linux.git/net/core/rtnetlink.c, branch v5.10 Linux kernel source tree rtnetlink: fix data overflow in rtnl_calcit() 2020-10-22T01:24:08+00:00 Di Zhu zhudi21@huawei.com 2020-10-21T02:00:53+00:00 ebfe3c5183733f784264450a41646a482f964e5e "ip addr show" command execute error when we have a physical network card with a large number of VFs The return value of if_nlmsg_size() in rtnl_calcit() will exceed range of u16 data type when any network cards has a larger number of VFs. rtnl_vfinfo_size() will significant increase needed dump size when the value of num_vfs is larger. Eventually we get a wrong value of min_ifinfo_dump_size because of overflow which decides the memory size needed by netlink dump and netlink_dump() will return -EMSGSIZE because of not enough memory was allocated. So fix it by promoting min_dump_alloc data type to u32 to avoid whole netlink message size overflow and it's also align with the data type of struct netlink_callback{}.min_dump_alloc which is assigned by return value of rtnl_calcit() Signed-off-by: Di Zhu <zhudi21@huawei.com> Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
"ip addr show" command execute error when we have a physical
network card with a large number of VFs

The return value of if_nlmsg_size() in rtnl_calcit() will exceed
range of u16 data type when any network cards has a larger number of
VFs. rtnl_vfinfo_size() will significant increase needed dump size when
the value of num_vfs is larger.

Eventually we get a wrong value of min_ifinfo_dump_size because of overflow
which decides the memory size needed by netlink dump and netlink_dump()
will return -EMSGSIZE because of not enough memory was allocated.

So fix it by promoting  min_dump_alloc data type to u32 to
avoid whole netlink message size overflow and it's also align
with the data type of struct netlink_callback{}.min_dump_alloc
which is assigned by return value of rtnl_calcit()

Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next 2020-08-04T01:27:40+00:00 David S. Miller davem@davemloft.net 2020-08-04T01:27:40+00:00 2e7199bd773bff3220184d071ed9c9cd34950e51 Daniel Borkmann says: ==================== pull-request: bpf-next 2020-08-04 The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 9 day(s) which contain a total of 135 files changed, 4603 insertions(+), 1013 deletions(-). The main changes are: 1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko. 2) Add BPF iterator for map elements and to iterate all BPF programs for efficient in-kernel inspection, from Yonghong Song and Alexei Starovoitov. 3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid unwinder errors, from Song Liu. 4) Allow cgroup local storage map to be shared between programs on the same cgroup. Also extend BPF selftests with coverage, from YiFei Zhu. 5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM load instructions, from Jean-Philippe Brucker. 6) Follow-up fixes on BPF socket lookup in combination with reuseport group handling. Also add related BPF selftests, from Jakub Sitnicki. 7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for socket create/release as well as bind functions, from Stanislav Fomichev. 8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct xdp_statistics, from Peilin Ye. 9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime. 10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6} fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin. 11) Fix a bpftool segfault due to missing program type name and make it more robust to prevent them in future gaps, from Quentin Monnet. 12) Consolidate cgroup helper functions across selftests and fix a v6 localhost resolver issue, from John Fastabend. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Daniel Borkmann says:

====================
pull-request: bpf-next 2020-08-04

The following pull-request contains BPF updates for your *net-next* tree.

We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 135 files changed, 4603 insertions(+), 1013 deletions(-).

The main changes are:

1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF
   syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko.

2) Add BPF iterator for map elements and to iterate all BPF programs for efficient
   in-kernel inspection, from Yonghong Song and Alexei Starovoitov.

3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid
   unwinder errors, from Song Liu.

4) Allow cgroup local storage map to be shared between programs on the same
   cgroup. Also extend BPF selftests with coverage, from YiFei Zhu.

5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM
   load instructions, from Jean-Philippe Brucker.

6) Follow-up fixes on BPF socket lookup in combination with reuseport group
   handling. Also add related BPF selftests, from Jakub Sitnicki.

7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for
   socket create/release as well as bind functions, from Stanislav Fomichev.

8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct
   xdp_statistics, from Peilin Ye.

9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime.

10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6}
    fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin.

11) Fix a bpftool segfault due to missing program type name and make it more robust
    to prevent them in future gaps, from Quentin Monnet.

12) Consolidate cgroup helper functions across selftests and fix a v6 localhost
    resolver issue, from John Fastabend.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
rtnetlink: add support for protodown reason 2020-08-01T01:49:16+00:00 Roopa Prabhu roopa@cumulusnetworks.com 2020-08-01T00:34:01+00:00 829eb208e80d6db95c0201cb8fa00c2f9ad87faf netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
netdev protodown is a mechanism that allows protocols to
hold an interface down. It was initially introduced in
the kernel to hold links down by a multihoming protocol.
There was also an attempt to introduce protodown
reason at the time but was rejected. protodown and protodown reason
is supported by almost every switching and routing platform.
It was ok for a while to live without a protodown reason.
But, its become more critical now given more than
one protocol may need to keep a link down on a system
at the same time. eg: vrrp peer node, port security,
multihoming protocol. Its common for Network operators and
protocol developers to look for such a reason on a networking
box (Its also known as errDisable by most networking operators)

This patch adds support for link protodown reason
attribute. There are two ways to maintain protodown
reasons.
(a) enumerate every possible reason code in kernel
    - A protocol developer has to make a request and
      have that appear in a certain kernel version
(b) provide the bits in the kernel, and allow user-space
(sysadmin or NOS distributions) to manage the bit-to-reasonname
map.
	- This makes extending reason codes easier (kind of like
      the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/)

This patch takes approach (b).

a few things about the patch:
- It treats the protodown reason bits as counter to indicate
active protodown users
- Since protodown attribute is already an exposed UAPI,
the reason is not enforced on a protodown set. Its a no-op
if not used.
the patch follows the below algorithm:
  - presence of reason bits set indicates protodown
    is in use
  - user can set protodown and protodown reason in a
    single or multiple setlink operations
  - setlink operation to clear protodown, will return -EBUSY
    if there are active protodown reason bits
  - reason is not included in link dumps if not used

example with patched iproute2:
$cat /etc/iproute2/protodown_reasons.d/r.conf
0 mlag
1 evpn
2 vrrp
3 psecurity

$ip link set dev vxlan0 protodown on protodown_reason vrrp on
$ip link set dev vxlan0 protodown_reason mlag on
$ip link show
14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
    link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp>

$ip link set dev vxlan0 protodown_reason mlag off
$ip link set dev vxlan0 protodown off protodown_reason vrrp off

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf, xdp: Maintain info on attached XDP BPF programs in net_device 2020-07-26T03:37:02+00:00 Andrii Nakryiko andriin@fb.com 2020-07-22T06:45:55+00:00 7f0a838254bdd9114b978ef2541a6ce330307e9e Instead of delegating to drivers, maintain information about which BPF programs are attached in which XDP modes (generic/skb, driver, or hardware) locally in net_device. This effectively obsoletes XDP_QUERY_PROG command. Such re-organization simplifies existing code already. But it also allows to further add bpf_link-based XDP attachments without drivers having to know about any of this at all, which seems like a good setup. XDP_SETUP_PROG/XDP_SETUP_PROG_HW are just low-level commands to driver to install/uninstall active BPF program. All the higher-level concerns about prog/link interaction will be contained within generic driver-agnostic logic. All the XDP_QUERY_PROG calls to driver in dev_xdp_uninstall() were removed. It's not clear for me why dev_xdp_uninstall() were passing previous prog_flags when resetting installed programs. That seems unnecessary, plus most drivers don't populate prog_flags anyways. Having XDP_SETUP_PROG vs XDP_SETUP_PROG_HW should be enough of an indicator of what is required of driver to correctly reset active BPF program. dev_xdp_uninstall() is also generalized as an iteration over all three supported mode. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-3-andriin@fb.com 
Instead of delegating to drivers, maintain information about which BPF
programs are attached in which XDP modes (generic/skb, driver, or hardware)
locally in net_device. This effectively obsoletes XDP_QUERY_PROG command.

Such re-organization simplifies existing code already. But it also allows to
further add bpf_link-based XDP attachments without drivers having to know
about any of this at all, which seems like a good setup.
XDP_SETUP_PROG/XDP_SETUP_PROG_HW are just low-level commands to driver to
install/uninstall active BPF program. All the higher-level concerns about
prog/link interaction will be contained within generic driver-agnostic logic.

All the XDP_QUERY_PROG calls to driver in dev_xdp_uninstall() were removed.
It's not clear for me why dev_xdp_uninstall() were passing previous prog_flags
when resetting installed programs. That seems unnecessary, plus most drivers
don't populate prog_flags anyways. Having XDP_SETUP_PROG vs XDP_SETUP_PROG_HW
should be enough of an indicator of what is required of driver to correctly
reset active BPF program. dev_xdp_uninstall() is also generalized as an
iteration over all three supported mode.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-3-andriin@fb.com
rtnetlink: Fix memory(net_device) leak when ->newlink fails 2020-07-17T19:33:18+00:00 Weilong Chen chenweilong@huawei.com 2020-07-15T12:58:10+00:00 cebb69754f37d68e1355a5e726fdac317bcda302 When vlan_newlink call register_vlan_dev fails, it might return error with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should free the memory. But currently rtnl_newlink only free the memory which state is NETREG_UNINITIALIZED. BUG: memory leak unreferenced object 0xffff8881051de000 (size 4096): comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s) hex dump (first 32 bytes): 76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2........... 00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(............. backtrace: [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline] [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574 [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline] [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline] [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929 [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067 [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329 [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397 [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460 [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469 [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329 [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918 [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline] [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672 [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352 [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406 [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439 [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When vlan_newlink call register_vlan_dev fails, it might return error
with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should
free the memory. But currently rtnl_newlink only free the memory which
state is NETREG_UNINITIALIZED.

BUG: memory leak
unreferenced object 0xffff8881051de000 (size 4096):
  comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s)
  hex dump (first 32 bytes):
    76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00  vlan2...........
    00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00  .E(.............
  backtrace:
    [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline]
    [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574
    [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline]
    [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline]
    [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929
    [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067
    [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329
    [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397
    [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460
    [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469
    [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
    [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329
    [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918
    [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline]
    [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672
    [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352
    [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406
    [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439
    [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
    [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: change addr_list_lock back to static key 2020-06-09T19:59:45+00:00 Cong Wang xiyou.wangcong@gmail.com 2020-06-08T21:53:01+00:00 845e0ebb4408d4473cf60d21224a897037e9a77a The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The dynamic key update for addr_list_lock still causes troubles,
for example the following race condition still exists:

CPU 0:				CPU 1:
(RCU read lock)			(RTNL lock)
dev_mc_seq_show()		netdev_update_lockdep_key()
				  -> lockdep_unregister_key()
 -> netif_addr_lock_bh()

because lockdep doesn't provide an API to update it atomically.
Therefore, we have to move it back to static keys and use subclass
for nest locking like before.

In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key
changes"), I already reverted most parts of commit ab92d68fc22f
("net: core: add generic lockdep keys").

This patch reverts the rest and also part of commit f3b0a18bb6cb
("net: remove unnecessary variables and callback"). After this
patch, addr_list_lock changes back to using static keys and
subclasses to satisfy lockdep. Thanks to dev->lower_level, we do
not have to change back to ->ndo_get_lock_subclass().

And hopefully this reduces some syzbot lockdep noises too.

Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: rtnetlink: remove redundant assignment to variable err 2020-04-27T18:14:07+00:00 Colin Ian King colin.king@canonical.com 2020-04-25T11:28:14+00:00 7d3118016787b5c05da94b3bcdb96c9d6ff82c44 The variable err is being initializeed with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The variable err is being initializeed with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: Add IF_OPER_TESTING 2020-04-20T19:43:24+00:00 Andrew Lunn andrew@lunn.ch 2020-04-19T22:11:50+00:00 eec517cdb4810b3843eb7707971de3164088bff1 RFC 2863 defines the operational state testing. Add support for this state, both as a IF_LINK_MODE_ and __LINK_STATE_. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
RFC 2863 defines the operational state testing. Add support for this
state, both as a IF_LINK_MODE_ and __LINK_STATE_.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
xdp: Support specifying expected existing program when attaching XDP 2020-03-28T21:24:41+00:00 Toke Høiland-Jørgensen toke@redhat.com 2020-03-25T17:23:26+00:00 92234c8f15c8d96ad7e52afdc5994cba6be68eb9 While it is currently possible for userspace to specify that an existing XDP program should not be replaced when attaching to an interface, there is no mechanism to safely replace a specific XDP program with another. This patch adds a new netlink attribute, IFLA_XDP_EXPECTED_FD, which can be set along with IFLA_XDP_FD. If set, the kernel will check that the program currently loaded on the interface matches the expected one, and fail the operation if it does not. This corresponds to a 'cmpxchg' memory operation. Setting the new attribute with a negative value means that no program is expected to be attached, which corresponds to setting the UPDATE_IF_NOEXIST flag. A new companion flag, XDP_FLAGS_REPLACE, is also added to explicitly request checking of the EXPECTED_FD attribute. This is needed for userspace to discover whether the kernel supports the new attribute. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/158515700640.92963.3551295145441017022.stgit@toke.dk 
While it is currently possible for userspace to specify that an existing
XDP program should not be replaced when attaching to an interface, there is
no mechanism to safely replace a specific XDP program with another.

This patch adds a new netlink attribute, IFLA_XDP_EXPECTED_FD, which can be
set along with IFLA_XDP_FD. If set, the kernel will check that the program
currently loaded on the interface matches the expected one, and fail the
operation if it does not. This corresponds to a 'cmpxchg' memory operation.
Setting the new attribute with a negative value means that no program is
expected to be attached, which corresponds to setting the UPDATE_IF_NOEXIST
flag.

A new companion flag, XDP_FLAGS_REPLACE, is also added to explicitly
request checking of the EXPECTED_FD attribute. This is needed for userspace
to discover whether the kernel supports the new attribute.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/158515700640.92963.3551295145441017022.stgit@toke.dk
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-02-21T21:39:34+00:00 David S. Miller davem@davemloft.net 2020-02-21T21:39:34+00:00 e65ee2fb54d4745d7b7d9061d7fe33c5c5bf3b06 Conflict resolution of ice_virtchnl_pf.c based upon work by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net> 
Conflict resolution of ice_virtchnl_pf.c based upon work by
Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>