linux.git/net/dsa/slave.c, branch v5.4

net: core: add generic lockdep keys

2019-10-24T21:53:48+00:00

Some interface types could be nested.
(VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..)
These interface types should set lockdep class because, without lockdep
class key, lockdep always warn about unexisting circular locking.

In the current code, these interfaces have their own lockdep class keys and
these manage itself. So that there are so many duplicate code around the
/driver/net and /net/.
This patch adds new generic lockdep keys and some helper functions for it.

This patch does below changes.
a) Add lockdep class keys in struct net_device
   - qdisc_running, xmit, addr_list, qdisc_busylock
   - these keys are used as dynamic lockdep key.
b) When net_device is being allocated, lockdep keys are registered.
   - alloc_netdev_mqs()
c) When net_device is being free'd llockdep keys are unregistered.
   - free_netdev()
d) Add generic lockdep key helper function
   - netdev_register_lockdep_key()
   - netdev_unregister_lockdep_key()
   - netdev_update_lockdep_key()
e) Remove unnecessary generic lockdep macro and functions
f) Remove unnecessary lockdep code of each interfaces.

After this patch, each interface modules don't need to maintain
their lockdep keys.

Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller

net: dsa: Pass ndo_setup_tc slave callback to drivers

2019-09-16T19:32:57+00:00

DSA currently handles shared block filters (for the classifier-action
qdisc) in the core due to what I believe are simply pragmatic reasons -
hiding the complexity from drivers and offerring a simple API for port
mirroring.

Extend the dsa_slave_setup_tc function by passing all other qdisc
offloads to the driver layer, where the driver may choose what it
implements and how. DSA is simply a pass-through in this case.

Signed-off-by: Vladimir Oltean 
Acked-by: Kurt Kanzenbach 
Reviewed-by: Florian Fainelli 
Acked-by: Ilias Apalodimas 
Signed-off-by: David S. Miller

net: dsa: Advertise the VLAN offload netdev ability only if switch supports it

2019-08-28T03:46:26+00:00

When adding a VLAN sub-interface on a DSA slave port, the 8021q core
checks NETIF_F_HW_VLAN_CTAG_FILTER and, if the netdev is capable of
filtering, calls .ndo_vlan_rx_add_vid or .ndo_vlan_rx_kill_vid to
configure the VLAN offloading.

DSA sets this up counter-intuitively: it always advertises this netdev
feature, but the underlying driver may not actually support VLAN table
manipulation. In that case, the DSA core is forced to ignore the error,
because not being able to offload the VLAN is still fine - and should
result in the creation of a non-accelerated VLAN sub-interface.

Change this so that the netdev feature is only advertised for switch
drivers that support VLAN manipulation, instead of checking for
-EOPNOTSUPP at runtime.

Suggested-by: Florian Fainelli 
Signed-off-by: Vladimir Oltean 
Signed-off-by: David S. Miller

net: dsa: clear VLAN PVID flag for CPU port

2019-08-28T03:17:28+00:00

When the bridge offloads a VLAN on a slave port, we also need to
program its dedicated CPU port as a member of the VLAN.

Drivers may handle the CPU port's membership as they want. For example,
Marvell as a special "Unmodified" mode to pass frames as is through
such ports.

Even though DSA expects the drivers to handle the CPU port membership,
it does not make sense to program user VLANs as PVID on the CPU port.
This patch clears this flag before programming the CPU port.

Signed-off-by: Vivien Didelot 
Suggested-by: Vladimir Oltean 
Signed-off-by: David S. Miller

net: dsa: program VLAN on CPU port from slave

2019-08-28T03:17:28+00:00

DSA currently programs a VLAN on the CPU port implicitly after the
related notifier is received by a switch.

While we still need to do this transparent programmation of the DSA
links in the fabric, programming the CPU port this way may cause
problems in some corners such as the tag_8021q driver.

Because the dedicated CPU port is specific to a slave, make their
programmation explicit a few layers up, in the slave code.

Note that technically, DSA links have a dedicated CPU port as well,
but since they are only used as conduit between interconnected switches
of a fabric, programming them transparently this way is what we want.

Signed-off-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: check bridge VLAN in slave operations

2019-08-28T03:17:27+00:00

The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is
not bridged or if its bridge is not VLAN aware.

This is a good thing but other corners of DSA, such as the tag_8021q
driver, may need to program VLANs regardless the bridge state.

And also because bridge_dev is specific to user ports anyway, move
these checks were it belongs, one layer up in the slave code.

Signed-off-by: Vivien Didelot 
Suggested-by: Vladimir Oltean 
Signed-off-by: David S. Miller

net: dsa: add slave VLAN helpers

2019-08-28T03:17:27+00:00

Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle
SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the
switchdev_obj_port_vlan structure on add since we will modify it in
future patches.

Signed-off-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: do not skip -EOPNOTSUPP in dsa_port_vid_add

2019-08-28T03:17:27+00:00

Currently dsa_port_vid_add returns 0 if the switch returns -EOPNOTSUPP.

This function is used in the tag_8021q.c code to offload the PVID of
ports, which would simply not work if .port_vlan_add is not supported
by the underlying switch.

Do not skip -EOPNOTSUPP in dsa_port_vid_add but only when necessary,
that is to say in dsa_slave_vlan_rx_add_vid.

Signed-off-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: flow_offload: add flow_block structure and use it

2019-07-20T04:27:45+00:00

This object stores the flow block callbacks that are attached to this
block. Update flow_block_cb_lookup() to take this new object.

This patch restores the block sharing feature.

Fixes: da3eeb904ff4 ("net: flow_offload: add list handling functions")
Signed-off-by: Pablo Neira Ayuso 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller

net: flow_offload: rename tc_setup_cb_t to flow_setup_cb_t

2019-07-20T04:27:45+00:00

Rename this type definition and adapt users.

Signed-off-by: Pablo Neira Ayuso 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller