linux.git/net/core, branch v6.6

neighbour: fix various data-races

2023-10-21T00:41:29+00:00

1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
   can be written from sysfs.

2) tbl->last_flush is read locklessly from neigh_alloc()

3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()

4) neightbl_fill_info() reads cpu stats that can be changed concurrently.

Fixes: c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com
Signed-off-by: Jakub Kicinski

net: move altnames together with the netdevice

2023-10-19T13:51:16+00:00

The altname nodes are currently not moved to the new netns
when netdevice itself moves:

  [ ~]# ip netns add test
  [ ~]# ip -netns test link add name eth0 type dummy
  [ ~]# ip -netns test link property add dev eth0 altname some-name
  [ ~]# ip -netns test link show dev some-name
  2: eth0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff
      altname some-name
  [ ~]# ip -netns test link set dev eth0 netns 1
  [ ~]# ip link
  ...
  3: eth0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
      altname some-name
  [ ~]# ip li show dev some-name
  Device "some-name" does not exist.

Remove them from the hash table when device is unlisted
and add back when listed again.

Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Paolo Abeni

net: avoid UAF on deleted altname

2023-10-19T13:51:16+00:00

Altnames are accessed under RCU (dev_get_by_name_rcu())
but freed by kfree() with no synchronization point.

Each node has one or two allocations (node and a variable-size
name, sometimes the name is netdev->name). Adding rcu_heads
here is a bit tedious. Besides most code which unlists the names
already has rcu barriers - so take the simpler approach of adding
synchronize_rcu(). Note that the one on the unregistration path
(which matters more) is removed by the next fix.

Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Paolo Abeni

net: check for altname conflicts when changing netdev's netns

2023-10-19T13:51:16+00:00

It's currently possible to create an altname conflicting
with an altname or real name of another device by creating
it in another netns and moving it over:

 [ ~]$ ip link add dev eth0 type dummy

 [ ~]$ ip netns add test
 [ ~]$ ip -netns test link add dev ethX netns test type dummy
 [ ~]$ ip -netns test link property add dev ethX altname eth0
 [ ~]$ ip -netns test link set dev ethX netns 1

 [ ~]$ ip link
 ...
 3: eth0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
 ...
 5: ethX:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 26:b7:28:78:38:0f brd ff:ff:ff:ff:ff:ff
     altname eth0

Create a macro for walking the altnames, this hopefully makes
it clearer that the list we walk contains only altnames.
Which is otherwise not entirely intuitive.

Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Paolo Abeni

net: fix ifname in netlink ntf during netns move

2023-10-19T13:51:16+00:00

dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.

Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:

 5: eth0:  mtu 1500 qdisc noop state DOWN group default
     link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
 6: eth1:  mtu 1500 qdisc noop state DOWN group default
     link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff

 [ ~]# ip link set dev eth0 netns 1 name eth1

ip monitor inside netns:
 Deleted inet eth0
 Deleted inet6 eth0
 Deleted 5: eth1:  mtu 1500 qdisc noop state DOWN group default
     link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7

Name is reported as eth1 in old netns for ifindex 5, already renamed.

Fixes: d90310243fd7 ("net: device name allocation cleanups")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Jiri Pirko 
Signed-off-by: Paolo Abeni

net: pktgen: Fix interface flags printing

2023-10-18T09:12:30+00:00

Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.

2) Similarly to the F_IPSEC flag.

3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: 99c6d3d20d62 ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia 
Signed-off-by: David S. Miller

netlink: Correct offload_xstats size

2023-10-17T00:32:59+00:00

rtnl_offload_xstats_get_size_hw_s_info_one() conditionalizes the
size-computation for IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED based on whether
or not the device has offload_xstats enabled.

However, rtnl_offload_xstats_fill_hw_s_info_one() is adding the u8 for
that field uncondtionally.

syzkaller triggered a WARNING in rtnl_stats_get due to this:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 754 at net/core/rtnetlink.c:5982 rtnl_stats_get+0x2f4/0x300
Modules linked in:
CPU: 0 PID: 754 Comm: syz-executor148 Not tainted 6.6.0-rc2-g331b78eb12af #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:rtnl_stats_get+0x2f4/0x300 net/core/rtnetlink.c:5982
Code: ff ff 89 ee e8 7d 72 50 ff 83 fd a6 74 17 e8 33 6e 50 ff 4c 89 ef be 02 00 00 00 e8 86 00 fa ff e9 7b fe ff ff e8 1c 6e 50 ff <0f> 0b eb e5 e8 73 79 7b 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc900006837c0 EFLAGS: 00010293
RAX: ffffffff81cf7f24 RBX: ffff8881015d9000 RCX: ffff888101815a00
RDX: 0000000000000000 RSI: 00000000ffffffa6 RDI: 00000000ffffffa6
RBP: 00000000ffffffa6 R08: ffffffff81cf7f03 R09: 0000000000000001
R10: ffff888101ba47b9 R11: ffff888101815a00 R12: ffff8881017dae00
R13: ffff8881017dad00 R14: ffffc90000683ab8 R15: ffffffff83c1f740
FS:  00007fbc22dbc740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000046 CR3: 000000010264e003 CR4: 0000000000170ef0
Call Trace:
 
 rtnetlink_rcv_msg+0x677/0x710 net/core/rtnetlink.c:6480
 netlink_rcv_skb+0xea/0x1c0 net/netlink/af_netlink.c:2545
 netlink_unicast+0x430/0x500 net/netlink/af_netlink.c:1342
 netlink_sendmsg+0x4fc/0x620 net/netlink/af_netlink.c:1910
 sock_sendmsg+0xa8/0xd0 net/socket.c:730
 ____sys_sendmsg+0x22a/0x320 net/socket.c:2541
 ___sys_sendmsg+0x143/0x190 net/socket.c:2595
 __x64_sys_sendmsg+0xd8/0x150 net/socket.c:2624
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7fbc22e8d6a9
Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc4320e778 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004007d0 RCX: 00007fbc22e8d6a9
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000004007d0
R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffc4320e898
R13: 00007ffc4320e8a8 R14: 00000000004004a0 R15: 00007fbc22fa5a80
 
---[ end trace 0000000000000000 ]---

Which didn't happen prior to commit bf9f1baa279f ("net: add dedicated
kmem_cache for typical/small skb->head") as the skb always was large
enough.

Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats")
Signed-off-by: Christoph Paasch 
Reviewed-by: Petr Machata 
Link: https://lore.kernel.org/r/20231013041448.8229-1-cpaasch@apple.com
Signed-off-by: Jakub Kicinski

tcp: allow again tcp_disconnect() when threads are waiting

2023-10-13T23:49:32+00:00

As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.

The blamed commit below caused a regression, as such cancellation
can now fail.

As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.

Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.

Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn 
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet 
Signed-off-by: Paolo Abeni 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski

net: refine debug info in skb_checksum_help()

2023-10-10T02:46:41+00:00

syzbot uses panic_on_warn.

This means that the skb_dump() I added in the blamed commit are
not even called.

Rewrite this so that we get the needed skb dump before syzbot crashes.

Fixes: eeee4b77dc52 ("net: add more debug info in skb_checksum_help()")
Signed-off-by: Eric Dumazet 
Reported-by: Willem de Bruijn 
Reviewed-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20231006173355.2254983-1-edumazet@google.com
Signed-off-by: Jakub Kicinski

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2023-10-04T15:28:07+00:00

Daniel Borkmann says:

====================
pull-request: bpf 2023-10-02

We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).

The main changes are:

1) Fix BPF verifier to reset backtrack_state masks on global function
   exit as otherwise subsequent precision tracking would reuse them,
   from Andrii Nakryiko.

2) Several sockmap fixes for available bytes accounting,
   from John Fastabend.

3) Reject sk_msg egress redirects to non-TCP sockets given this
   is only supported for TCP sockets today, from Jakub Sitnicki.

4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
   limits with BPF_F_BEFORE directive, from Daniel Borkmann
   and Nikolay Aleksandrov.

5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
   size_index for selecting a bpf_mem_cache, from Hou Tao.

6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
   from Song Liu.

7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
   from Leon Hwang.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Use kmalloc_size_roundup() to adjust size_index
  selftest/bpf: Add various selftests for program limits
  bpf, mprog: Fix maximum program check on mprog attachment
  bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
  bpf, sockmap: Add tests for MSG_F_PEEK
  bpf, sockmap: Do not inc copied_seq when PEEK flag set
  bpf: tcp_read_skb needs to pop skb regardless of seq
  bpf: unconditionally reset backtrack_state masks on global func exit
  bpf: Fix tr dereferencing
  selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
  s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================

Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski