Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ...
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
In old pcp design, pcp->free_factor gets incremented in nr_pcp_free()
which is invoked by free_pcppages_bulk(). So, it used to increase
free_factor by 1 only when we try to reduce the size of pcp list and
free_high used to trigger only for order > 0 and order < costly_order
and pcp->free_factor > 0.
For iperf3 I noticed that with older design in kernel v6.6, pcp list
was drained mostly when pcp->count > high (more often when count goes
above 530). and most of the time pcp->free_factor was 0, triggering
very few high order flushes.
But this is changed in the current design, introduced in commit
6ccdcb6d3a74 ("mm, pcp: reduce detecting time of consecutive high order
page freeing"), where pcp->free_factor is changed to pcp->free_count to
keep track of the number of pages freed contiguously. In this design,
pcp->free_count is incremented on every deallocation, irrespective of
whether pcp list was reduced or not. And logic to trigger free_high is
if pcp->free_count goes above batch (which is 63) and there are two
contiguous page free without any allocation.
With this design, for iperf3, pcp list is getting flushed more
frequently because free_high heuristics is triggered more often now. I
observed that high order pcp list is drained as soon as both count and
free_count goes above 63.
Due to this more aggressive high order flushing, applications doing
contiguous high order allocation will require to go to global list more
frequently.
On a 2-node AMD machine with 384 vCPUs on each node, connected via
Mellonox connectX-7, I am seeing a ~30% performance reduction if we
scale number of iperf3 client/server pairs from 32 to 64.
Though this new design reduced the time to detect high order flushes,
but for application which are allocating high order pages more
frequently it may be flushing the high order list pre-maturely. This
motivates towards tuning on how late or early we should flush high
order lists.
So, in this patch, we increased the pcp->free_count threshold to
trigger free_high from "batch" to "batch + pcp->high_min / 2" as
suggested by Ying [1], In the original pcp->free_factor solution,
free_high is triggered for contiguous freeing with size ranging from
"batch" to "pcp->high + batch". So, the average value is "batch +
pcp->high / 2". While in the pcp->free_count solution, free_high will
be triggered for contiguous freeing with size "batch". So, to restore
the original behavior, we can use the threshold "batch + pcp->high_min
/ 2"
This new threshold keeps high order pages in pcp list for a longer
duration which can help the application doing high order allocations
frequently.
With this patch performace to Iperf3 is restored and score for other
benchmarks on the same machine are as follows:
iperf3 lmbench3 netperf kbuild
(AF_UNIX) (SCTP_STREAM_MANY)
------- --------- ----------------- ------
v6.6 vanilla (base) 100 100 100 100
v6.12 vanilla 69 113 98.5 98.8
v6.12 + this patch 100 110.3 100.2 99.3
netperf-tcp:
6.12 6.12
vanilla this_patch
Hmean 64 732.14 ( 0.00%) 730.45 ( -0.23%)
Hmean 128 1417.46 ( 0.00%) 1419.44 ( 0.14%)
Hmean 256 2679.67 ( 0.00%) 2676.45 ( -0.12%)
Hmean 1024 8328.52 ( 0.00%) 8339.34 ( 0.13%)
Hmean 2048 12716.98 ( 0.00%) 12743.68 ( 0.21%)
Hmean 3312 15787.79 ( 0.00%) 15887.25 ( 0.63%)
Hmean 4096 17311.91 ( 0.00%) 17332.68 ( 0.12%)
Hmean 8192 20310.73 ( 0.00%) 20465.09 ( 0.76%)
Link: https://lore.kernel.org/all/875xjmuiup.fsf@DESKTOP-5N7EMDA/ [1]
Link: https://lkml.kernel.org/r/20250407105219.55351-1-nikhil.dhama@amd.com
Fixes: 6ccdcb6d3a74 ("mm, pcp: reduce detecting time of consecutive high order page freeing")
Signed-off-by: Nikhil Dhama <nikhil.dhama@amd.com>
Suggested-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Bharata B Rao <bharata@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "try_" prefix is confusing, since it made people believe that try_alloc_pages() is analogous to spin_trylock() and NULL return means EAGAIN. This is not the case. If it returns NULL there is no reason to call it again. It will most likely return NULL again. Hence rename it to alloc_pages_nolock() to make it symmetrical to free_pages_nolock() and document that NULL means ENOMEM. Link: https://lkml.kernel.org/r/20250517003446.60260-1-alexei.starovoitov@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Harry Yoo <harry.yoo@oracle.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939a5 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__alloc_pages_slowpath has no change detection for ac->nodemask in the
part of retry path, while cpuset can modify it in parallel. For some
processes that set mempolicy as MPOL_BIND, this results ac->nodemask
changes, and then the should_reclaim_retry will judge based on the latest
nodemask and jump to retry, while the get_page_from_freelist only
traverses the zonelist from ac->preferred_zoneref, which selected by a
expired nodemask and may cause infinite retries in some cases
cpu 64:
__alloc_pages_slowpath {
/* ..... */
retry:
/* ac->nodemask = 0x1, ac->preferred->zone->nid = 1 */
if (alloc_flags & ALLOC_KSWAPD)
wake_all_kswapds(order, gfp_mask, ac);
/* cpu 1:
cpuset_write_resmask
update_nodemask
update_nodemasks_hier
update_tasks_nodemask
mpol_rebind_task
mpol_rebind_policy
mpol_rebind_nodemask
// mempolicy->nodes has been modified,
// which ac->nodemask point to
*/
/* ac->nodemask = 0x3, ac->preferred->zone->nid = 1 */
if (should_reclaim_retry(gfp_mask, order, ac, alloc_flags,
did_some_progress > 0, &no_progress_loops))
goto retry;
}
Simultaneously starting multiple cpuset01 from LTP can quickly reproduce
this issue on a multi node server when the maximum memory pressure is
reached and the swap is enabled
Link: https://lkml.kernel.org/r/20250416082405.20988-1-zhangtianyang@loongson.cn
Fixes: c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "vmscan: enforce mems_effective during demotion", v5. Change reclaim to respect cpuset.mems_effective during demotion when possible. Presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. Implement cpuset_node_allowed() to check the cpuset.mems_effective associated wih the mem_cgroup of the lruvec being scanned. This only applies to cgroup/cpuset v2, as cpuset exists in a different hierarchy than mem_cgroup in v1. This requires renaming the existing cpuset_node_allowed() to be cpuset_current_now_allowed() - which is more descriptive anyway - to implement the new cpuset_node_allowed() which takes a target cgroup. This patch (of 2): Rename cpuset_node_allowed to reflect that the function checks the current task's cpuset.mems. This allows us to make a new cpuset_node_allowed function that checks a target cgroup's cpuset.mems. Link: https://lkml.kernel.org/r/20250424202806.52632-1-gourry@gourry.net Link: https://lkml.kernel.org/r/20250424202806.52632-2-gourry@gourry.net Signed-off-by: Gregory Price <gourry@gourry.net> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
find_suitable_fallback() is not as efficient as it could be, and somewhat
difficult to follow.
1. should_try_claim_block() is a loop invariant. There is no point in
checking fallback areas if the caller is interested in claimable
blocks but the order and the migratetype don't allow for that.
2. __rmqueue_steal() doesn't care about claimability, so it shouldn't
have to run those tests.
Different callers want different things from this helper:
1. __compact_finished() scans orders up until it finds a claimable block
2. __rmqueue_claim() scans orders down as long as blocks are claimable
3. __rmqueue_steal() doesn't care about claimability at all
Move should_try_claim_block() out of the loop. Only test it for the
two callers who care in the first place. Distinguish "no blocks" from
"order + mt are not claimable" in the return value; __rmqueue_claim()
can stop once order becomes unclaimable, __compact_finished() can keep
advancing until order becomes claimable.
Before:
Performance counter stats for './run case-lru-file-mmap-read' (5 runs):
85,294.85 msec task-clock # 5.644 CPUs utilized ( +- 0.32% )
15,968 context-switches # 187.209 /sec ( +- 3.81% )
153 cpu-migrations # 1.794 /sec ( +- 3.29% )
801,808 page-faults # 9.400 K/sec ( +- 0.10% )
733,358,331,786 instructions # 1.87 insn per cycle ( +- 0.20% ) (64.94%)
392,622,904,199 cycles # 4.603 GHz ( +- 0.31% ) (64.84%)
148,563,488,531 branches # 1.742 G/sec ( +- 0.18% ) (63.86%)
152,143,228 branch-misses # 0.10% of all branches ( +- 1.19% ) (62.82%)
15.1128 +- 0.0637 seconds time elapsed ( +- 0.42% )
After:
Performance counter stats for './run case-lru-file-mmap-read' (5 runs):
84,380.21 msec task-clock # 5.664 CPUs utilized ( +- 0.21% )
16,656 context-switches # 197.392 /sec ( +- 3.27% )
151 cpu-migrations # 1.790 /sec ( +- 3.28% )
801,703 page-faults # 9.501 K/sec ( +- 0.09% )
731,914,183,060 instructions # 1.88 insn per cycle ( +- 0.38% ) (64.90%)
388,673,535,116 cycles # 4.606 GHz ( +- 0.24% ) (65.06%)
148,251,482,143 branches # 1.757 G/sec ( +- 0.37% ) (63.92%)
149,766,550 branch-misses # 0.10% of all branches ( +- 1.22% ) (62.88%)
14.8968 +- 0.0486 seconds time elapsed ( +- 0.33% )
Link: https://lkml.kernel.org/r/20250407180154.63348-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Carlos Song <carlos.song@nxp.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor free_page_is_bad() to call bad_page() directly, removing the intermediate free_page_is_bad_report(). This reduces unnecessary indirection, improving code clarity and maintainability without changing functionality. Link: https://lkml.kernel.org/r/20250328012031.1204993-1-ye.liu@linux.dev Signed-off-by: Ye Liu <liuye@kylinos.cn> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the current code, batch is a local variable, and it cannot be
concurrently modified. It's unnecessary to use READ_ONCE here, so remove
it.
Link: https://lkml.kernel.org/r/CAA=HWd1kn01ym8YuVFuAqK2Ggq3itEGkqX8T6eCXs_C7tiv-Jw@mail.gmail.com
Fixes: 51a755c56dc0 ("mm: tune PCP high automatically")
Signed-off-by: Songtang Liu <liusongtang@bytedance.com>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>