linux.git/mm/rmap.c, branch v2.6.24

[S390] Optimize storage key handling for anonymous pages

2007-11-20T10:13:46+00:00

page_mkclean used to call page_clear_dirty for every given page. This
is different to all other architectures, where the dirty bit in the
PTEs is only resetted, if page_mapping() returns a non-NULL pointer.
We can move the page_test_dirty/page_clear_dirty sequence into the
2nd if to avoid unnecessary iske/sske sequences, which are expensive.

This change also helps kvm for s390 as the host must transfer the
dirty bit into the guest status bits. By moving the page_clear_dirty
operation into the 2nd if, the vm will only call page_clear_dirty
for pages where it walks the mapping anyway. There it calls
ptep_clear_flush for writable ptes, so we can transfer the dirty bit
to the guest.

Signed-off-by: Christian Borntraeger 
Signed-off-by: Martin Schwidefsky

Migration: find correct vma in new_vma_page()

2007-11-15T02:45:38+00:00

We hit the BUG_ON() in mm/rmap.c:vma_address() when trying to migrate via
mbind(MPOL_MF_MOVE) a non-anon region that spans multiple vmas.  For
anon-regions, we just fail to migrate any pages beyond the 1st vma in the
range.

This occurs because do_mbind() collects a list of pages to migrate by
calling check_range().  check_range() walks the task's mm, spanning vmas as
necessary, to collect the migratable pages into a list.  Then, do_mbind()
calls migrate_pages() passing the list of pages, a function to allocate new
pages based on vma policy [new_vma_page()], and a pointer to the first vma
of the range.

For each page in the list, new_vma_page() calls page_address_in_vma()
passing the page and the vma [first in range] to obtain the address to get
for alloc_page_vma().  The page address is needed to get interleaving
policy correct.  If the pages in the list come from multiple vmas,
eventually, new_page_address() will pass that page to page_address_in_vma()
with the incorrect vma.  For !PageAnon pages, this will result in a bug
check in rmap.c:vma_address().  For anon pages, vma_address() will just
return EFAULT and fail the migration.

This patch modifies new_vma_page() to check the return value from
page_address_in_vma().  If the return value is EFAULT, new_vma_page()
searchs forward via vm_next for the vma that maps the page--i.e., that does
not return EFAULT.  This assumes that the pages in the list handed to
migrate_pages() is in address order.  This is currently case.  The patch
documents this assumption in a new comment block for new_vma_page().

If new_vma_page() cannot locate the vma mapping the page in a forward
search in the mm, it will pass a NULL vma to alloc_page_vma().  This will
result in the allocation using the task policy, if any, else system default
policy.  This situation is unlikely, but the patch documents this behavior
with a comment.

Note, this patch results in restarting from the first vma in a multi-vma
range each time new_vma_page() is called.  If this is not acceptable, we
can make the vma argument a pointer, both in new_vma_page() and it's caller
unmap_and_move() so that the value held by the loop in migrate_pages()
always passes down the last vma in which a page was found.  This will
require changes to all new_page_t functions passed to migrate_pages().  Is
this necessary?

For this patch to work, we can't bug check in vma_address() for pages
outside the argument vma.  This patch removes the BUG_ON().  All other
callers [besides new_vma_page()] already check the return status.

Tested on x86_64, 4 node NUMA platform.

Signed-off-by: Lee Schermerhorn 
Acked-by: Christoph Lameter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: document tree_lock->zone.lock lockorder

2007-10-17T15:42:46+00:00

zone->lock is quite an "inner" lock and mostly constrained to page alloc as
well, so like slab locks, it probably isn't something that is critically
important to document here.  However unlike slab locks, zone lock could be
used more widely in future, and page_alloc.c might possibly have more
business to do tricky things with pagecache than does slab.  So...  I don't
think it hurts to document it.

Signed-off-by: Nick Piggin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Slab API: remove useless ctor parameter and reorder parameters

2007-10-17T15:42:45+00:00

Slab constructors currently have a flags parameter that is never used.  And
the order of the arguments is opposite to other slab functions.  The object
pointer is placed before the kmem_cache pointer.

Convert

        ctor(void *object, struct kmem_cache *s, unsigned long flags)

to

        ctor(struct kmem_cache *s, void *object)

throughout the kernel

[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

flush icache before set_pte() on ia64: flush icache at set_pte

2007-10-16T16:42:59+00:00

Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte().  This is too late.  This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.

This patch flush icache of a page when
	new pte has exec bit.
	&& new pte has present bit
	&& new pte is user's page.
	&& (old *ptep is not present
            || new pte's pfn is not same to old *ptep's ptn)
	&& new pte's page has no Pg_arch_1 bit.
	   Pg_arch_1 is set when a page is cache consistent.

I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".

pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.

Signed-off-by: KAMEZAWA Hiroyuki 
Cc: "Luck, Tony" 
Cc: Christoph Lameter 
Cc: Hugh Dickins 
Cc: Nick Piggin 
Acked-by: David S. Miller 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: Remove slab destructors from kmem_cache_create().

2007-07-20T01:11:58+00:00

Slab destructors were no longer supported after Christoph's
c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt

mm: merge populate and nopage into fault (fixes nonlinear)

2007-07-19T17:04:41+00:00

Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.

->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping.  The hitch here
is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
 But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).

Having the populate handler install the pte itself is likewise a nasty thing
to be doing.

This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn.  Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.

The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.

After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache.  Seems like a fringe functionality anyway.

NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
users have hit mainline yet.

[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin 
Signed-off-by: Randy Dunlap 
Cc: Mark Fasheh 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: kill validate_anon_vma to avoid mapcount BUG

2007-06-28T18:34:53+00:00

validate_anon_vma gave a useful check on the integrity of the anon_vma list
when Andrea was developing obj rmap; but it was not enabled in SLES9
itself, nor in mainline, until Nick changed commented-out RMAP_DEBUG to
configurable CONFIG_DEBUG_VM in 2.6.17.  Now Petr Vandrovec reports that
its BUG_ON(mapcount > 100000) can easily crash a CONFIG_DEBUG_VM=y system.

That limit was just an arbitrary number to protect against an infinite
loop.  We could raise it to something enormous (depending on sizeof struct
vma and size of memory?); but I rather think validate_anon_vma has outlived
its usefulness, and is better just removed - which gives a magnificent
performance boost to anything like Petr's test program ;)

Of course, a very long anon_vma list is bad news for preemption latency,
and I believe there has been one recent report of such: let's not forget
that, but validate_anon_vma only makes it worse not better.

Signed-off-by: Hugh Dickins 
Cc: Petr Vandrovec 
Acked-by: Nick Piggin 
Cc: Andrea Arcangeli 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: more rmap checking

2007-05-17T12:23:06+00:00

Re-introduce rmap verification patches that Hugh removed when he removed
PG_map_lock. PG_map_lock actually isn't needed to synchronise access to
anonymous pages, because PG_locked and PTL together already do.

These checks were important in discovering and fixing a rare rmap corruption
in SLES9.

Signed-off-by: Nick Piggin 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Remove SLAB_CTOR_CONSTRUCTOR

2007-05-17T12:23:04+00:00

SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.

Signed-off-by: Christoph Lameter 
Cc: David Howells 
Cc: Jens Axboe 
Cc: Steven French 
Cc: Michael Halcrow 
Cc: OGAWA Hirofumi 
Cc: Miklos Szeredi 
Cc: Steven Whitehouse 
Cc: Roman Zippel 
Cc: David Woodhouse 
Cc: Dave Kleikamp 
Cc: Trond Myklebust 
Cc: "J. Bruce Fields" 
Cc: Anton Altaparmakov 
Cc: Mark Fasheh 
Cc: Paul Mackerras 
Cc: Christoph Hellwig 
Cc: Jan Kara 
Cc: David Chinner 
Cc: "David S. Miller" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds