linux.git/net/core/dev.c, branch v6.6

net: move altnames together with the netdevice

2023-10-19T13:51:16+00:00

The altname nodes are currently not moved to the new netns
when netdevice itself moves:

  [ ~]# ip netns add test
  [ ~]# ip -netns test link add name eth0 type dummy
  [ ~]# ip -netns test link property add dev eth0 altname some-name
  [ ~]# ip -netns test link show dev some-name
  2: eth0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff
      altname some-name
  [ ~]# ip -netns test link set dev eth0 netns 1
  [ ~]# ip link
  ...
  3: eth0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
      altname some-name
  [ ~]# ip li show dev some-name
  Device "some-name" does not exist.

Remove them from the hash table when device is unlisted
and add back when listed again.

Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Paolo Abeni

net: avoid UAF on deleted altname

2023-10-19T13:51:16+00:00

Altnames are accessed under RCU (dev_get_by_name_rcu())
but freed by kfree() with no synchronization point.

Each node has one or two allocations (node and a variable-size
name, sometimes the name is netdev->name). Adding rcu_heads
here is a bit tedious. Besides most code which unlists the names
already has rcu barriers - so take the simpler approach of adding
synchronize_rcu(). Note that the one on the unregistration path
(which matters more) is removed by the next fix.

Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Paolo Abeni

net: check for altname conflicts when changing netdev's netns

2023-10-19T13:51:16+00:00

It's currently possible to create an altname conflicting
with an altname or real name of another device by creating
it in another netns and moving it over:

 [ ~]$ ip link add dev eth0 type dummy

 [ ~]$ ip netns add test
 [ ~]$ ip -netns test link add dev ethX netns test type dummy
 [ ~]$ ip -netns test link property add dev ethX altname eth0
 [ ~]$ ip -netns test link set dev ethX netns 1

 [ ~]$ ip link
 ...
 3: eth0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
 ...
 5: ethX:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 26:b7:28:78:38:0f brd ff:ff:ff:ff:ff:ff
     altname eth0

Create a macro for walking the altnames, this hopefully makes
it clearer that the list we walk contains only altnames.
Which is otherwise not entirely intuitive.

Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Paolo Abeni

net: fix ifname in netlink ntf during netns move

2023-10-19T13:51:16+00:00

dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.

Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:

 5: eth0:  mtu 1500 qdisc noop state DOWN group default
     link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
 6: eth1:  mtu 1500 qdisc noop state DOWN group default
     link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff

 [ ~]# ip link set dev eth0 netns 1 name eth1

ip monitor inside netns:
 Deleted inet eth0
 Deleted inet6 eth0
 Deleted 5: eth1:  mtu 1500 qdisc noop state DOWN group default
     link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7

Name is reported as eth1 in old netns for ifindex 5, already renamed.

Fixes: d90310243fd7 ("net: device name allocation cleanups")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Jiri Pirko 
Signed-off-by: Paolo Abeni

net: refine debug info in skb_checksum_help()

2023-10-10T02:46:41+00:00

syzbot uses panic_on_warn.

This means that the skb_dump() I added in the blamed commit are
not even called.

Rewrite this so that we get the needed skb dump before syzbot crashes.

Fixes: eeee4b77dc52 ("net: add more debug info in skb_checksum_help()")
Signed-off-by: Eric Dumazet 
Reported-by: Willem de Bruijn 
Reviewed-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20231006173355.2254983-1-edumazet@google.com
Signed-off-by: Jakub Kicinski

net: core: Use the bitmap API to allocate bitmaps

2023-09-16T12:32:30+00:00

Use bitmap_zalloc() and bitmap_free() instead of hand-writing them.
It is less verbose and it improves the type checking and semantic.

While at it, add missing header inclusion (should be bitops.h,
but with the above change it becomes bitmap.h).

Suggested-by: Sergey Ryazanov 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230911154534.4174265-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko 
Reviewed-by: Przemek Kitszel 
Signed-off-by: David S. Miller

net: Make consumed action consistent in sch_handle_egress

2023-08-28T09:18:03+00:00

While looking at TC_ACT_* handling, the TC_ACT_CONSUMED is only handled in
sch_handle_ingress but not sch_handle_egress. This was added via cd11b164073b
("net/tc: introduce TC_ACT_REINSERT.") and e5cf1baf92cb ("act_mirred: use
TC_ACT_REINSERT when possible") and later got renamed into TC_ACT_CONSUMED
via 720f22fed81b ("net: sched: refactor reinsert action").

The initial work was targeted for ovs back then and only needed on ingress,
and the mirred action module also restricts it to only that. However, given
it's an API contract it would still make sense to make this consistent to
sch_handle_ingress and handle it on egress side in the same way, that is,
setting return code to "success" and returning NULL back to the caller as
otherwise an action module sitting on egress returning TC_ACT_CONSUMED could
lead to an UAF when untreated.

Signed-off-by: Daniel Borkmann 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

net: Fix skb consume leak in sch_handle_egress

2023-08-28T09:18:03+00:00

Fix a memory leak for the tc egress path with TC_ACT_{STOLEN,QUEUED,TRAP}:

  [...]
  unreferenced object 0xffff88818bcb4f00 (size 232):
  comm "softirq", pid 0, jiffies 4299085078 (age 134.028s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 80 70 61 81 88 ff ff 00 41 31 14 81 88 ff ff  ..pa.....A1.....
  backtrace:
    [] kmem_cache_alloc_node+0x268/0x400
    [] __alloc_skb+0x211/0x2c0
    [] alloc_skb_with_frags+0xbe/0x6b0
    [] sock_alloc_send_pskb+0x6a9/0x870
    [] __ip_append_data+0x14d0/0x3bf0
    [] ip_append_data+0xee/0x190
    [] icmp_push_reply+0xa6/0x470
    [] icmp_reply+0x900/0xa00
    [] icmp_echo.part.0+0x1a3/0x230
    [] icmp_echo+0xcd/0x190
    [] icmp_rcv+0x806/0xe10
    [] ip_protocol_deliver_rcu+0x351/0x3d0
    [] ip_local_deliver_finish+0x2b4/0x450
    [] ip_local_deliver+0x174/0x1f0
    [] ip_sublist_rcv_finish+0x1f2/0x420
    [] ip_sublist_rcv+0x466/0x920
  [...]

I was able to reproduce this via:

  ip link add dev dummy0 type dummy
  ip link set dev dummy0 up
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 egress protocol ip prio 1 u32 match ip protocol 1 0xff action mirred egress redirect dev dummy0
  ping 1.1.1.1
  

After the fix, there are no kmemleak reports with the reproducer. This is
in line with what is also done on the ingress side, and from debugging the
skb_unref(skb) on dummy xmit and sch_handle_egress() side, it is visible
that these are two different skbs with both skb_unref(skb) as true. The two
seen skbs are due to mirred doing a skb_clone() internally as use_reinsert
is false in tcf_mirred_act() for egress. This was initially reported by Gal.

Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: Gal Pressman 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/bdfc2640-8f65-5b56-4472-db8e2b161aab@nvidia.com
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

net: warn about attempts to register negative ifindex

2023-08-16T02:18:34+00:00

Since the xarray changes we mix returning valid ifindex and negative
errno in a single int returned from dev_index_reserve(). This depends
on the fact that ifindexes can't be negative. Otherwise we may insert
into the xarray and return a very large negative value. This in turn
may break ERR_PTR().

OvS is susceptible to this problem and lacking validation (fix posted
separately for net).

Reject negative ifindex explicitly. Add a warning because the input
validation is better handled by the caller.

Reviewed-by: Leon Romanovsky 
Link: https://lore.kernel.org/r/20230814205627.2914583-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2023-08-03T22:34:36+00:00

Martin KaFai Lau says:

====================
pull-request: bpf-next 2023-08-03

We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).

The main changes are:

1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
   Daniel Borkmann

2) Support new insns from cpu v4 from Yonghong Song

3) Non-atomically allocate freelist during prefill from YiFei Zhu

4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu

5) Add tracepoint to xdp attaching failure from Leon Hwang

6) struct netdev_rx_queue and xdp.h reshuffling to reduce
   rebuild time from Jakub Kicinski

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
  net: invert the netdevice.h vs xdp.h dependency
  net: move struct netdev_rx_queue out of netdevice.h
  eth: add missing xdp.h includes in drivers
  selftests/bpf: Add testcase for xdp attaching failure tracepoint
  bpf, xdp: Add tracepoint to xdp attaching failure
  selftests/bpf: fix static assert compilation issue for test_cls_*.c
  bpf: fix bpf_probe_read_kernel prototype mismatch
  riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
  libbpf: fix typos in Makefile
  tracing: bpf: use struct trace_entry in struct syscall_tp_t
  bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
  bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
  netfilter: bpf: Only define get_proto_defrag_hook() if necessary
  bpf: Fix an array-index-out-of-bounds issue in disasm.c
  net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
  docs/bpf: Fix malformed documentation
  bpf: selftests: Add defrag selftests
  bpf: selftests: Support custom type and proto for client sockets
  bpf: selftests: Support not connecting client socket
  netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
  ...
====================

Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski