linux.git/net/core/rtnetlink.c, branch v4.19-rc2

net: report invalid mtu value via netlink extack

2018-07-29T19:57:26+00:00

If an invalid MTU value is set through rtnetlink return extra error
information instead of putting message in kernel log. For other cases
where there is no visible API, keep the error report in the log.

Example:
	# ip li set dev enp12s0 mtu 10000
	Error: mtu greater than device maximum.

	# ifconfig enp12s0 mtu 10000
	SIOCSIFMTU: Invalid argument
	# dmesg | tail -1
	[ 2047.795467] enp12s0: mtu greater than device maximum

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

net: report min and max mtu network device settings

2018-07-29T19:57:26+00:00

Report the minimum and maximum MTU allowed on a device
via netlink so that it can be displayed by tools like
ip link.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

xdp: fix uninitialized 'err' variable

2018-07-18T20:32:03+00:00

Smatch caught an uninitialized variable error which GCC seems
to miss.

Fixes: a25717d2b604 ("xdp: support simultaneous driver and hw XDP attachment")
Signed-off-by: Jakub Kicinski 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2018-07-15T01:47:44+00:00

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-15

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various different arm32 JIT improvements in order to optimize code emission
   and make the JIT code itself more robust, from Russell.

2) Support simultaneous driver and offloaded XDP in order to allow for advanced
   use-cases where some work is offloaded to the NIC and some to the host. Also
   add ability for bpftool to load programs and maps beyond just the cgroup case,
   from Jakub.

3) Add BPF JIT support in nfp for multiplication as well as division. For the
   latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong.

4) Add BTF pretty print functionality to bpftool in plain and JSON output
   format, from Okash.

5) Add build and installation to the BPF helper man page into bpftool, from Quentin.

6) Add a TCP BPF callback for listening sockets which is triggered right after
   the socket transitions to TCP_LISTEN state, from Andrey.

7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup
   tree and prints all attached programs, from Roman.

8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged
   packets, from Jesper.
====================

Signed-off-by: David S. Miller

xdp: support simultaneous driver and hw XDP attachment

2018-07-13T18:26:35+00:00

Split the query of HW-attached program from the software one.
Introduce new .ndo_bpf command to query HW-attached program.
This will allow drivers to install different programs in HW
and SW at the same time.  Netlink can now also carry multiple
programs on dump (in which case mode will be set to
XDP_ATTACHED_MULTI and user has to check per-attachment point
attributes, IFLA_XDP_PROG_ID will not be present).  We reuse
IFLA_XDP_PROG_ID skb space for second mode, so rtnl_xdp_size()
doesn't need to be updated.

Note that the installation side is still not there, since all
drivers currently reject installing more than one program at
the time.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Signed-off-by: Daniel Borkmann

xdp: don't make drivers report attachment mode

2018-07-13T18:26:35+00:00

prog_attached of struct netdev_bpf should have been superseded
by simply setting prog_id long time ago, but we kept it around
to allow offloading drivers to communicate attachment mode (drv
vs hw).  Subsequently drivers were also allowed to report back
attachment flags (prog_flags), and since nowadays only programs
attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell
the attachment mode from the flags driver reports.  Remove
prog_attached member.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Signed-off-by: Daniel Borkmann

xdp: add per mode attributes for attached programs

2018-07-13T18:26:35+00:00

In preparation for support of simultaneous driver and hardware XDP
support add per-mode attributes.  The catch-all IFLA_XDP_PROG_ID
will still be reported, but user space can now also access the
program ID in a new IFLA_XDP__PROG_ID attribute.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Signed-off-by: Daniel Borkmann

rtnetlink: add rtnl_link_state check in rtnl_configure_link

2018-07-07T11:20:46+00:00

rtnl_configure_link sets dev->rtnl_link_state to
RTNL_LINK_INITIALIZED and unconditionally calls
__dev_notify_flags to notify user-space of dev flags.

current call sequence for rtnl_configure_link
rtnetlink_newlink
    rtnl_link_ops->newlink
    rtnl_configure_link (unconditionally notifies userspace of
                         default and new dev flags)

If a newlink handler wants to call rtnl_configure_link
early, we will end up with duplicate notifications to
user-space.

This patch fixes rtnl_configure_link to check rtnl_link_state
and call __dev_notify_flags with gchanges = 0 if already
RTNL_LINK_INITIALIZED.

Later in the series, this patch will help the following sequence
where a driver implementing newlink can call rtnl_configure_link
to initialize the link early.

makes the following call sequence work:
rtnetlink_newlink
    rtnl_link_ops->newlink (vxlan) -> rtnl_configure_link (initializes
                                                link and notifies
                                                user-space of default
                                                dev flags)
    rtnl_configure_link (updates dev flags if requested by user ifm
                         and notifies user-space of new dev flags)

Signed-off-by: Roopa Prabhu 
Signed-off-by: David S. Miller

rtnetlink: validate attributes in do_setlink()

2018-06-05T16:45:29+00:00

It seems that rtnl_group_changelink() can call do_setlink
while a prior call to validate_linkmsg(dev = NULL, ...) could
not validate IFLA_ADDRESS / IFLA_BROADCAST

Make sure do_setlink() calls validate_linkmsg() instead
of letting its callers having this responsibility.

With help from Dmitry Vyukov, thanks a lot !

BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
BUG: KMSAN: uninit-value in eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
BUG: KMSAN: uninit-value in eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
CPU: 1 PID: 8695 Comm: syz-executor3 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
 __msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
 is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
 eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
 eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
 dev_set_mac_address+0x261/0x530 net/core/dev.c:7157
 do_setlink+0xbc3/0x5fc0 net/core/rtnetlink.c:2317
 rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
 rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:00007fc07480ec68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fc07480f6d4 RCX: 0000000000455a09
RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000014
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000005d0 R14: 00000000006fdc20 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527
 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:478
 do_setlink+0xb84/0x5fc0 net/core/rtnetlink.c:2315
 rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
 rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2753 [inline]
 __kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:988 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
 netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e7ed828f10bd ("netlink: support setting devgroup parameters")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Cc: Dmitry Vyukov 
Signed-off-by: David S. Miller

rtnetlink: Fix null-ptr-deref in rtnl_newlink

2018-06-01T14:39:24+00:00

In rtnl_newlink(), NULL check is performed on m_ops however member of
ops is accessed. Fixed by accessing member of m_ops instead of ops.

[  345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110
[  345.432629] Read of size 4 at addr 0000000000000088 by task ip/986
[  345.432629]
[  345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9
[  345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  345.432629] Call Trace:
[  345.432629]  dump_stack+0xc6/0x150
[  345.432629]  ? dump_stack_print_info.cold.0+0x1b/0x1b
[  345.432629]  ? kasan_report+0xb4/0x410
[  345.432629]  kasan_report.cold.4+0x8f/0x91
[  345.432629]  ? rtnl_newlink+0x400/0x1110
[  345.432629]  rtnl_newlink+0x400/0x1110
[...]

Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage")
Signed-off-by: Prashant Bhole 
Tested-by: Ido Schimmel 
Signed-off-by: David S. Miller