_id() returned an error, previously we would only break
 out of the inner loop, which neither stopped the outer loop nor returned
 the error to the user (since 'rc' would be overwritten on the next pass
 through the loop).
Thus, rewrite it to use a single loop, so that the break does the right
 thing.  Use u64 for 'count' and 'i' to prevent overflow in case of
 (unreasonably) large values of id.data and n.

Signed-off-by: Edward Cree 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2020-09-01T20:22:59+00:00

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-09-01

The following pull-request contains BPF updates for your *net-next* tree.

There are two small conflicts when pulling, resolve as follows:

1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120282b ("libbpf: Factor
   out common ELF operations and improve logging") in bpf-next and 1e891e513e16
   ("libbpf: Fix map index used in error message") in net-next. Resolve by taking
   the hunk in bpf-next:

        [...]
        scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
        data = elf_sec_data(obj, scn);
        if (!scn || !data) {
                pr_warn("elf: failed to get %s map definitions for %s\n",
                        MAPS_ELF_SEC, obj->path);
                return -EINVAL;
        }
        [...]

2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
   9647c57b11e5 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
   better performance") in bpf-next and e20f0dbf204f ("net/mlx5e: RX, Add a prefetch
   command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
   net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:

        [...]
        xdp_set_data_meta_invalid(xdp);
        xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
        net_prefetch(xdp->data);
        [...]

We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).

The main changes are:

1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
   for tracing to reliably access user memory, from Alexei Starovoitov.

2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.

3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.

4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.

5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.

6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.

7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.

8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.

9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.

10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.

11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.

12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.

13) Various smaller cleanups and improvements all over the place.
====================

Signed-off-by: David S. Miller

xsk: i40e: ice: ixgbe: mlx5: Rename xsk zero-copy driver interfaces

2020-08-31T19:15:04+00:00

Rename the AF_XDP zero-copy driver interface functions to better
reflect what they do after the replacement of umems with buffer
pools in the previous commit. Mostly it is about replacing the
umem name from the function names with xsk_buff and also have
them take the a buffer pool pointer instead of a umem. The
various ring functions have also been renamed in the process so
that they have the same naming convention as the internal
functions in xsk_queue.h. This so that it will be clearer what
they do and also for consistency.

Signed-off-by: Magnus Karlsson 
Signed-off-by: Daniel Borkmann 
Acked-by: Björn Töpel 
Link: https://lore.kernel.org/bpf/1598603189-32145-3-git-send-email-magnus.karlsson@intel.com

xsk: i40e: ice: ixgbe: mlx5: Pass buffer pool to driver instead of umem

2020-08-31T19:15:03+00:00

Replace the explicit umem reference passed to the driver in AF_XDP
zero-copy mode with the buffer pool instead. This in preparation for
extending the functionality of the zero-copy mode so that umems can be
shared between queues on the same netdev and also between netdevs. In
this commit, only an umem reference has been added to the buffer pool
struct. But later commits will add other entities to it. These are
going to be entities that are different between different queue ids
and netdevs even though the umem is shared between them.

Signed-off-by: Magnus Karlsson 
Signed-off-by: Daniel Borkmann 
Acked-by: Björn Töpel 
Link: https://lore.kernel.org/bpf/1598603189-32145-2-git-send-email-magnus.karlsson@intel.com

ethtool: allow flow-type ether without IP protocol field

2020-08-20T23:26:03+00:00

Set IP protocol mask only when IP protocol field is set.
This will allow flow-type ether with vlan rule which don't have
protocol field to apply.

ethtool -N ens5f4 flow-type ether proto 0x8100 vlan 0x600\
m 0x1FFF action 3 loc 16

Signed-off-by: Vishal Kulkarni 
Reviewed-by: Michal Kubecek 
Signed-off-by: David S. Miller

net: phy: Uninline PHY ethtool statistics operations

2020-07-08T19:39:05+00:00

Now that we have moved the PHY ethtool statistics to be dynamically
registered, we no longer need to inline those for ethtool. This used to
be done to avoid cross symbol referencing and allow ethtool to be
decoupled from PHYLIB entirely.

Signed-off-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller