linux.git/net/core/dev.c, branch v5.2-rc2 Linux kernel source tree net: avoid weird emergency message 2019-05-16T21:25:58+00:00 Eric Dumazet edumazet@google.com 2019-05-16T15:09:57+00:00 d7c04b05c9ca14c55309eb139430283a45c4c25f When host is under high stress, it is very possible thread running netdev_wait_allrefs() returns from msleep(250) 10 seconds late. This leads to these messages in the syslog : [...] unregister_netdevice: waiting for syz_tun to become free. Usage count = 0 If the device refcount is zero, the wait is over. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When host is under high stress, it is very possible thread
running netdev_wait_allrefs() returns from msleep(250)
10 seconds late.

This leads to these messages in the syslog :

[...] unregister_netdevice: waiting for syz_tun to become free. Usage count = 0

If the device refcount is zero, the wait is over.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: use indirect calls helpers for ptype hook 2019-05-05T17:38:04+00:00 Paolo Abeni pabeni@redhat.com 2019-05-03T15:01:36+00:00 f5737cbadb7d07c4f71fc5f073ccc7d8d8985a8f This avoids an indirect call per RX IPv6/IPv4 packet. Note that we don't want to use the indirect calls helper for taps. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This avoids an indirect call per RX IPv6/IPv4 packet.
Note that we don't want to use the indirect calls helper for taps.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-04-17T18:26:25+00:00 David S. Miller davem@davemloft.net 2019-04-17T18:26:25+00:00 6b0a7f84ea1fe248df96ccc4dd86e817e32ef65b Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net> 
Conflict resolution of af_smc.c from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
failover: allow name change on IFF_UP slave interfaces 2019-04-11T05:12:26+00:00 Si-Wei Liu si-wei.liu@oracle.com 2019-04-08T23:45:27+00:00 8065a779f17e94536a1c4dcee4f9d88011672f97 When a netdev appears through hot plug then gets enslaved by a failover master that is already up and running, the slave will be opened right away after getting enslaved. Today there's a race that userspace (udev) may fail to rename the slave if the kernel (net_failover) opens the slave earlier than when the userspace rename happens. Unlike bond or team, the primary slave of failover can't be renamed by userspace ahead of time, since the kernel initiated auto-enslavement is unable to, or rather, is never meant to be synchronized with the rename request from userspace. As the failover slave interfaces are not designed to be operated directly by userspace apps: IP configuration, filter rules with regard to network traffic passing and etc., should all be done on master interface. In general, userspace apps only care about the name of master interface, while slave names are less important as long as admin users can see reliable names that may carry other information describing the netdev. For e.g., they can infer that "ens3nsby" is a standby slave of "ens3", while for a name like "eth0" they can't tell which master it belongs to. Historically the name of IFF_UP interface can't be changed because there might be admin script or management software that is already relying on such behavior and assumes that the slave name can't be changed once UP. But failover is special: with the in-kernel auto-enslavement mechanism, the userspace expectation for device enumeration and bring-up order is already broken. Previously initramfs and various userspace config tools were modified to bypass failover slaves because of auto-enslavement and duplicate MAC address. Similarly, in case that users care about seeing reliable slave name, the new type of failover slaves needs to be taken care of specifically in userspace anyway. It's less risky to lift up the rename restriction on failover slave which is already UP. Although it's possible this change may potentially break userspace component (most likely configuration scripts or management software) that assumes slave name can't be changed while UP, it's relatively a limited and controllable set among all userspace components, which can be fixed specifically to listen for the rename events on failover slaves. Userspace component interacting with slaves is expected to be changed to operate on failover master interface instead, as the failover slave is dynamic in nature which may come and go at any point. The goal is to make the role of failover slaves less relevant, and userspace components should only deal with failover master in the long run. Fixes: 30c8bd5aa8b2 ("net: Introduce generic failover module") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When a netdev appears through hot plug then gets enslaved by a failover
master that is already up and running, the slave will be opened
right away after getting enslaved. Today there's a race that userspace
(udev) may fail to rename the slave if the kernel (net_failover)
opens the slave earlier than when the userspace rename happens.
Unlike bond or team, the primary slave of failover can't be renamed by
userspace ahead of time, since the kernel initiated auto-enslavement is
unable to, or rather, is never meant to be synchronized with the rename
request from userspace.

As the failover slave interfaces are not designed to be operated
directly by userspace apps: IP configuration, filter rules with
regard to network traffic passing and etc., should all be done on master
interface. In general, userspace apps only care about the
name of master interface, while slave names are less important as long
as admin users can see reliable names that may carry
other information describing the netdev. For e.g., they can infer that
"ens3nsby" is a standby slave of "ens3", while for a
name like "eth0" they can't tell which master it belongs to.

Historically the name of IFF_UP interface can't be changed because
there might be admin script or management software that is already
relying on such behavior and assumes that the slave name can't be
changed once UP. But failover is special: with the in-kernel
auto-enslavement mechanism, the userspace expectation for device
enumeration and bring-up order is already broken. Previously initramfs
and various userspace config tools were modified to bypass failover
slaves because of auto-enslavement and duplicate MAC address. Similarly,
in case that users care about seeing reliable slave name, the new type
of failover slaves needs to be taken care of specifically in userspace
anyway.

It's less risky to lift up the rename restriction on failover slave
which is already UP. Although it's possible this change may potentially
break userspace component (most likely configuration scripts or
management software) that assumes slave name can't be changed while
UP, it's relatively a limited and controllable set among all userspace
components, which can be fixed specifically to listen for the rename
events on failover slaves. Userspace component interacting with slaves
is expected to be changed to operate on failover master interface
instead, as the failover slave is dynamic in nature which may come and
go at any point.  The goal is to make the role of failover slaves less
relevant, and userspace components should only deal with failover master
in the long run.

Fixes: 30c8bd5aa8b2 ("net: Introduce generic failover module")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-04-05T21:14:19+00:00 David S. Miller davem@davemloft.net 2019-04-05T21:14:19+00:00 f83f7151950dd9e0f6b4a1a405bf5e55c5294e4d Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net> 
Minor comment merge conflict in mlx5.

Staging driver has a fixup due to the skb->xmit_more changes
in 'net-next', but was removed in 'net'.

Signed-off-by: David S. Miller <davem@davemloft.net>
net: devlink: introduce devlink_compat_switch_id_get() helper 2019-04-05T00:42:36+00:00 Jiri Pirko jiri@mellanox.com 2019-04-03T12:24:17+00:00 7e1146e8c10c00f859843817da8ecc5d902ea409 Introduce devlink_compat_switch_id_get() helper which fills up switch_id according to passed netdev pointer. Call it directly from dev_get_port_parent_id() as a fallback when ndo_get_port_parent_id is not defined for given netdev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Introduce devlink_compat_switch_id_get() helper which fills up switch_id
according to passed netdev pointer. Call it directly from
dev_get_port_parent_id() as a fallback when ndo_get_port_parent_id
is not defined for given netdev.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: Remove inclusion of pci.h 2019-04-05T00:38:20+00:00 Yuval Shaia yuval.shaia@oracle.com 2019-04-03T09:15:07+00:00 a0640e610f7bc02935092ca7be1b45b1381425b0 This header is not in use - remove it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This header is not in use - remove it.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: place xmit recursion in softnet data 2019-04-02T01:35:02+00:00 Florian Westphal fw@strlen.de 2019-04-01T14:42:13+00:00 97cdcf37b57e3f204be3000b9eab9686f38b4356 This fills a hole in softnet data, so no change in structure size. Also prepares for xmit_more placement in the same spot; skb->xmit_more will be removed in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
This fills a hole in softnet data, so no change in structure size.

Also prepares for xmit_more placement in the same spot;
skb->xmit_more will be removed in followup patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: core: netif_receive_skb_list: unlist skb before passing to pt->func 2019-03-29T00:28:05+00:00 Alexander Lobakin alobakin@dlink.ru 2019-03-28T15:23:04+00:00 9a5a90d167b0e5fe3d47af16b68fd09ce64085cd __netif_receive_skb_list_ptype() leaves skb->next poisoned before passing it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA setup) crashes like: [ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c [ 88.618666] Oops[#1]: [ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473 [ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850 [ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000 [ 88.642526] $ 8 : 00000000 49600000 00000001 00000001 [ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41 [ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd [ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800 [ 88.665793] $24 : 00000000 8011e658 [ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c [ 88.677427] Hi : 00000003 [ 88.680622] Lo : 7b5b4220 [ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0 [ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188 [ 88.696734] Status: 10000404 IEp [ 88.700422] Cause : 50000008 (ExcCode 02) [ 88.704874] BadVA : 0000000e [ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi)) [ 88.713005] Modules linked in: [ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c [ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000 [ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c [ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50 [ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800 [ 88.771770] ... [ 88.774483] Call Trace: [ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0 [ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188 [ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4 [ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0 [ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140 [ 88.805526] [<805a68f4>] ip_forward+0x364/0x560 [ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4 [ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58 [ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac [ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c [ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394 [ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828 [ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc [ 88.850835] [<806ad300>] __do_softirq+0x178/0x338 [ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100 [ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144 [ 88.866477] [<80105974>] handle_int+0x14c/0x158 [ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40 [ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a [ 88.887332] [ 88.888982] ---[ end trace eb863d007da11cf1 ]--- [ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt [ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this by pulling skb off the sublist and zeroing skb->next pointer before calling ptype callback. Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup") Reviewed-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Signed-off-by: David S. Miller <davem@davemloft.net> 
__netif_receive_skb_list_ptype() leaves skb->next poisoned before passing
it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA
setup) crashes like:

[ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c
[ 88.618666] Oops[#1]:
[ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473
[ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850
[ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000
[ 88.642526] $ 8 : 00000000 49600000 00000001 00000001
[ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41
[ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd
[ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800
[ 88.665793] $24 : 00000000 8011e658
[ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c
[ 88.677427] Hi : 00000003
[ 88.680622] Lo : 7b5b4220
[ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188
[ 88.696734] Status: 10000404	IEp
[ 88.700422] Cause : 50000008 (ExcCode 02)
[ 88.704874] BadVA : 0000000e
[ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi))
[ 88.713005] Modules linked in:
[ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c
[ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000
[ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c
[ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50
[ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800
[ 88.771770] ...
[ 88.774483] Call Trace:
[ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188
[ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4
[ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0
[ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140
[ 88.805526] [<805a68f4>] ip_forward+0x364/0x560
[ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4
[ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58
[ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac
[ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c
[ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394
[ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828
[ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc
[ 88.850835] [<806ad300>] __do_softirq+0x178/0x338
[ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100
[ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144
[ 88.866477] [<80105974>] handle_int+0x14c/0x158
[ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40
[ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a
[ 88.887332]
[ 88.888982] ---[ end trace eb863d007da11cf1 ]---
[ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt
[ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this by pulling skb off the sublist and zeroing skb->next pointer
before calling ptype callback.

Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: devlink: introduce devlink_compat_phys_port_name_get() 2019-03-28T19:55:30+00:00 Jiri Pirko jiri@mellanox.com 2019-03-28T12:56:37+00:00 af3836df9a59e7339d60c9c46729a7d9094d0582 Introduce devlink_compat_phys_port_name_get() helper that gets the physical port name for specified netdevice according to devlink port attributes. Call this helper from dev_get_phys_port_name() in case ndo_get_phys_port_name is not defined. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Introduce devlink_compat_phys_port_name_get() helper that
gets the physical port name for specified netdevice
according to devlink port attributes.
Call this helper from dev_get_phys_port_name()
in case ndo_get_phys_port_name is not defined.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>