linux.git/net/bridge/br_input.c, branch v5.12

net: bridge: fix misspellings using codespell tool

2021-01-09T21:54:47+00:00

Some typos are found out by codespell tool:

$ codespell ./net/bridge/
./net/bridge/br_stp.c:604: permanant  ==> permanent
./net/bridge/br_stp.c:605: persistance  ==> persistence
./net/bridge/br.c:125: underlaying  ==> underlying
./net/bridge/br_input.c:43: modue  ==> mode
./net/bridge/br_mrp.c:828: Determin  ==> Determine
./net/bridge/br_mrp.c:848: Determin  ==> Determine
./net/bridge/br_mrp.c:897: Determin  ==> Determine

Fix typos found by codespell.

Signed-off-by: Menglong Dong 
Acked-by: Randy Dunlap 
Link: https://lore.kernel.org/r/20210108025332.52480-1-dong.menglong@zte.com.cn
Signed-off-by: Jakub Kicinski

net: bridge: switch to net core statistics counters handling

2020-11-21T22:40:50+00:00

Use netdev->tstats instead of a member of net_bridge for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.

Signed-off-by: Heiner Kallweit 
Link: https://lore.kernel.org/r/9bad2be2-fd84-7c6e-912f-cee433787018@gmail.com
Signed-off-by: Jakub Kicinski

net: bridge: mcast: add support for raw L2 multicast groups

2020-10-31T00:49:19+00:00

Extend the bridge multicast control and data path to configure routes
for L2 (non-IP) multicast groups.

The uapi struct br_mdb_entry union u is extended with another variant,
mac_addr, which does not change the structure size, and which is valid
when the proto field is zero.

To be compatible with the forwarding code that is already in place,
which acts as an IGMP/MLD snooping bridge with querier capabilities, we
need to declare that for L2 MDB entries (for which there exists no such
thing as IGMP/MLD snooping/querying), that there is always a querier.
Otherwise, these entries would be flooded to all bridge ports and not
just to those that are members of the L2 multicast group.

Needless to say, only permanent L2 multicast groups can be installed on
a bridge port.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: Vladimir Oltean 
Link: https://lore.kernel.org/r/20201028233831.610076-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski

net: bridge: extend the process of special frames

2020-10-30T01:39:43+00:00

This patch extends the processing of frames in the bridge. Currently MRP
frames needs special processing and the current implementation doesn't
allow a nice way to process different frame types. Therefore try to
improve this by adding a list that contains frame types that need
special processing. This list is iterated for each input frame and if
there is a match based on frame type then these functions will be called
and decide what to do with the frame. It can process the frame then the
bridge doesn't need to do anything or don't process so then the bridge
will do normal forwarding.

Signed-off-by: Henrik Bjoernlund  
Reviewed-by: Horatiu Vultur  
Acked-by: Nikolay Aleksandrov 
Signed-off-by: Jakub Kicinski

net: bridge: allow enslaving some DSA master network devices

2020-05-11T02:52:33+00:00

Commit 8db0a2ee2c63 ("net: bridge: reject DSA-enabled master netdevices
as bridge members") added a special check in br_if.c in order to check
for a DSA master network device with a tagging protocol configured. This
was done because back then, such devices, once enslaved in a bridge
would become inoperative and would not pass DSA tagged traffic anymore
due to br_handle_frame returning RX_HANDLER_CONSUMED.

But right now we have valid use cases which do require bridging of DSA
masters. One such example is when the DSA master ports are DSA switch
ports themselves (in a disjoint tree setup). This should be completely
equivalent, functionally speaking, from having multiple DSA switches
hanging off of the ports of a switchdev driver. So we should allow the
enslaving of DSA tagged master network devices.

Instead of the regular br_handle_frame(), install a new function
br_handle_frame_dummy() on these DSA masters, which returns
RX_HANDLER_PASS in order to call into the DSA specific tagging protocol
handlers, and lift the restriction from br_add_if.

Suggested-by: Nikolay Aleksandrov 
Suggested-by: Florian Fainelli 
Signed-off-by: Vladimir Oltean 
Acked-by: Nikolay Aleksandrov 
Reviewed-by: Florian Fainelli 
Tested-by: Florian Fainelli 
Signed-off-by: Jakub Kicinski

bridge: mrp: Integrate MRP into the bridge

2020-04-27T18:40:25+00:00

To integrate MRP into the bridge, the bridge needs to do the following:
- detect if the MRP frame was received on MRP ring port in that case it would be
  processed otherwise just forward it as usual.
- enable parsing of MRP
- before whenever the bridge was set up, it would set all the ports in
  forwarding state. Add an extra check to not set ports in forwarding state if
  the port is an MRP ring port. The reason of this change is that if the MRP
  instance initially sets the port in blocked state by setting the bridge up it
  would overwrite this setting.

Reviewed-by: Nikolay Aleksandrov 
Signed-off-by: Horatiu Vultur 
Signed-off-by: David S. Miller

net: bridge: vlan: add per-vlan state

2020-01-24T11:58:14+00:00

The first per-vlan option added is state, it is needed for EVPN and for
per-vlan STP. The state allows to control the forwarding on per-vlan
basis. The vlan state is considered only if the port state is forwarding
in order to avoid conflicts and be consistent. br_allowed_egress is
called only when the state is forwarding, but the ingress case is a bit
more complicated due to the fact that we may have the transition between
port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still
allow the bridge to learn from the packet after vlan filtering and it will
be dropped after that. Also to optimize the pvid state check we keep a
copy in the vlan group to avoid one lookup. The state members are
modified with *_ONCE() to annotate the lockless access.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: fdb: eliminate extra port state tests from fast-path

2019-11-04T19:15:27+00:00

When commit df1c0b8468b3 ("[BRIDGE]: Packets leaking out of
disabled/blocked ports.") introduced the port state tests in
br_fdb_update() it was to avoid learning/refreshing from STP BPDUs, it was
also used to avoid learning/refreshing from user-space with NTF_USE. Those
two tests are done for every packet entering the bridge if it's learning,
but for the fast-path we already have them checked in br_handle_frame() and
is unnecessary to do it again. Thus push the checks to the unlikely cases
and drop them from br_fdb_update(), the new nbp_state_should_learn() helper
is used to determine if the port state allows br_fdb_update() to be called.
The two places which need to do it manually are:
 - user-space add call with NTF_USE set
 - link-local packet learning done in __br_handle_local_finish()

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: fdb: br_fdb_update can take flags directly

2019-11-01T17:32:43+00:00

If we modify br_fdb_update() to take flags directly we can get rid of
one test and one atomic bitop in the learning path.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: fdb: convert is_local to bitops

2019-10-30T01:12:49+00:00

The patch adds a new fdb flags field in the hole between the two cache
lines and uses it to convert is_local to bitops.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller