linux.git/net/core/devlink.c, branch v5.10-rc2 Linux kernel source tree devlink: Unlock on error in dumpit() 2020-10-28T00:05:57+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-10-26T08:01:27+00:00 0d8cb9464a7d9c3e6349db3f7719a80f3793347e This needs to unlock before returning. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
This needs to unlock before returning.

Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Fix some error codes 2020-10-28T00:05:57+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-10-26T08:00:59+00:00 6c211809c87f0de939f3bd60ceec05338ae6eba1 These paths don't set the error codes. It's especially important in devlink_nl_region_notify_build() where it leads to a NULL dereference in the caller. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080059.GA1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
These paths don't set the error codes.  It's especially important in
devlink_nl_region_notify_build() where it leads to a NULL dereference in
the caller.

Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201026080059.GA1628785@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Add enable_remote_dev_reset generic parameter 2020-10-09T19:06:53+00:00 Moshe Shemesh moshe@mellanox.com 2020-10-07T06:00:53+00:00 195d9dece1686576ad1c7b45942b5cf9eacb3fbf The enable_remote_dev_reset devlink param flags that the host admin allows device resets that can be initiated by other hosts. This parameter is useful for setups where a device is shared by different hosts, such as multi-host setup. Once the user set this parameter to false, the driver should NACK any attempt to reset the device while the driver is loaded. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The enable_remote_dev_reset devlink param flags that the host admin
allows device resets that can be initiated by other hosts. This
parameter is useful for setups where a device is shared by different
hosts, such as multi-host setup. Once the user set this parameter to
false, the driver should NACK any attempt to reset the device while the
driver is loaded.

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Add remote reload stats 2020-10-09T19:06:52+00:00 Moshe Shemesh moshe@mellanox.com 2020-10-07T06:00:46+00:00 77069ba2e3adf48c472fbbd9cbd7a4f5370b17df Add remote reload stats to hold the history of actions performed due devlink reload commands initiated by remote host. For example, in case firmware activation with reset finished successfully but was initiated by remote host. The function devlink_remote_reload_actions_performed() is exported to enable drivers update on remote reload actions performed as it was not initiated by their own devlink instance. Expose devlink remote reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 remote_reload: driver_reinit 0 fw_activate 0 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 remote_reload: driver_reinit 1 fw_activate 1 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 0, "fw_activate": 0, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 1, "fw_activate": 1, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add remote reload stats to hold the history of actions performed due
devlink reload commands initiated by remote host. For example, in case
firmware activation with reset finished successfully but was initiated
by remote host.

The function devlink_remote_reload_actions_performed() is exported to
enable drivers update on remote reload actions performed as it was not
initiated by their own devlink instance.

Expose devlink remote reload stats to the user through devlink dev get
command.

Examples:
$ devlink dev show
pci/0000:82:00.0:
  stats:
      reload:
        driver_reinit 2 fw_activate 1 fw_activate_no_reset 0
      remote_reload:
        driver_reinit 0 fw_activate 0 fw_activate_no_reset 0
pci/0000:82:00.1:
  stats:
      reload:
        driver_reinit 1 fw_activate 0 fw_activate_no_reset 0
      remote_reload:
        driver_reinit 1 fw_activate 1 fw_activate_no_reset 0

$ devlink dev show -jp
{
    "dev": {
        "pci/0000:82:00.0": {
            "stats": {
                "reload": {
                    "driver_reinit": 2,
                    "fw_activate": 1,
                    "fw_activate_no_reset": 0
                },
                "remote_reload": {
                    "driver_reinit": 0,
                    "fw_activate": 0,
                    "fw_activate_no_reset": 0
                }
            }
        },
        "pci/0000:82:00.1": {
            "stats": {
                "reload": {
                    "driver_reinit": 1,
                    "fw_activate": 0,
                    "fw_activate_no_reset": 0
                },
                "remote_reload": {
                    "driver_reinit": 1,
                    "fw_activate": 1,
                    "fw_activate_no_reset": 0
                }
            }
        }
    }
}

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Add reload stats 2020-10-09T19:06:52+00:00 Moshe Shemesh moshe@mellanox.com 2020-10-07T06:00:45+00:00 a254c264267e8746fb257806c166e54375cf9c06 Add reload stats to hold the history per reload action type and limit. For example, the number of times fw_activate has been performed on this device since the driver module was added or if the firmware activation was performed with or without reset. Add devlink notification on stats update. Expose devlink reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add reload stats to hold the history per reload action type and limit.

For example, the number of times fw_activate has been performed on this
device since the driver module was added or if the firmware activation
was performed with or without reset.

Add devlink notification on stats update.

Expose devlink reload stats to the user through devlink dev get command.

Examples:
$ devlink dev show
pci/0000:82:00.0:
  stats:
      reload:
        driver_reinit 2 fw_activate 1 fw_activate_no_reset 0
pci/0000:82:00.1:
  stats:
      reload:
        driver_reinit 1 fw_activate 0 fw_activate_no_reset 0

$ devlink dev show -jp
{
    "dev": {
        "pci/0000:82:00.0": {
            "stats": {
                "reload": {
                    "driver_reinit": 2,
                    "fw_activate": 1,
                    "fw_activate_no_reset": 0
                }
            }
        },
        "pci/0000:82:00.1": {
            "stats": {
                "reload": {
                    "driver_reinit": 1,
                    "fw_activate": 0,
                    "fw_activate_no_reset": 0
                }
            }
        }
    }
}

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Add devlink reload limit option 2020-10-09T19:06:52+00:00 Moshe Shemesh moshe@mellanox.com 2020-10-07T06:00:44+00:00 dc64cc7c63102ac78bac3cfbc00ef3abd7a3fdf3 Add reload limit to demand restrictions on reload actions. Reload limits supported: no_reset: No reset allowed, no down time allowed, no link flap and no configuration is lost. By default reload limit is unspecified and so no constraints on reload actions are required. Some combinations of action and limit are invalid. For example, driver can not reinitialize its entities without any downtime. The no_reset reload limit will have usecase in this patchset to implement restricted fw_activate on mlx5. Have the uapi parameter of reload limit ready for future support of multiselection. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add reload limit to demand restrictions on reload actions.
Reload limits supported:
no_reset: No reset allowed, no down time allowed, no link flap and no
          configuration is lost.

By default reload limit is unspecified and so no constraints on reload
actions are required.

Some combinations of action and limit are invalid. For example, driver
can not reinitialize its entities without any downtime.

The no_reset reload limit will have usecase in this patchset to
implement restricted fw_activate on mlx5.

Have the uapi parameter of reload limit ready for future support of
multiselection.

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Add reload action option to devlink reload command 2020-10-09T19:06:52+00:00 Moshe Shemesh moshe@mellanox.com 2020-10-07T06:00:43+00:00 ccdf07219da6bd1f43c6ddcde4c0e36993c7365a Add devlink reload action to allow the user to request a specific reload action. The action parameter is optional, if not specified then devlink driver re-init action is used (backward compatible). Note that when required to do firmware activation some drivers may need to reload the driver. On the other hand some drivers may need to reset the firmware to reinitialize the driver entities. Therefore, the devlink reload command returns the actions which were actually performed. Reload actions supported are: driver_reinit: driver entities re-initialization, applying devlink-param and devlink-resource values. fw_activate: firmware activate. command examples: $devlink dev reload pci/0000:82:00.0 action driver_reinit reload_actions_performed: driver_reinit $devlink dev reload pci/0000:82:00.0 action fw_activate reload_actions_performed: driver_reinit fw_activate Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add devlink reload action to allow the user to request a specific reload
action. The action parameter is optional, if not specified then devlink
driver re-init action is used (backward compatible).
Note that when required to do firmware activation some drivers may need
to reload the driver. On the other hand some drivers may need to reset
the firmware to reinitialize the driver entities. Therefore, the devlink
reload command returns the actions which were actually performed.
Reload actions supported are:
driver_reinit: driver entities re-initialization, applying devlink-param
               and devlink-resource values.
fw_activate: firmware activate.

command examples:
$devlink dev reload pci/0000:82:00.0 action driver_reinit
reload_actions_performed:
  driver_reinit

$devlink dev reload pci/0000:82:00.0 action fw_activate
reload_actions_performed:
  driver_reinit fw_activate

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Change devlink_reload_supported() param type 2020-10-09T19:06:52+00:00 Moshe Shemesh moshe@mellanox.com 2020-10-07T06:00:42+00:00 69d56e0ea0ee9c61fa70c144449945ebaedb9dfa Change devlink_reload_supported() function to get devlink_ops pointer param instead of devlink pointer param. This change will be used in the next patch to check if devlink reload is supported before devlink instance is allocated. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Change devlink_reload_supported() function to get devlink_ops pointer
param instead of devlink pointer param.
This change will be used in the next patch to check if devlink reload is
supported before devlink instance is allocated.

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: devlink: Add support for port regions 2020-10-04T21:38:53+00:00 Andrew Lunn andrew@lunn.ch 2020-10-04T16:12:54+00:00 544e7c33ec2f8077685c254f5e3b03a85c0e62eb Allow regions to be registered to a devlink port. The same netlink API is used, but the port index is provided to indicate when a region is a port region as opposed to a device region. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Allow regions to be registered to a devlink port. The same netlink API
is used, but the port index is provided to indicate when a region is a
port region as opposed to a device region.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: devlink: Add unused port flavour 2020-10-04T21:38:52+00:00 Andrew Lunn andrew@lunn.ch 2020-10-04T16:12:51+00:00 cf1166349c68816f4259d32559f54972b0d5c1a4 Not all ports of a switch need to be used, particularly in embedded systems. Add a port flavour for ports which physically exist in the switch, but are not connected to the front panel etc, and so are unused. By having unused ports present in devlink, it gives a more accurate representation of the hardware. It also allows regions to be associated to such ports, so allowing, for example, to determine unused ports are correctly powered off, or to compare probable reset defaults of unused ports to used ports experiences issues. Actually registering unused ports and setting the flavour to unused is optional. The DSA core will register all such switch ports, but such ports are expected to be limited in number. Bigger ASICs may decide not to list unused ports. v2: Expand the description about why it is useful Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Not all ports of a switch need to be used, particularly in embedded
systems. Add a port flavour for ports which physically exist in the
switch, but are not connected to the front panel etc, and so are
unused. By having unused ports present in devlink, it gives a more
accurate representation of the hardware. It also allows regions to be
associated to such ports, so allowing, for example, to determine
unused ports are correctly powered off, or to compare probable reset
defaults of unused ports to used ports experiences issues.

Actually registering unused ports and setting the flavour to unused is
optional. The DSA core will register all such switch ports, but such
ports are expected to be limited in number. Bigger ASICs may decide
not to list unused ports.

v2:
Expand the description about why it is useful

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>