As we may defragment the packet in IPv4 PRE_ROUTING and refragment
it after POST_ROUTING we should save the value of frag_max_size.

This is still very wrong as the bridge is supposed to leave the
packets intact, meaning that the right thing to do is to use the
original frag_list for fragmentation.

Unfortunately we don't currently guarantee that the frag_list is
left untouched throughout netfilter so until this changes this is
the best we can do.

There is also a spot in FORWARD where it appears that we can
forward a packet without going through fragmentation, mark it
so that we can fix it later.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains another batch with Netfilter/IPVS updates
for net-next, they are:

1) Add abstracted ICMP codes to the nf_tables reject expression. We
   introduce four reasons to reject using ICMP that overlap in IPv4
   and IPv6 from the semantic point of view. This should simplify the
   maintainance of dual stack rule-sets through the inet table.

2) Move nf_send_reset() functions from header files to per-family
   nf_reject modules, suggested by Patrick McHardy.

3) We have to use IS_ENABLED(CONFIG_BRIDGE_NETFILTER) everywhere in the
   code now that br_netfilter can be modularized. Convert remaining spots
   in the network stack code.

4) Use rcu_barrier() in the nf_tables module removal path to ensure that
   we don't leave object that are still pending to be released via
   call_rcu (that may likely result in a crash).

5) Remove incomplete arch 32/64 compat from nft_compat. The original (bad)
   idea was to probe the word size based on the xtables match/target info
   size, but this assumption is wrong when you have to dump the information
   back to userspace.

6) Allow to filter from prerouting and postrouting in the nf_tables bridge.
   In order to emulate the ebtables NAT chains (which are actually simple
   filter chains with no special semantics), we have support filtering from
   this hooks too.

7) Add explicit module dependency between xt_physdev and br_netfilter.
   This provides a way to detect if the user needs br_netfilter from
   the configuration path. This should reduce the breakage of the
   br_netfilter modularization.

8) Cleanup coding style in ip_vs.h, from Simon Horman.

9) Fix crash in the recently added nf_tables masq expression. We have
   to register/unregister the notifiers to clean up the conntrack table
   entries from the module init/exit path, not from the rule addition /
   deletion path. From Arturo Borrero.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when vlan filtering is turned on on the bridge, the bridge
will drop all traffic untill the user configures the filter.  This
isn't very nice for ports that don't care about vlans and just
want untagged traffic.

A concept of a default_pvid was recently introduced.  This patch
adds filtering support for default_pvid.   Now, ports that don't
care about vlans and don't define there own filter will belong
to the VLAN of the default_pvid and continue to receive untagged
traffic.

This filtering can be disabled by setting default_pvid to 0.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, if the pvid is not set, we return an illegal vlan value
even though the pvid value is set to 0.  Since pvid of 0 is currently
invalid, just return 0 instead.  This makes the current and future
checks simpler.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows the user to set and retrieve default_pvid
value.  A new value can only be stored when vlan filtering
is disabled.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

You can use physdev to match the physical interface enslaved to the
bridge device. This information is stored in skb->nf_bridge and it is
set up by br_netfilter. So, this is only available when iptables is
used from the bridge netfilter path.

Since 34666d4 ("netfilter: bridge: move br_netfilter out of the core"),
the br_netfilter code is modular. To reduce the impact of this change,
we can autoload the br_netfilter if the physdev match is used since
we assume that the users need br_netfilter in place.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This allows us to emulate the NAT table in ebtables, which is actually
a plain filter chain that hooks at prerouting, output and postrouting.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch introduces the NFT_REJECT_ICMPX_UNREACH type which provides
an abstraction to the ICMP and ICMPv6 codes that you can use from the
inet and bridge tables, they are:

* NFT_REJECT_ICMPX_NO_ROUTE: no route to host - network unreachable
* NFT_REJECT_ICMPX_PORT_UNREACH: port unreachable
* NFT_REJECT_ICMPX_HOST_UNREACH: host unreachable
* NFT_REJECT_ICMPX_ADMIN_PROHIBITED: administratevely prohibited

You can still use the specific codes when restricting the rule to match
the corresponding layer 3 protocol.

I decided to not overload the existing NFT_REJECT_ICMP_UNREACH to have
different semantics depending on the table family and to allow the user
to specify ICMP family specific codes if they restrict it to the
corresponding family.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In preparation for being able to propagate port states to e.g: notifiers
or other kernel parts, do not manipulate the port state directly, but
instead use a helper function which will allow us to do a bit more than
just setting the state.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>