linux.git/net/can, branch v5.15

can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path

2021-10-19T07:10:30+00:00

When the a large chunk of data send and the receiver does not send a
Flow Control frame back in time, the sendmsg() does not return a error
code, but the number of bytes sent corresponding to the size of the
packet.

If a timeout occurs the isotp_tx_timer_handler() is fired, sets
sk->sk_err and calls the sk->sk_error_report() function. It was
wrongly expected that the error would be propagated to user space in
every case. For isotp_sendmsg() blocking on wait_event_interruptible()
this is not the case.

This patch fixes the problem by checking if sk->sk_err is set and
returning the error to user space.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/42
Link: https://github.com/hartkopp/can-isotp/pull/43
Link: https://lore.kernel.org/all/20210507091839.1366379-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Sottas Guillaume (LMB) 
Tested-by: Oliver Hartkopp 
Signed-off-by: Marc Kleine-Budde

can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()

2021-10-17T12:18:21+00:00

When isotp_sendmsg() concurrent, tx.state of all TX processes can be
ISOTP_IDLE. The conditions so->tx.state != ISOTP_IDLE and
wq_has_sleeper(&so->wait) can not protect TX buffer from being
accessed by multiple TX processes.

We can use cmpxchg() to try to modify tx.state to ISOTP_SENDING firstly.
If the modification of the previous process succeed, the later process
must wait tx.state to ISOTP_IDLE firstly. Thus, we can ensure TX buffer
is accessed by only one process at the same time. And we should also
restore the original tx.state at the subsequent error processes.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/c2517874fbdf4188585cf9ddf67a8fa74d5dbde5.1633764159.git.william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Ziyang Xuan 
Acked-by: Oliver Hartkopp 
Signed-off-by: Marc Kleine-Budde

can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible()

2021-10-17T12:17:55+00:00

Using wait_event_interruptible() to wait for complete transmission,
but do not check the result of wait_event_interruptible() which can be
interrupted. It will result in TX buffer has multiple accessors and
the later process interferes with the previous process.

Following is one of the problems reported by syzbot.

=============================================================
WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0
Call Trace:
 
 ? isotp_setsockopt+0x390/0x390
 __hrtimer_run_queues+0xb8/0x610
 hrtimer_run_softirq+0x91/0xd0
 ? rcu_read_lock_sched_held+0x4d/0x80
 __do_softirq+0xe8/0x553
 irq_exit_rcu+0xf8/0x100
 sysvec_apic_timer_interrupt+0x9e/0xc0
 
 asm_sysvec_apic_timer_interrupt+0x12/0x20

Add result check for wait_event_interruptible() in isotp_sendmsg()
to avoid multiple accessers for tx buffer.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/10ca695732c9dd267c76a3c30f37aefe1ff7e32f.1633764159.git.william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Reported-by: syzbot+78bab6958a614b0c80b9@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan 
Acked-by: Oliver Hartkopp 
Signed-off-by: Marc Kleine-Budde

can: j1939: j1939_xtp_rx_rts_session_new(): abort TP less than 9 bytes

2021-10-17T12:12:57+00:00

The receiver should abort TP if 'total message size' in TP.CM_RTS and
TP.CM_BAM is less than 9 or greater than 1785 [1], but currently the
j1939 stack only checks the upper bound and the receiver will accept
the following broadcast message:

  vcan1  18ECFF00   [8]  20 08 00 02 FF 00 23 01
  vcan1  18EBFF00   [8]  01 00 00 00 00 00 00 00
  vcan1  18EBFF00   [8]  02 00 FF FF FF FF FF FF

This patch adds check for the lower bound and abort illegal TP.

[1] SAE-J1939-82 A.3.4 Row 2 and A.3.6 Row 6.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1634203601-3460-1-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong 
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde

can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with error length

2021-10-17T12:12:56+00:00

According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so
cancel session when receive unexpected TP.DT message.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1632972800-45091-1-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong 
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde

can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv

2021-10-17T12:12:56+00:00

It will trigger UAF for rx_kref of j1939_priv as following.

        cpu0                                    cpu1
j1939_sk_bind(socket0, ndev0, ...)
j1939_netdev_start
                                        j1939_sk_bind(socket1, ndev0, ...)
                                        j1939_netdev_start
j1939_priv_set
                                        j1939_priv_get_by_ndev_locked
j1939_jsk_add
.....
j1939_netdev_stop
kref_put_lock(&priv->rx_kref, ...)
                                        kref_get(&priv->rx_kref, ...)
                                        REFCOUNT_WARN("addition on 0;...")

====================================================
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0
RIP: 0010:refcount_warn_saturate+0x169/0x1e0
Call Trace:
 j1939_netdev_start+0x68b/0x920
 j1939_sk_bind+0x426/0xeb0
 ? security_socket_bind+0x83/0xb0

The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to
protect.

Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/20210926104757.2021540-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Reported-by: syzbot+85d9878b19c94f9019ad@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan 
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde

can: j1939: j1939_tp_rxtimer(): fix errant alert in j1939_tp_rxtimer

2021-10-17T10:39:03+00:00

When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will
give an alert "rx timeout, send abort", but do nothing actually. Move
the alert into session active judgment condition, it is more
reasonable.

One of the scenarios is that j1939_tp_rxtimer() execute followed by
j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session
state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/20210906094219.95924-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Ziyang Xuan 
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde

net: Remove redundant if statements

2021-08-05T12:27:50+00:00

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.

Signed-off-by: Yajun Deng 
Signed-off-by: David S. Miller

can: j1939: extend UAPI to notify about RX status

2021-08-04T10:11:52+00:00

To be able to create applications with user friendly feedback, we need be
able to provide receive status information.

Typical ETP transfer may take seconds or even hours. To give user some
clue or show a progress bar, the stack should push status updates.
Same as for the TX information, the socket error queue will be used with
following new signals:
- J1939_EE_INFO_RX_RTS   - received and accepted request to send signal.
- J1939_EE_INFO_RX_DPO   - received data package offset signal
- J1939_EE_INFO_RX_ABORT - RX session was aborted

Instead of completion signal, user will get data package.
To activate this signals, application should set
SOF_TIMESTAMPING_RX_SOFTWARE to the SO_TIMESTAMPING socket option. This
will avoid unpredictable application behavior for the old software.

Link: https://lore.kernel.org/r/20210707094854.30781-3-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde

can: j1939: rename J1939_ERRQUEUE_* to J1939_ERRQUEUE_TX_*

2021-08-04T10:11:48+00:00

Prepare the world for the J1939_ERRQUEUE_RX_ version

Link: https://lore.kernel.org/r/20210707094854.30781-2-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde