linux.git/mm, branch v3.11-rc7

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-08-25T19:25:38+00:00

Pull vfs fixes from Al Viro:
 "Assorted fixes from the last week or so"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: collect_mounts() should return an ERR_PTR
  bfs: iget_locked() doesn't return an ERR_PTR
  efs: iget_locked() doesn't return an ERR_PTR()
  proc: kill the extra proc_readfd_common()->dir_emit_dots()
  cope with potentially long ->d_dname() output for shmem/hugetlb

cope with potentially long ->d_dname() output for shmem/hugetlb

2013-08-24T16:10:17+00:00

dynamic_dname() is both too much and too little for those - the
output may be well in excess of 64 bytes dynamic_dname() assumes
to be enough (thanks to ashmem feeding really long names to
shmem_file_setup()) and vsnprintf() is an overkill for those
guys.

Signed-off-by: Al Viro

memcg: get rid of swapaccount leftovers

2013-08-23T16:51:22+00:00

The swapaccount kernel parameter without any values has been removed by
commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but
it seems that we didn't get rid of all the left overs.

Make sure that menuconfig help text and kernel-parameters.txt are clear
about value for the paramter and remove the stalled comment which is not
very much useful on its own.

Signed-off-by: Michal Hocko 
Reported-by: Gergely Risko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Fix TLB gather virtual address range invalidation corner cases

2013-08-16T15:52:46+00:00

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc67f97 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c3580b7 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin 
Build-testing-by: Stephen Rothwell 
Build-testing-by: Richard Weinberger 
Reviewed-by: Michal Hocko 
Acked-by: Peter Zijlstra 
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds

mm: save soft-dirty bits on file pages

2013-08-14T00:57:48+00:00

Andy reported that if file page get reclaimed we lose the soft-dirty bit
if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get
encoded into pte entry.  Thus when #pf happens on such non-present pte
we can restore it back.

Reported-by: Andy Lutomirski 
Signed-off-by: Cyrill Gorcunov 
Acked-by: Pavel Emelyanov 
Cc: Matt Mackall 
Cc: Xiao Guangrong 
Cc: Marcelo Tosatti 
Cc: KOSAKI Motohiro 
Cc: Stephen Rothwell 
Cc: Peter Zijlstra 
Cc: "Aneesh Kumar K.V" 
Cc: Minchan Kim 
Cc: Wanpeng Li 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: save soft-dirty bits on swapped pages

2013-08-14T00:57:47+00:00

Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set
get swapped out, the bit is getting lost and no longer available when
pte read back.

To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in
pte entry for the page being swapped out.  When such page is to be read
back from a swap cache we check for bit presence and if it's there we
clear it and restore the former _PAGE_SOFT_DIRTY bit back.

One of the problem was to find a place in pte entry where we can save
the _PTE_SWP_SOFT_DIRTY bit while page is in swap.  The _PAGE_PSE was
chosen for that, it doesn't intersect with swap entry format stored in
pte.

Reported-by: Andy Lutomirski 
Signed-off-by: Cyrill Gorcunov 
Acked-by: Pavel Emelyanov 
Cc: Matt Mackall 
Cc: Xiao Guangrong 
Cc: Marcelo Tosatti 
Cc: KOSAKI Motohiro 
Cc: Stephen Rothwell 
Cc: Peter Zijlstra 
Cc: "Aneesh Kumar K.V" 
Reviewed-by: Minchan Kim 
Reviewed-by: Wanpeng Li 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

memcg: don't initialize kmem-cache destroying work for root caches

2013-08-14T00:57:47+00:00

struct memcg_cache_params has a union.  Different parts of this union
are used for root and non-root caches.  A part with destroying work is
used only for non-root caches.

I fixed the same problem in another place v3.9-rc1-16204-gf101a94, but
didn't notice this one.

This patch fixes the kernel panic:

[   46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8
[   46.849026] IP: [] kmem_cache_destroy_memcg_children+0x6c/0xc0
[   46.849092] PGD 0
[   46.849092] Oops: 0000 [#1] SMP
...

Signed-off-by: Andrey Vagin 
Cc: Glauber Costa 
Cc: Johannes Weiner 
Acked-by: Michal Hocko 
Cc: Balbir Singh 
Cc: KAMEZAWA Hiroyuki 
Cc: Konstantin Khlebnikov 
Cc:     [3.9.x]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Revert "slub: do not put a slab to cpu partial list when cpu_partial is 0"

2013-08-08T16:06:37+00:00

This reverts commit 318df36e57c0ca9f2146660d41ff28e8650af423.

This commit caused Steven Rostedt's hackbench runs to run out of memory
due to a leak.  As noted by Joonsoo Kim, it is buggy in the following
scenario:

 "I guess, you may set 0 to all kmem caches's cpu_partial via sysfs,
  doesn't it?

  In this case, memory leak is possible in following case.  Code flow of
  possible leak is follwing case.

   * in __slab_free()
   1. (!new.inuse || !prior) && !was_frozen
   2. !kmem_cache_debug && !prior
   3. new.frozen = 1
   4. after cmpxchg_double_slab, run the (!n) case with new.frozen=1
   5. with this patch, put_cpu_partial() doesn't do anything,
      because this cache's cpu_partial is 0
   6. return

  In step 5, leak occur"

And Steven does indeed have cpu_partial set to 0 due to RT testing.

Joonsoo is cooking up a patch, but everybody agrees that reverting this
for now is the right thing to do.

Reported-and-bisected-by: Steven Rostedt 
Acked-by: Joonsoo Kim 
Acked-by: Pekka Enberg 
Signed-off-by: Linus Torvalds

tmpfs: fix SEEK_DATA/SEEK_HOLE regression

2013-08-04T18:40:17+00:00

Commit 46a1c2c7ae53 ("vfs: export lseek_execute() to modules") broke the
tmpfs SEEK_DATA/SEEK_HOLE implementation, because vfs_setpos() converts
the carefully prepared -ENXIO to -EINVAL.  Other filesystems avoid it in
error cases: do the same in tmpfs.

Signed-off-by: Hugh Dickins 
Cc: Jie Liu 
Cc: Al Viro 
Signed-off-by: Linus Torvalds

vmpressure: make sure there are no events queued after memcg is offlined

2013-07-31T21:41:04+00:00

vmpressure is called synchronously from reclaim where the target_memcg
is guaranteed to be alive but the eventfd is signaled from the work
queue context.  This means that memcg (along with vmpressure structure
which is embedded into it) might go away while the work item is pending
which would result in use-after-release bug.

We have two possible ways how to fix this.  Either vmpressure pins memcg
before it schedules vmpr->work and unpin it in vmpressure_work_fn or
explicitely flush the work item from the css_offline context (as
suggested by Tejun).

This patch implements the later one and it introduces vmpressure_cleanup
which flushes the vmpressure work queue item item.  It hooks into
mem_cgroup_css_offline after the memcg itself is cleaned up.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko 
Reported-by: Tejun Heo 
Cc: Anton Vorontsov 
Cc: Johannes Weiner 
Cc: KAMEZAWA Hiroyuki 
Cc: KOSAKI Motohiro 
Cc: Li Zefan 
Acked-by: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds