linux.git/mm/internal.h, branch v3.15

mm/readahead.c: inline ra_submit

2014-04-07T23:35:58+00:00

Commit f9acc8c7b35a ("readahead: sanify file_ra_state names") left
ra_submit with a single function call.

Move ra_submit to internal.h and inline it to save some stack.  Thanks
to Andrew Morton for commenting different versions.

Signed-off-by: Fabian Frederick 
Suggested-by: Andrew Morton 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: page_alloc: spill to remote nodes before waking kswapd

2014-04-07T23:35:57+00:00

On NUMA systems, a node may start thrashing cache or even swap anonymous
pages while there are still free pages on remote nodes.

This is a result of commits 81c0a2bb515f ("mm: page_alloc: fair zone
allocator policy") and fff4068cba48 ("mm: page_alloc: revert NUMA aspect
of fair allocation policy").

Before those changes, the allocator would first try all allowed zones,
including those on remote nodes, before waking any kswapds.  But now,
the allocator fastpath doubles as the fairness pass, which in turn can
only consider the local node to prevent remote spilling based on
exhausted fairness batches alone.  Remote nodes are only considered in
the slowpath, after the kswapds are woken up.  But if remote nodes still
have free memory, kswapd should not be woken to rebalance the local node
or it may thrash cash or swap prematurely.

Fix this by adding one more unfair pass over the zonelist that is
allowed to spill to remote nodes after the local fairness pass fails but
before entering the slowpath and waking the kswapds.

This also gets rid of the GFP_THISNODE exemption from the fairness
protocol because the unfair pass is no longer tied to kswapd, which
GFP_THISNODE is not allowed to wake up.

However, because remote spills can be more frequent now - we prefer them
over local kswapd reclaim - the allocation batches on remote nodes could
underflow more heavily.  When resetting the batches, use
atomic_long_read() directly instead of zone_page_state() to calculate the
delta as the latter filters negative counter values.

Signed-off-by: Johannes Weiner 
Acked-by: Rik van Riel 
Acked-by: Mel Gorman 
Cc: 		[3.12+]

Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/page-writeback.c: do not count anon pages as dirtyable memory

2014-01-30T00:22:39+00:00

The VM is currently heavily tuned to avoid swapping.  Whether that is
good or bad is a separate discussion, but as long as the VM won't swap
to make room for dirty cache, we can not consider anonymous pages when
calculating the amount of dirtyable memory, the baseline to which
dirty_background_ratio and dirty_ratio are applied.

A simple workload that occupies a significant size (40+%, depending on
memory layout, storage speeds etc.) of memory with anon/tmpfs pages and
uses the remainder for a streaming writer demonstrates this problem.  In
that case, the actual cache pages are a small fraction of what is
considered dirtyable overall, which results in an relatively large
portion of the cache pages to be dirtied.  As kswapd starts rotating
these, random tasks enter direct reclaim and stall on IO.

Only consider free pages and file pages dirtyable.

Signed-off-by: Johannes Weiner 
Reported-by: Tejun Heo 
Tested-by: Tejun Heo 
Reviewed-by: Rik van Riel 
Cc: Mel Gorman 
Cc: Wu Fengguang 
Reviewed-by: Michal Hocko 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: improve documentation of page_order

2014-01-24T00:36:53+00:00

Developers occasionally try and optimise PFN scanners by using
page_order but miss that in general it requires zone->lock.  This has
happened twice for compaction.c and rejected both times.  This patch
clarifies the documentation of page_order and adds a note to
compaction.c why page_order is not used.

[akpm@linux-foundation.org: tweaks]
[lauraa@codeaurora.org: Corrected a page_zone(page)->lock reference]
Signed-off-by: Mel Gorman 
Acked-by: Rafael Aquini 
Acked-by: Minchan Kim 
Cc: Laura Abbott 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: show message when updating min_free_kbytes in thp

2014-01-24T00:36:52+00:00

min_free_kbytes may be raised during THP's initialization.  Sometimes,
this will change the value which was set by the user.  Showing this
message will clarify this confusion.

Only show this message when changing a value which was set by the user
according to Michal Hocko's suggestion.

Show the old value of min_free_kbytes according to Dave Hansen's
suggestion.  This will give user the chance to restore old value of
min_free_kbytes.

Signed-off-by: Han Pingtian 
Reviewed-by: Michal Hocko 
Cc: David Rientjes 
Cc: Mel Gorman 
Cc: Dave Hansen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE

2014-01-24T00:36:50+00:00

Most of the VM_BUG_ON assertions are performed on a page.  Usually, when
one of these assertions fails we'll get a BUG_ON with a call stack and
the registers.

I've recently noticed based on the requests to add a small piece of code
that dumps the page to various VM_BUG_ON sites that the page dump is
quite useful to people debugging issues in mm.

This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what
VM_BUG_ON() does, also dumps the page before executing the actual
BUG_ON.

[akpm@linux-foundation.org: fix up includes]
Signed-off-by: Sasha Levin 
Cc: "Kirill A. Shutemov" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: thp: __get_page_tail_foll() can use get_huge_page_tail()

2014-01-22T00:19:43+00:00

Cleanup. Change __get_page_tail_foll() to use get_huge_page_tail()
to avoid the code duplication.

Signed-off-by: Oleg Nesterov 
Cc: Thomas Gleixner 
Cc: Dave Jones 
Cc: Darren Hart 
Cc: Peter Zijlstra 
Cc: Mel Gorman 
Acked-by: Andrea Arcangeli 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: tail page refcounting optimization for slab and hugetlbfs

2014-01-22T00:19:43+00:00

This skips the _mapcount mangling for slab and hugetlbfs pages.

The main trouble in doing this is to guarantee that PageSlab and
PageHeadHuge remains constant for all get_page/put_page run on the tail
of slab or hugetlbfs compound pages.  Otherwise if they're set during
get_page but not set during put_page, the _mapcount of the tail page
would underflow.

PageHeadHuge will remain true until the compound page is released and
enters the buddy allocator so it won't risk to change even if the tail
page is the last reference left on the page.

PG_slab instead is cleared before the slab frees the head page with
put_page, so if the tail pin is released after the slab freed the page,
we would have a problem.  But in the slab case the tail pin cannot be
the last reference left on the page.  This is because the slab code is
free to reuse the compound page after a kfree/kmem_cache_free without
having to check if there's any tail pin left.  In turn all tail pins
must be always released while the head is still pinned by the slab code
and so we know PG_slab will be still set too.

Signed-off-by: Andrea Arcangeli 
Reviewed-by: Khalid Aziz 
Cc: Pravin Shelar 
Cc: Greg Kroah-Hartman 
Cc: Ben Hutchings 
Cc: Christoph Lameter 
Cc: Johannes Weiner 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Andi Kleen 
Cc: Minchan Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: vmscan: fix do_try_to_free_pages() livelock

2013-09-11T22:58:01+00:00

This patch is based on KOSAKI's work and I add a little more description,
please refer https://lkml.org/lkml/2012/6/14/74.

Currently, I found system can enter a state that there are lots of free
pages in a zone but only order-0 and order-1 pages which means the zone is
heavily fragmented, then high order allocation could make direct reclaim
path's long stall(ex, 60 seconds) especially in no swap and no compaciton
enviroment.  This problem happened on v3.4, but it seems issue still lives
in current tree, the reason is do_try_to_free_pages enter live lock:

kswapd will go to sleep if the zones have been fully scanned and are still
not balanced.  As kswapd thinks there's little point trying all over again
to avoid infinite loop.  Instead it changes order from high-order to
0-order because kswapd think order-0 is the most important.  Look at
73ce02e9 in detail.  If watermarks are ok, kswapd will go back to sleep
and may leave zone->all_unreclaimable =3D 0.  It assume high-order users
can still perform direct reclaim if they wish.

Direct reclaim continue to reclaim for a high order which is not a
COSTLY_ORDER without oom-killer until kswapd turn on
zone->all_unreclaimble= .  This is because to avoid too early oom-kill.
So it means direct_reclaim depends on kswapd to break this loop.

In worst case, direct-reclaim may continue to page reclaim forever when
kswapd sleeps forever until someone like watchdog detect and finally kill
the process.  As described in:
http://thread.gmane.org/gmane.linux.kernel.mm/103737

We can't turn on zone->all_unreclaimable from direct reclaim path because
direct reclaim path don't take any lock and this way is racy.  Thus this
patch removes zone->all_unreclaimable field completely and recalculates
zone reclaimable state every time.

Note: we can't take the idea that direct-reclaim see zone->pages_scanned
directly and kswapd continue to use zone->all_unreclaimable.  Because, it
is racy.  commit 929bea7c71 (vmscan: all_unreclaimable() use
zone->all_unreclaimable as a name) describes the detail.

[akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()]
Cc: Aaditya Kumar 
Cc: Ying Han 
Cc: Nick Piggin 
Acked-by: Rik van Riel 
Cc: Mel Gorman 
Cc: KAMEZAWA Hiroyuki 
Cc: Christoph Lameter 
Cc: Bob Liu 
Cc: Neil Zhang 
Cc: Russell King - ARM Linux 
Reviewed-by: Michal Hocko 
Acked-by: Minchan Kim 
Acked-by: Johannes Weiner 
Signed-off-by: KOSAKI Motohiro 
Signed-off-by: Lisa Du 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: remove unused __put_page()

2013-07-09T17:33:22+00:00

This function is nowhere used, and it has a confusing name with put_page
in mm/swap.c.  So better to remove it.

Signed-off-by: Zhang Yanfei 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds