<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/lib, branch v3.11-rc2</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>kernel: delete __cpuinit usage from all core kernel files</title>
<updated>2013-07-14T23:36:59+00:00</updated>
<author>
<name>Paul Gortmaker</name>
<email>paul.gortmaker@windriver.com</email>
</author>
<published>2013-06-19T18:53:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0db0628d90125193280eabb501c94feaf48fa9ab'/>
<id>0db0628d90125193280eabb501c94feaf48fa9ab</id>
<content type='text'>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.

[1] https://lkml.org/lkml/2013/5/20/589

Signed-off-by: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.

[1] https://lkml.org/lkml/2013/5/20/589

Signed-off-by: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs</title>
<updated>2013-07-14T18:42:26+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-07-14T18:42:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=41d9884c44237cd66e2bdbc412028b29196b344c'/>
<id>41d9884c44237cd66e2bdbc412028b29196b344c</id>
<content type='text'>
Pull more vfs stuff from Al Viro:
 "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including
  making simple_lookup() usable for filesystems with non-NULL s_d_op,
  which allows us to get rid of quite a bit of ugliness"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  sunrpc: now we can just set -&gt;s_d_op
  cgroup: we can use simple_lookup() now
  efivarfs: we can use simple_lookup() now
  make simple_lookup() usable for filesystems that set -&gt;s_d_op
  configfs: don't open-code d_alloc_name()
  __rpc_lookup_create_exclusive: pass string instead of qstr
  rpc_create_*_dir: don't bother with qstr
  llist: llist_add() can use llist_add_batch()
  llist: fix/simplify llist_add() and llist_add_batch()
  fput: turn "list_head delayed_fput_list" into llist_head
  fs/file_table.c:fput(): add comment
  Safer ABI for O_TMPFILE
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull more vfs stuff from Al Viro:
 "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including
  making simple_lookup() usable for filesystems with non-NULL s_d_op,
  which allows us to get rid of quite a bit of ugliness"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  sunrpc: now we can just set -&gt;s_d_op
  cgroup: we can use simple_lookup() now
  efivarfs: we can use simple_lookup() now
  make simple_lookup() usable for filesystems that set -&gt;s_d_op
  configfs: don't open-code d_alloc_name()
  __rpc_lookup_create_exclusive: pass string instead of qstr
  rpc_create_*_dir: don't bother with qstr
  llist: llist_add() can use llist_add_batch()
  llist: fix/simplify llist_add() and llist_add_batch()
  fput: turn "list_head delayed_fput_list" into llist_head
  fs/file_table.c:fput(): add comment
  Safer ABI for O_TMPFILE
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip</title>
<updated>2013-07-13T22:35:12+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-07-13T22:35:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4fa109b13042868de84bedc70ea9b8337b502cf9'/>
<id>4fa109b13042868de84bedc70ea9b8337b502cf9</id>
<content type='text'>
Pull core locking updates from Thomas Gleixner:
 "Header cleanup as requested by Linus"

(This is the "don't include support for ww_mutex in a header file that
everybody wants, when almost nobody wants the ww part" change)

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Move ww_mutex definitions to ww_mutex.h
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull core locking updates from Thomas Gleixner:
 "Header cleanup as requested by Linus"

(This is the "don't include support for ww_mutex in a header file that
everybody wants, when almost nobody wants the ww part" change)

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Move ww_mutex definitions to ww_mutex.h
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus</title>
<updated>2013-07-13T21:52:21+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-07-13T21:52:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d1447464789918db1e1a3d0aaf50d3d0f6487a4f'/>
<id>d1447464789918db1e1a3d0aaf50d3d0f6487a4f</id>
<content type='text'>
Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove &lt;asm/kspd.h&gt;
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove &lt;asm/kspd.h&gt;
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>llist: fix/simplify llist_add() and llist_add_batch()</title>
<updated>2013-07-13T09:29:24+00:00</updated>
<author>
<name>Oleg Nesterov</name>
<email>oleg@redhat.com</email>
</author>
<published>2013-07-08T21:24:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=fb4214db50b00558cc6e274c88b3f7325068e942'/>
<id>fb4214db50b00558cc6e274c88b3f7325068e942</id>
<content type='text'>
1. This is mostly theoretical, but llist_add*() need ACCESS_ONCE().

   Otherwise it is not guaranteed that the first cmpxchg() uses the
   same value for old_entry and new_last-&gt;next.

2. These helpers cache the result of cmpxchg() and read the initial
   value of head-&gt;first before the main loop. I do not think this
   makes sense. In the likely case cmpxchg() succeeds, otherwise
   it doesn't hurt to reload head-&gt;first.

   I think it would be better to simplify the code and simply read
   -&gt;first before cmpxchg().

Signed-off-by: Oleg Nesterov &lt;oleg@redhat.com&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Andrey Vagin &lt;avagin@openvz.org&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: David Howells &lt;dhowells@redhat.com&gt;
Cc: Huang Ying &lt;ying.huang@intel.com&gt;
Cc: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
1. This is mostly theoretical, but llist_add*() need ACCESS_ONCE().

   Otherwise it is not guaranteed that the first cmpxchg() uses the
   same value for old_entry and new_last-&gt;next.

2. These helpers cache the result of cmpxchg() and read the initial
   value of head-&gt;first before the main loop. I do not think this
   makes sense. In the likely case cmpxchg() succeeds, otherwise
   it doesn't hurt to reload head-&gt;first.

   I think it would be better to simplify the code and simply read
   -&gt;first before cmpxchg().

Signed-off-by: Oleg Nesterov &lt;oleg@redhat.com&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Andrey Vagin &lt;avagin@openvz.org&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: David Howells &lt;dhowells@redhat.com&gt;
Cc: Huang Ying &lt;ying.huang@intel.com&gt;
Cc: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mutex: Move ww_mutex definitions to ww_mutex.h</title>
<updated>2013-07-12T10:07:46+00:00</updated>
<author>
<name>Maarten Lankhorst</name>
<email>maarten.lankhorst@canonical.com</email>
</author>
<published>2013-07-05T07:29:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=1b375dc30710180c4b88cc59caba6e3481ec5c8b'/>
<id>1b375dc30710180c4b88cc59caba6e3481ec5c8b</id>
<content type='text'>
Move the definitions for wound/wait mutexes out to a separate
header, ww_mutex.h. This reduces clutter in mutex.h, and
increases readability.

Suggested-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Maarten Lankhorst &lt;maarten.lankhorst@canonical.com&gt;
Acked-by: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Acked-by: Rik van Riel &lt;riel@redhat.com&gt;
Acked-by: Maarten Lankhorst &lt;maarten.lankhorst@canonical.com&gt;
Cc: Dave Airlie &lt;airlied@gmail.com&gt;
Link: http://lkml.kernel.org/r/51D675DC.3000907@canonical.com
[ Tidied up the code a bit. ]
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move the definitions for wound/wait mutexes out to a separate
header, ww_mutex.h. This reduces clutter in mutex.h, and
increases readability.

Suggested-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Maarten Lankhorst &lt;maarten.lankhorst@canonical.com&gt;
Acked-by: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Acked-by: Rik van Riel &lt;riel@redhat.com&gt;
Acked-by: Maarten Lankhorst &lt;maarten.lankhorst@canonical.com&gt;
Cc: Dave Airlie &lt;airlied@gmail.com&gt;
Link: http://lkml.kernel.org/r/51D675DC.3000907@canonical.com
[ Tidied up the code a bit. ]
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next</title>
<updated>2013-07-10T01:24:39+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-07-10T01:24:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=496322bc91e35007ed754184dcd447a02b6dd685'/>
<id>496322bc91e35007ed754184dcd447a02b6dd685</id>
<content type='text'>
Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a999 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a999 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>lib/scatterlist: error handling in __sg_alloc_table()</title>
<updated>2013-07-09T17:33:31+00:00</updated>
<author>
<name>Dan Carpenter</name>
<email>dan.carpenter@oracle.com</email>
</author>
<published>2013-07-08T23:01:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=27daabd9b6a157c34a6e7a7f509fa26866e6420f'/>
<id>27daabd9b6a157c34a6e7a7f509fa26866e6420f</id>
<content type='text'>
I was reviewing code which I suspected might allocate a zero size SG
table.  That will cause memory corruption.  Also we can't return before
doing the memset or we could end up using uninitialized memory in the
cleanup path.

Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Cc: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Cc: Imre Deak &lt;imre.deak@intel.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
Cc: Maxim Levitsky &lt;maximlevitsky@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
I was reviewing code which I suspected might allocate a zero size SG
table.  That will cause memory corruption.  Also we can't return before
doing the memset or we could end up using uninitialized memory in the
cleanup path.

Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Cc: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Cc: Imre Deak &lt;imre.deak@intel.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
Cc: Maxim Levitsky &lt;maximlevitsky@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lib/scatterlist: introduce sg_pcopy_from_buffer() and sg_pcopy_to_buffer()</title>
<updated>2013-07-09T17:33:30+00:00</updated>
<author>
<name>Akinobu Mita</name>
<email>akinobu.mita@gmail.com</email>
</author>
<published>2013-07-08T23:01:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=df642cea25c90dc7d5dcd9d3b480b6b59de7d787'/>
<id>df642cea25c90dc7d5dcd9d3b480b6b59de7d787</id>
<content type='text'>
The only difference between sg_pcopy_{from,to}_buffer() and
sg_copy_{from,to}_buffer() is an additional argument that specifies the
number of bytes to skip the SG list before copying.

Signed-off-by: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: "James E.J. Bottomley" &lt;JBottomley@parallels.com&gt;
Cc: Douglas Gilbert &lt;dgilbert@interlog.com&gt;
Cc: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Cc: Horia Geanta &lt;horia.geanta@freescale.com&gt;
Cc: Imre Deak &lt;imre.deak@intel.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The only difference between sg_pcopy_{from,to}_buffer() and
sg_copy_{from,to}_buffer() is an additional argument that specifies the
number of bytes to skip the SG list before copying.

Signed-off-by: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: "James E.J. Bottomley" &lt;JBottomley@parallels.com&gt;
Cc: Douglas Gilbert &lt;dgilbert@interlog.com&gt;
Cc: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Cc: Horia Geanta &lt;horia.geanta@freescale.com&gt;
Cc: Imre Deak &lt;imre.deak@intel.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lib/scatterlist: factor out sg_miter_get_next_page() from sg_miter_next()</title>
<updated>2013-07-09T17:33:30+00:00</updated>
<author>
<name>Akinobu Mita</name>
<email>akinobu.mita@gmail.com</email>
</author>
<published>2013-07-08T23:01:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=1105200480b4faeb673d1b23658650b003302c06'/>
<id>1105200480b4faeb673d1b23658650b003302c06</id>
<content type='text'>
This patchset introduces sg_pcopy_from_buffer() and sg_pcopy_to_buffer(),
which copy data between a linear buffer and an SG list.

The only difference between sg_pcopy_{from,to}_buffer() and
sg_copy_{from,to}_buffer() is an additional argument that specifies the
number of bytes to skip the SG list before copying.

The main reason for introducing these functions is to fix a problem in
scsi_debug module.  And there is a local function in crypto/talitos
module, which can be replaced by sg_pcopy_to_buffer().

This patch:

sg_miter_get_next_page() is used to proceed page iterator to the next page
if necessary, and will be used to implement the variants of
sg_copy_{from,to}_buffer() later.

Signed-off-by: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Imre Deak &lt;imre.deak@intel.com&gt;
Cc: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: "James E.J. Bottomley" &lt;JBottomley@parallels.com&gt;
Cc: Douglas Gilbert &lt;dgilbert@interlog.com&gt;
Cc: Horia Geanta &lt;horia.geanta@freescale.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patchset introduces sg_pcopy_from_buffer() and sg_pcopy_to_buffer(),
which copy data between a linear buffer and an SG list.

The only difference between sg_pcopy_{from,to}_buffer() and
sg_copy_{from,to}_buffer() is an additional argument that specifies the
number of bytes to skip the SG list before copying.

The main reason for introducing these functions is to fix a problem in
scsi_debug module.  And there is a local function in crypto/talitos
module, which can be replaced by sg_pcopy_to_buffer().

This patch:

sg_miter_get_next_page() is used to proceed page iterator to the next page
if necessary, and will be used to implement the variants of
sg_copy_{from,to}_buffer() later.

Signed-off-by: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Imre Deak &lt;imre.deak@intel.com&gt;
Cc: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: "James E.J. Bottomley" &lt;JBottomley@parallels.com&gt;
Cc: Douglas Gilbert &lt;dgilbert@interlog.com&gt;
Cc: Horia Geanta &lt;horia.geanta@freescale.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
