During system suspend, advertisement monitoring is disabled by setting
the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This
disables the monitoring during suspend, however, if the controller is
monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to
indicate that the monitoring has been stopped for that particular
device. This event may occur after suspend depending on the
low_threshold_timeout and peer device advertisement frequency, which
causes early wake up.

Right way to disable the monitoring for suspend is by removing all the
monitors before suspend and re-monitor after resume to ensure no events
are received during suspend. This patch fixes this suspend/resume issue.

Following tests are performed:
- Add monitors before suspend and make sure DeviceFound gets triggered
- Suspend the system and verify that all monitors are removed by kernel
  but not Released by bluetoothd
- Wake up and verify that all monitors are added again and DeviceFound
  gets triggered

Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Archie Pusaka <apusaka@google.com>
Reviewed-by: Miao-chen Chou <mcchou@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This moves functions manipulating EIR/Adv Data to its own file so it
can be reused by other files.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

For HFP offload use case, codec needs to be configured
before opening SCO connection. This patch sends
HCI_CONFIGURE_DATA_PATH command to configure doec before
opening SCO connection.

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Code was checking if random_addr and hdev->rpa match without first
checking if the RPA has not been set (BDADDR_ANY), furthermore it was
clearing HCI_RPA_EXPIRED before the command completes and the RPA is
actually programmed which in case of failure would leave the expired
RPA still set.

Since advertising instance have a similar problem the clearing of
HCI_RPA_EXPIRED has been moved to hci_event.c after checking the random
address is in fact the hdev->rap and then proceed to set the expire
timeout.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

These command do have variable length and the length can go up to 251,
so this changes the struct to not use a fixed size and then when
creating the PDU only the actual length of the data send to the
controller.

Fixes: a0fb3726ba551 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
blacklist -> reject list
whitelist -> accept list

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
master -> central
slave  -> peripheral

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Disable duplicates filter when scanning for advertisement monitor for
the following reasons. The scanning includes active scan and passive
scan.

For HW pattern filtering (ex. MSFT), Realtek and Qualcomm controllers
ignore RSSI_Sampling_Period when the duplicates filter is enabled.

For SW pattern filtering, when we're not doing interleaved scanning, it
is necessary to disable duplicates filter, otherwise hosts can only
receive one advertisement and it's impossible to know if a peer is still
in range.

Signed-off-by: Yun-Hao Chung <howardchung@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...

There is a possible race condition vulnerability between issuing a HCI
command and removing the cont.  Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:

thread-A in hci_req_sync()      |   thread-B in hci_dev_do_close()
                                |   hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
...                             |   test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev);        |
                                |
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>