<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/net/dccp, branch v3.13-rc2</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>ipv4: introduce new IP_MTU_DISCOVER mode IP_PMTUDISC_INTERFACE</title>
<updated>2013-11-06T02:52:27+00:00</updated>
<author>
<name>Hannes Frederic Sowa</name>
<email>hannes@stressinduktion.org</email>
</author>
<published>2013-11-05T01:24:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=482fc6094afad572a4ea1fd722e7b11ca72022a0'/>
<id>482fc6094afad572a4ea1fd722e7b11ca72022a0</id>
<content type='text'>
Sockets marked with IP_PMTUDISC_INTERFACE won't do path mtu discovery,
their sockets won't accept and install new path mtu information and they
will always use the interface mtu for outgoing packets. It is guaranteed
that the packet is not fragmented locally. But we won't set the DF-Flag
on the outgoing frames.

Florian Weimer had the idea to use this flag to ensure DNS servers are
never generating outgoing fragments. They may well be fragmented on the
path, but the server never stores or usees path mtu values, which could
well be forged in an attack.

(The root of the problem with path MTU discovery is that there is
no reliable way to authenticate ICMP Fragmentation Needed But DF Set
messages because they are sent from intermediate routers with their
source addresses, and the IMCP payload will not always contain sufficient
information to identify a flow.)

Recent research in the DNS community showed that it is possible to
implement an attack where DNS cache poisoning is feasible by spoofing
fragments. This work was done by Amir Herzberg and Haya Shulman:
&lt;https://sites.google.com/site/hayashulman/files/fragmentation-poisoning.pdf&gt;

This issue was previously discussed among the DNS community, e.g.
&lt;http://www.ietf.org/mail-archive/web/dnsext/current/msg01204.html&gt;,
without leading to fixes.

This patch depends on the patch "ipv4: fix DO and PROBE pmtu mode
regarding local fragmentation with UFO/CORK" for the enforcement of the
non-fragmentable checks. If other users than ip_append_page/data should
use this semantic too, we have to add a new flag to IPCB(skb)-&gt;flags to
suppress local fragmentation and check for this in ip_finish_output.

Many thanks to Florian Weimer for the idea and feedback while implementing
this patch.

Cc: David S. Miller &lt;davem@davemloft.net&gt;
Suggested-by: Florian Weimer &lt;fweimer@redhat.com&gt;
Signed-off-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Sockets marked with IP_PMTUDISC_INTERFACE won't do path mtu discovery,
their sockets won't accept and install new path mtu information and they
will always use the interface mtu for outgoing packets. It is guaranteed
that the packet is not fragmented locally. But we won't set the DF-Flag
on the outgoing frames.

Florian Weimer had the idea to use this flag to ensure DNS servers are
never generating outgoing fragments. They may well be fragmented on the
path, but the server never stores or usees path mtu values, which could
well be forged in an attack.

(The root of the problem with path MTU discovery is that there is
no reliable way to authenticate ICMP Fragmentation Needed But DF Set
messages because they are sent from intermediate routers with their
source addresses, and the IMCP payload will not always contain sufficient
information to identify a flow.)

Recent research in the DNS community showed that it is possible to
implement an attack where DNS cache poisoning is feasible by spoofing
fragments. This work was done by Amir Herzberg and Haya Shulman:
&lt;https://sites.google.com/site/hayashulman/files/fragmentation-poisoning.pdf&gt;

This issue was previously discussed among the DNS community, e.g.
&lt;http://www.ietf.org/mail-archive/web/dnsext/current/msg01204.html&gt;,
without leading to fixes.

This patch depends on the patch "ipv4: fix DO and PROBE pmtu mode
regarding local fragmentation with UFO/CORK" for the enforcement of the
non-fragmentable checks. If other users than ip_append_page/data should
use this semantic too, we have to add a new flag to IPCB(skb)-&gt;flags to
suppress local fragmentation and check for this in ip_finish_output.

Many thanks to Florian Weimer for the idea and feedback while implementing
this patch.

Cc: David S. Miller &lt;davem@davemloft.net&gt;
Suggested-by: Florian Weimer &lt;fweimer@redhat.com&gt;
Signed-off-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: dccp: Remove extern from function prototypes</title>
<updated>2013-10-19T23:12:11+00:00</updated>
<author>
<name>Joe Perches</name>
<email>joe@perches.com</email>
</author>
<published>2013-10-18T20:48:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a402a5aa9b4cbb42cc41bf573d2e5c4713541af0'/>
<id>a402a5aa9b4cbb42cc41bf573d2e5c4713541af0</id>
<content type='text'>
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches &lt;joe@perches.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches &lt;joe@perches.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>inet: rename ir_loc_port to ir_num</title>
<updated>2013-10-10T18:37:35+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2013-10-10T07:04:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b44084c2c822f99dd3f2334b288b7e463d222662'/>
<id>b44084c2c822f99dd3f2334b288b7e463d222662</id>
<content type='text'>
In commit 634fb979e8f ("inet: includes a sock_common in request_sock")
I forgot that the two ports in sock_common do not have same byte order :

skc_dport is __be16 (network order), but skc_num is __u16 (host order)

So sparse complains because ir_loc_port (mapped into skc_num) is
considered as __u16 while it should be __be16

Let rename ir_loc_port to ireq-&gt;ir_num (analogy with inet-&gt;inet_num),
and perform appropriate htons/ntohs conversions.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: Wu Fengguang &lt;fengguang.wu@intel.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In commit 634fb979e8f ("inet: includes a sock_common in request_sock")
I forgot that the two ports in sock_common do not have same byte order :

skc_dport is __be16 (network order), but skc_num is __u16 (host order)

So sparse complains because ir_loc_port (mapped into skc_num) is
considered as __u16 while it should be __be16

Let rename ir_loc_port to ireq-&gt;ir_num (analogy with inet-&gt;inet_num),
and perform appropriate htons/ntohs conversions.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: Wu Fengguang &lt;fengguang.wu@intel.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>inet: includes a sock_common in request_sock</title>
<updated>2013-10-10T04:08:07+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2013-10-09T22:21:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=634fb979e8f3a70f04c1f2f519d0cd1142eb5c1a'/>
<id>634fb979e8f3a70f04c1f2f519d0cd1142eb5c1a</id>
<content type='text'>
TCP listener refactoring, part 5 :

We want to be able to insert request sockets (SYN_RECV) into main
ehash table instead of the per listener hash table to allow RCU
lookups and remove listener lock contention.

This patch includes the needed struct sock_common in front
of struct request_sock

This means there is no more inet6_request_sock IPv6 specific
structure.

Following inet_request_sock fields were renamed as they became
macros to reference fields from struct sock_common.
Prefix ir_ was chosen to avoid name collisions.

loc_port   -&gt; ir_loc_port
loc_addr   -&gt; ir_loc_addr
rmt_addr   -&gt; ir_rmt_addr
rmt_port   -&gt; ir_rmt_port
iif        -&gt; ir_iif

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
TCP listener refactoring, part 5 :

We want to be able to insert request sockets (SYN_RECV) into main
ehash table instead of the per listener hash table to allow RCU
lookups and remove listener lock contention.

This patch includes the needed struct sock_common in front
of struct request_sock

This means there is no more inet6_request_sock IPv6 specific
structure.

Following inet_request_sock fields were renamed as they became
macros to reference fields from struct sock_common.
Prefix ir_ was chosen to avoid name collisions.

loc_port   -&gt; ir_loc_port
loc_addr   -&gt; ir_loc_addr
rmt_addr   -&gt; ir_rmt_addr
rmt_port   -&gt; ir_rmt_port
iif        -&gt; ir_iif

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: make lookups simpler and faster</title>
<updated>2013-10-09T04:01:25+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2013-10-03T22:42:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=efe4208f47f907b86f528788da711e8ab9dea44d'/>
<id>efe4208f47f907b86f528788da711e8ab9dea44d</id>
<content type='text'>
TCP listener refactoring, part 4 :

To speed up inet lookups, we moved IPv4 addresses from inet to struct
sock_common

Now is time to do the same for IPv6, because it permits us to have fast
lookups for all kind of sockets, including upcoming SYN_RECV.

Getting IPv6 addresses in TCP lookups currently requires two extra cache
lines, plus a dereference (and memory stall).

inet6_sk(sk) does the dereference of inet_sk(__sk)-&gt;pinet6

This patch is way bigger than its IPv4 counter part, because for IPv4,
we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6,
it's not doable easily.

inet6_sk(sk)-&gt;daddr becomes sk-&gt;sk_v6_daddr
inet6_sk(sk)-&gt;rcv_saddr becomes sk-&gt;sk_v6_rcv_saddr

And timewait socket also have tw-&gt;tw_v6_daddr &amp; tw-&gt;tw_v6_rcv_saddr
at the same offset.

We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic
macro.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
TCP listener refactoring, part 4 :

To speed up inet lookups, we moved IPv4 addresses from inet to struct
sock_common

Now is time to do the same for IPv6, because it permits us to have fast
lookups for all kind of sockets, including upcoming SYN_RECV.

Getting IPv6 addresses in TCP lookups currently requires two extra cache
lines, plus a dereference (and memory stall).

inet6_sk(sk) does the dereference of inet_sk(__sk)-&gt;pinet6

This patch is way bigger than its IPv4 counter part, because for IPv4,
we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6,
it's not doable easily.

inet6_sk(sk)-&gt;daddr becomes sk-&gt;sk_v6_daddr
inet6_sk(sk)-&gt;rcv_saddr becomes sk-&gt;sk_v6_rcv_saddr

And timewait socket also have tw-&gt;tw_v6_daddr &amp; tw-&gt;tw_v6_rcv_saddr
at the same offset.

We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic
macro.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp/dccp: remove twchain</title>
<updated>2013-10-09T03:19:24+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2013-10-03T07:22:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=05dbc7b59481ca891bbcfe6799a562d48159fbf7'/>
<id>05dbc7b59481ca891bbcfe6799a562d48159fbf7</id>
<content type='text'>
TCP listener refactoring, part 3 :

Our goal is to hash SYN_RECV sockets into main ehash for fast lookup,
and parallel SYN processing.

Current inet_ehash_bucket contains two chains, one for ESTABLISH (and
friend states) sockets, another for TIME_WAIT sockets only.

As the hash table is sized to get at most one socket per bucket, it
makes little sense to have separate twchain, as it makes the lookup
slightly more complicated, and doubles hash table memory usage.

If we make sure all socket types have the lookup keys at the same
offsets, we can use a generic and faster lookup. It turns out TIME_WAIT
and ESTABLISHED sockets already have common lookup fields for IPv4.

[ INET_TW_MATCH() is no longer needed ]

I'll provide a follow-up to factorize IPv6 lookup as well, to remove
INET6_TW_MATCH()

This way, SYN_RECV pseudo sockets will be supported the same.

A new sock_gen_put() helper is added, doing either a sock_put() or
inet_twsk_put() [ and will support SYN_RECV later ].

Note this helper should only be called in real slow path, when rcu
lookup found a socket that was moved to another identity (freed/reused
immediately), but could eventually be used in other contexts, like
sock_edemux()

Before patch :

dmesg | grep "TCP established"

TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

After patch :

TCP established hash table entries: 524288 (order: 10, 4194304 bytes)

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
TCP listener refactoring, part 3 :

Our goal is to hash SYN_RECV sockets into main ehash for fast lookup,
and parallel SYN processing.

Current inet_ehash_bucket contains two chains, one for ESTABLISH (and
friend states) sockets, another for TIME_WAIT sockets only.

As the hash table is sized to get at most one socket per bucket, it
makes little sense to have separate twchain, as it makes the lookup
slightly more complicated, and doubles hash table memory usage.

If we make sure all socket types have the lookup keys at the same
offsets, we can use a generic and faster lookup. It turns out TIME_WAIT
and ESTABLISHED sockets already have common lookup fields for IPv4.

[ INET_TW_MATCH() is no longer needed ]

I'll provide a follow-up to factorize IPv6 lookup as well, to remove
INET6_TW_MATCH()

This way, SYN_RECV pseudo sockets will be supported the same.

A new sock_gen_put() helper is added, doing either a sock_put() or
inet_twsk_put() [ and will support SYN_RECV later ].

Note this helper should only be called in real slow path, when rcu
lookup found a socket that was moved to another identity (freed/reused
immediately), but could eventually be used in other contexts, like
sock_edemux()

Before patch :

dmesg | grep "TCP established"

TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

After patch :

TCP established hash table entries: 524288 (order: 10, 4194304 bytes)

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net:dccp: do not report ICMP redirects to user space</title>
<updated>2013-09-18T16:33:44+00:00</updated>
<author>
<name>Duan Jiong</name>
<email>duanj.fnst@cn.fujitsu.com</email>
</author>
<published>2013-09-18T12:03:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=bd784a140712fd06674f2240eecfc4ccae421129'/>
<id>bd784a140712fd06674f2240eecfc4ccae421129</id>
<content type='text'>
DCCP shouldn't be setting sk_err on redirects as it
isn't an error condition. it should be doing exactly
what tcp is doing and leaving the error handler without
touching the socket.

Signed-off-by: Duan Jiong &lt;duanj.fnst@cn.fujitsu.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
DCCP shouldn't be setting sk_err on redirects as it
isn't an error condition. it should be doing exactly
what tcp is doing and leaving the error handler without
touching the socket.

Signed-off-by: Duan Jiong &lt;duanj.fnst@cn.fujitsu.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: add sk_stream_is_writeable() helper</title>
<updated>2013-07-25T00:54:48+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2013-07-23T03:26:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=64dc61306ce7da370833289739e2f52dfc6b37ba'/>
<id>64dc61306ce7da370833289739e2f52dfc6b37ba</id>
<content type='text'>
Several call sites use the hardcoded following condition :

sk_stream_wspace(sk) &gt;= sk_stream_min_wspace(sk)

Lets use a helper because TCP_NOTSENT_LOWAT support will change this
condition for TCP sockets.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Neal Cardwell &lt;ncardwell@google.com&gt;
Cc: Yuchung Cheng &lt;ycheng@google.com&gt;
Acked-by: Neal Cardwell &lt;ncardwell@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Several call sites use the hardcoded following condition :

sk_stream_wspace(sk) &gt;= sk_stream_min_wspace(sk)

Lets use a helper because TCP_NOTSENT_LOWAT support will change this
condition for TCP sockets.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Neal Cardwell &lt;ncardwell@google.com&gt;
Cc: Yuchung Cheng &lt;ycheng@google.com&gt;
Acked-by: Neal Cardwell &lt;ncardwell@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: Remove TCPCT</title>
<updated>2013-03-17T18:35:13+00:00</updated>
<author>
<name>Christoph Paasch</name>
<email>christoph.paasch@uclouvain.be</email>
</author>
<published>2013-03-17T08:23:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=1a2c6181c4a1922021b4d7df373bba612c3e5f04'/>
<id>1a2c6181c4a1922021b4d7df373bba612c3e5f04</id>
<content type='text'>
TCPCT uses option-number 253, reserved for experimental use and should
not be used in production environments.
Further, TCPCT does not fully implement RFC 6013.

As a nice side-effect, removing TCPCT increases TCP's performance for
very short flows:

Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests
for files of 1KB size.

before this patch:
	average (among 7 runs) of 20845.5 Requests/Second
after:
	average (among 7 runs) of 21403.6 Requests/Second

Signed-off-by: Christoph Paasch &lt;christoph.paasch@uclouvain.be&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
TCPCT uses option-number 253, reserved for experimental use and should
not be used in production environments.
Further, TCPCT does not fully implement RFC 6013.

As a nice side-effect, removing TCPCT increases TCP's performance for
very short flows:

Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests
for files of 1KB size.

before this patch:
	average (among 7 runs) of 20845.5 Requests/Second
after:
	average (among 7 runs) of 21403.6 Requests/Second

Signed-off-by: Christoph Paasch &lt;christoph.paasch@uclouvain.be&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core</title>
<updated>2013-02-21T20:05:51+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-02-21T20:05:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=06991c28f37ad68e5c03777f5c3b679b56e3dac1'/>
<id>06991c28f37ad68e5c03777f5c3b679b56e3dac1</id>
<content type='text'>
Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
</pre>
</div>
</content>
</entry>
</feed>
