linux.git/net/bridge/br_device.c, branch v5.8

net: change addr_list_lock back to static key

2020-06-09T19:59:45+00:00

The dynamic key update for addr_list_lock still causes troubles,
for example the following race condition still exists:

CPU 0:				CPU 1:
(RCU read lock)			(RTNL lock)
dev_mc_seq_show()		netdev_update_lockdep_key()
				  -> lockdep_unregister_key()
 -> netif_addr_lock_bh()

because lockdep doesn't provide an API to update it atomically.
Therefore, we have to move it back to static keys and use subclass
for nest locking like before.

In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key
changes"), I already reverted most parts of commit ab92d68fc22f
("net: core: add generic lockdep keys").

This patch reverts the rest and also part of commit f3b0a18bb6cb
("net: remove unnecessary variables and callback"). After this
patch, addr_list_lock changes back to using static keys and
subclasses to satisfy lockdep. Thanks to dev->lower_level, we do
not have to change back to ->ndo_get_lock_subclass().

And hopefully this reduces some syzbot lockdep noises too.

Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com
Cc: Taehee Yoo 
Cc: Dmitry Vyukov 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

bridge: mrp: Integrate MRP into the bridge

2020-04-27T18:40:25+00:00

To integrate MRP into the bridge, the bridge needs to do the following:
- detect if the MRP frame was received on MRP ring port in that case it would be
  processed otherwise just forward it as usual.
- enable parsing of MRP
- before whenever the bridge was set up, it would set all the ports in
  forwarding state. Add an extra check to not set ports in forwarding state if
  the port is an MRP ring port. The reason of this change is that if the MRP
  instance initially sets the port in blocked state by setting the bridge up it
  would overwrite this setting.

Reviewed-by: Nikolay Aleksandrov 
Signed-off-by: Horatiu Vultur 
Signed-off-by: David S. Miller

net: bridge: fix stale eth hdr pointer in br_dev_xmit

2020-02-24T19:11:19+00:00

In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but
if the packet has the vlan header inside (e.g. bridge with disabled
tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag()
to extract the vid before filtering which in turn calls pskb_may_pull()
and we may end up with a stale eth pointer. Moreover the cached eth header
pointer will generally be wrong after that operation. Remove the eth header
caching and just use eth_hdr() directly, the compiler does the right thing
and calculates it only once so we don't lose anything.

Fixes: 057658cb33fb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: add per-vlan state

2020-01-24T11:58:14+00:00

The first per-vlan option added is state, it is needed for EVPN and for
per-vlan STP. The state allows to control the forwarding on per-vlan
basis. The vlan state is considered only if the port state is forwarding
in order to avoid conflicts and be consistent. br_allowed_egress is
called only when the state is forwarding, but the ingress case is a bit
more complicated due to the fact that we may have the transition between
port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still
allow the bridge to learn from the packet after vlan filtering and it will
be dropped after that. Also to optimize the pvid state check we keep a
copy in the vlan group to avoid one lookup. The state members are
modified with *_ONCE() to annotate the lockless access.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: deny dev_set_mac_address() when unregistering

2019-12-03T19:21:20+00:00

We have an interesting memory leak in the bridge when it is being
unregistered and is a slave to a master device which would change the
mac of its slaves on unregister (e.g. bond, team). This is a very
unusual setup but we do end up leaking 1 fdb entry because
dev_set_mac_address() would cause the bridge to insert the new mac address
into its table after all fdbs are flushed, i.e. after dellink() on the
bridge has finished and we call NETDEV_UNREGISTER the bond/team would
release it and will call dev_set_mac_address() to restore its original
address and that in turn will add an fdb in the bridge.
One fix is to check for the bridge dev's reg_state in its
ndo_set_mac_address callback and return an error if the bridge is not in
NETREG_REGISTERED.

Easy steps to reproduce:
 1. add bond in mode != A/B
 2. add any slave to the bond
 3. add bridge dev as a slave to the bond
 4. destroy the bridge device

Trace:
 unreferenced object 0xffff888035c4d080 (size 128):
   comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s)
   hex dump (first 32 bytes):
     41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00  A..6............
     d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00  ...^?...........
   backtrace:
     [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f
     [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge]
     [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge]
     [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge]
     [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge]
     [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge]
     [<000000006846a77f>] dev_set_mac_address+0x63/0x9b
     [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding]
     [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding]
     [<00000000305d7795>] notifier_call_chain+0x38/0x56
     [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23
     [<000000008279477b>] rollback_registered_many+0x353/0x6a4
     [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f
     [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43
     [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a
     [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268

Fixes: 43598813386f ("bridge: add local MAC address to forwarding table (v2)")
Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

bridge: implement get_link_ksettings ethtool method

2019-11-13T03:52:15+00:00

We return the maximum speed of all active ports. This matches how the link
speed would give an upper limit for traffic to/from any single peer if the
bridge were replaced with a hardware switch.

Signed-off-by: Matthias Schiffer 
Signed-off-by: David S. Miller

net: core: add generic lockdep keys

2019-10-24T21:53:48+00:00

Some interface types could be nested.
(VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..)
These interface types should set lockdep class because, without lockdep
class key, lockdep always warn about unexisting circular locking.

In the current code, these interfaces have their own lockdep class keys and
these manage itself. So that there are so many duplicate code around the
/driver/net and /net/.
This patch adds new generic lockdep keys and some helper functions for it.

This patch does below changes.
a) Add lockdep class keys in struct net_device
   - qdisc_running, xmit, addr_list, qdisc_busylock
   - these keys are used as dynamic lockdep key.
b) When net_device is being allocated, lockdep keys are registered.
   - alloc_netdev_mqs()
c) When net_device is being free'd llockdep keys are unregistered.
   - free_netdev()
d) Add generic lockdep key helper function
   - netdev_register_lockdep_key()
   - netdev_unregister_lockdep_key()
   - netdev_update_lockdep_key()
e) Remove unnecessary generic lockdep macro and functions
f) Remove unnecessary lockdep code of each interfaces.

After this patch, each interface modules don't need to maintain
their lockdep keys.

Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T18:00:14+00:00

Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.

Signed-off-by: David S. Miller

netfilter: bridge: add connection tracking system

2019-05-30T21:18:18+00:00

This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.

This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.

The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).

The packet defragmentation is done through the ip_defrag() call.  This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.

The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.

This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.

Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.

The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.

Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.

Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman