This fixes possible deadlocks like the following caused by
hci_cmd_sync_dequeue causing the destroy function to run:

 INFO: task kworker/u19:0:143 blocked for more than 120 seconds.
       Tainted: G        W  O        6.8.0-2024-03-19-intel-next-iLS-24ww14 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:kworker/u19:0   state:D stack:0     pid:143   tgid:143   ppid:2      flags:0x00004000
 Workqueue: hci0 hci_cmd_sync_work [bluetooth]
 Call Trace:
  <TASK>
  __schedule+0x374/0xaf0
  schedule+0x3c/0xf0
  schedule_preempt_disabled+0x1c/0x30
  __mutex_lock.constprop.0+0x3ef/0x7a0
  __mutex_lock_slowpath+0x13/0x20
  mutex_lock+0x3c/0x50
  mgmt_set_connectable_complete+0xa4/0x150 [bluetooth]
  ? kfree+0x211/0x2a0
  hci_cmd_sync_dequeue+0xae/0x130 [bluetooth]
  ? __pfx_cmd_complete_rsp+0x10/0x10 [bluetooth]
  cmd_complete_rsp+0x26/0x80 [bluetooth]
  mgmt_pending_foreach+0x4d/0x70 [bluetooth]
  __mgmt_power_off+0x8d/0x180 [bluetooth]
  ? _raw_spin_unlock_irq+0x23/0x40
  hci_dev_close_sync+0x445/0x5b0 [bluetooth]
  hci_set_powered_sync+0x149/0x250 [bluetooth]
  set_powered_sync+0x24/0x60 [bluetooth]
  hci_cmd_sync_work+0x90/0x150 [bluetooth]
  process_one_work+0x13e/0x300
  worker_thread+0x2f7/0x420
  ? __pfx_worker_thread+0x10/0x10
  kthread+0x107/0x140
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x3d/0x60
  ? __pfx_kthread+0x10/0x10
  ret_from_fork_asm+0x1b/0x30
  </TASK>

Tested-by: Kiran K <kiran.k@intel.com>
Fixes: f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the following crash:

==================================================================
BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54

CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:93 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0x169/0x550 mm/kasan/report.c:488
q kasan_report+0x143/0x180 mm/kasan/report.c:601
 set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:328
 process_one_work kernel/workqueue.c:3231 [inline]
 process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
 worker_thread+0x86d/0xd10 kernel/workqueue.c:3389
 kthread+0x2f0/0x390 kernel/kthread.c:389
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 </TASK>

Allocated by task 5247:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
 poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
 __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
 kasan_kmalloc include/linux/kasan.h:211 [inline]
 __kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4193
 kmalloc_noprof include/linux/slab.h:681 [inline]
 kzalloc_noprof include/linux/slab.h:807 [inline]
 mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269
 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296
 set_powered+0x3cd/0x5e0 net/bluetooth/mgmt.c:1394
 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712
 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x221/0x270 net/socket.c:745
 sock_write_iter+0x2dd/0x400 net/socket.c:1160
 new_sync_write fs/read_write.c:497 [inline]
 vfs_write+0xa72/0xc90 fs/read_write.c:590
 ksys_write+0x1a0/0x2c0 fs/read_write.c:643
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Freed by task 5246:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
 kasan_slab_free include/linux/kasan.h:184 [inline]
 slab_free_hook mm/slub.c:2256 [inline]
 slab_free mm/slub.c:4477 [inline]
 kfree+0x149/0x360 mm/slub.c:4598
 settings_rsp+0x2bc/0x390 net/bluetooth/mgmt.c:1443
 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259
 __mgmt_power_off+0x112/0x420 net/bluetooth/mgmt.c:9455
 hci_dev_close_sync+0x665/0x11a0 net/bluetooth/hci_sync.c:5191
 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline]
 hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508
 sock_do_ioctl+0x158/0x460 net/socket.c:1222
 sock_ioctl+0x629/0x8e0 net/socket.c:1341
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:907 [inline]
 __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83gv
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Reported-by: syzbot+03d6270b6425df1605bf@syzkaller.appspotmail.com
Tested-by: syzbot+03d6270b6425df1605bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=03d6270b6425df1605bf
Fixes: 275f3f648702 ("Bluetooth: Fix not checking MGMT cmd pending queue")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds the initial implementation of MGMT_OP_HCI_CMD_SYNC as
documented in mgmt-api (BlueZ tree):

Send HCI command and wait for event Command
===========================================

	Command Code:		0x005B
	Controller Index:	<controller id>
	Command Parameters:	Opcode (2 Octets)
				Event (1 Octet)
				Timeout (1 Octet)
				Parameter Length (2 Octets)
				Parameter (variable)
	Return Parameters:	Response (1-variable Octets)

	This command may be used to send a HCI command and wait for an
	(optional) event.

	The HCI command is specified by the Opcode, any arbitrary is supported
	including vendor commands, but contrary to the like of
	Raw/User channel it is run as an HCI command send by the kernel
	since it uses its command synchronization thus it is possible to wait
	for a specific event as a response.

	Setting event to 0x00 will cause the command to wait for either
	HCI Command Status or HCI Command Complete.

	Timeout is specified in seconds, setting it to 0 will cause the
	default timeout to be used.

	Possible errors:	Failed
				Invalid Parameters

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pull networking fixes from Paolo Abeni:
 "Including fixes from ieee802154, bluetooth and netfilter.

  Current release - regressions:

   - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc

   - eth: am65-cpsw: fix forever loop in cleanup code

  Current release - new code bugs:

   - eth: mlx5: HWS, fixed double-free in error flow of creating SQ

  Previous releases - regressions:

   - core: avoid potential underflow in qdisc_pkt_len_init() with UFO

   - core: test for not too small csum_start in virtio_net_hdr_to_skb()

   - vrf: revert "vrf: remove unnecessary RCU-bh critical section"

   - bluetooth:
       - fix uaf in l2cap_connect
       - fix possible crash on mgmt_index_removed

   - dsa: improve shutdown sequence

   - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq

   - eth: ip_gre: fix drops of small packets in ipgre_xmit

  Previous releases - always broken:

   - core: fix gso_features_check to check for both
     dev->gso_{ipv4_,}max_size

   - core: fix tcp fraglist segmentation after pull from frag_list

   - netfilter: nf_tables: prevent nf_skb_duplicated corruption

   - sctp: set sk_state back to CLOSED if autobind fails in
     sctp_listen_start

   - mac802154: fix potential RCU dereference issue in
     mac802154_scan_worker

   - eth: fec: restart PPS after link state change"

* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
  sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
  dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
  doc: net: napi: Update documentation for napi_schedule_irqoff
  net/ncsi: Disable the ncsi work before freeing the associated structure
  net: phy: qt2025: Fix warning: unused import DeviceId
  gso: fix udp gso fraglist segmentation after pull from frag_list
  bridge: mcast: Fail MDB get request on empty entry
  vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
  net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
  net: phy: realtek: Check the index value in led_hw_control_get
  ppp: do not assume bh is held in ppp_channel_bridge_input()
  selftests: rds: move include.sh to TEST_FILES
  net: test for not too small csum_start in virtio_net_hdr_to_skb()
  net: gso: fix tcp fraglist segmentation after pull from frag_list
  ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
  net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
  net: add more sanity checks to qdisc_pkt_len_init()
  net: avoid potential underflow in qdisc_pkt_len_init() with UFO
  net: ethernet: ti: cpsw_ale: Fix warning on some platforms
  net: microchip: Make FDMA config symbol invisible
  ...

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

If mgmt_index_removed is called while there are commands queued on
cmd_sync it could lead to crashes like the bellow trace:

0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc
0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth]
0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth]
0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth]

So while handling mgmt_index_removed this attempts to dequeue
commands passed as user_data to cmd_sync.

Fixes: 7cf5c2978f23 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Reported-by: jiaymao <quic_jiaymao@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.

Fixes: b644ba336997 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Due to 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 there could be keys stored
with the wrong address type so this attempt to detect it and ignore them
instead of just failing to load all keys.

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which
breaks compatibility with commands like:

bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74  {0x0001} [hci0]
        Keys: 2
        BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
        Key type: Authenticated key from P-256 (0x03)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 6ed96089bd9765be2f2c971b0b95f624
        LE Address: D7:2A:DE:1E:73:A2 (Static)
        Key type: Unauthenticated key from P-256 (0x02)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3                {0x0001} [hci0]
      Load Long Term Keys (0x0013)
        Status: Invalid Parameters (0x0d)

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

MGMT_OP_DISCONNECT can be called while mgmt_device_connected has not
been called yet, which will cause the connection procedure to be
aborted, so mgmt_device_disconnected shall still respond with command
complete to MGMT_OP_DISCONNECT and just not emit
MGMT_EV_DEVICE_DISCONNECTED since MGMT_EV_DEVICE_CONNECTED was never
sent.

To fix this MGMT_OP_DISCONNECT is changed to work similarly to other
command which do use hci_cmd_sync_queue and then use hci_conn_abort to
disconnect and returns the result, in order for hci_conn_abort to be
used from hci_cmd_sync context it now uses hci_cmd_sync_run_once.

Link: https://github.com/bluez/bluez/issues/932
Fixes: 12d4a3b2ccb3 ("Bluetooth: Move check for MGMT_CONNECTED flag into mgmt.c")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>