linux.git/kernel, branch v5.0-rc8 Linux kernel source tree Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-02-24T17:28:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-02-24T17:28:26+00:00 c4eb1e1852df60d61e04a6b580a0490460c9e31b Pull networking fixes from David Miller: "Hopefully the last pull request for this release. Fingers crossed: 1) Only refcount ESP stats on full sockets, from Martin Willi. 2) Missing barriers in AF_UNIX, from Al Viro. 3) RCU protection fixes in ipv6 route code, from Paolo Abeni. 4) Avoid false positives in untrusted GSO validation, from Willem de Bruijn. 5) Forwarded mesh packets in mac80211 need more tailroom allocated, from Felix Fietkau. 6) Use operstate consistently for linkup in team driver, from George Wilkie. 7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF and PF code paths. 8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni. 9) nfp eBPF code gen fixes from Jiong Wang. 10) bnxt_en firmware timeout fix from Michael Chan. 11) Use after free in udp/udpv6 error handlers, from Paolo Abeni. 12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) net: phy: realtek: Dummy IRQ calls for RTL8366RB tcp: repaired skbs must init their tso_segs net/x25: fix a race in x25_bind() net: dsa: Remove documentation for port_fdb_prepare Revert "bridge: do not add port to router list when receives query with source 0.0.0.0" selftests: fib_tests: sleep after changing carrier. again. net: set static variable an initial value in atl2_probe() net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G bpf, doc: add bpf list as secondary entry to maintainers file udp: fix possible user after free in error handler udpv6: fix possible user after free in error handler fou6: fix proto error handler argument type udpv6: add the required annotation to mib type mdio_bus: Fix use-after-free on device_register fails net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 bnxt_en: Wait longer for the firmware message response to complete. bnxt_en: Fix typo in firmware message timeout logic. nfp: bpf: fix ALU32 high bits clearance bug nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K Documentation: networking: switchdev: Update port parent ID section ... 
Pull networking fixes from David Miller:
 "Hopefully the last pull request for this release. Fingers crossed:

   1) Only refcount ESP stats on full sockets, from Martin Willi.

   2) Missing barriers in AF_UNIX, from Al Viro.

   3) RCU protection fixes in ipv6 route code, from Paolo Abeni.

   4) Avoid false positives in untrusted GSO validation, from Willem de
      Bruijn.

   5) Forwarded mesh packets in mac80211 need more tailroom allocated,
      from Felix Fietkau.

   6) Use operstate consistently for linkup in team driver, from George
      Wilkie.

   7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF
      and PF code paths.

   8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni.

   9) nfp eBPF code gen fixes from Jiong Wang.

  10) bnxt_en firmware timeout fix from Michael Chan.

  11) Use after free in udp/udpv6 error handlers, from Paolo Abeni.

  12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  net: phy: realtek: Dummy IRQ calls for RTL8366RB
  tcp: repaired skbs must init their tso_segs
  net/x25: fix a race in x25_bind()
  net: dsa: Remove documentation for port_fdb_prepare
  Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"
  selftests: fib_tests: sleep after changing carrier. again.
  net: set static variable an initial value in atl2_probe()
  net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G
  bpf, doc: add bpf list as secondary entry to maintainers file
  udp: fix possible user after free in error handler
  udpv6: fix possible user after free in error handler
  fou6: fix proto error handler argument type
  udpv6: add the required annotation to mib type
  mdio_bus: Fix use-after-free on device_register fails
  net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255
  bnxt_en: Wait longer for the firmware message response to complete.
  bnxt_en: Fix typo in firmware message timeout logic.
  nfp: bpf: fix ALU32 high bits clearance bug
  nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K
  Documentation: networking: switchdev: Update port parent ID section
  ...
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 2019-02-23T04:45:38+00:00 David S. Miller davem@davemloft.net 2019-02-23T04:45:38+00:00 ea34a003645c25e15892fe1e268f8faf5a335533 Daniel Borkmann says: ==================== pull-request: bpf 2019-02-23 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in BPF's LPM deletion logic to match correct prefix length, from Alban. 2) Fix AF_XDP teardown by not destroying umem prematurely as it is still needed till all outstanding skbs are freed, from Björn. 3) Fix unkillable BPF_PROG_TEST_RUN under preempt kernel by checking signal_pending() outside need_resched() condition which is never triggered there, from Stanislav. 4) Fix two nfp JIT bugs, one in code emission for K-based xor, and another one to explicitly clear upper bits in alu32, from Jiong. 5) Add bpf list address to maintainers file, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Daniel Borkmann says:

====================
pull-request: bpf 2019-02-23

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a bug in BPF's LPM deletion logic to match correct prefix
   length, from Alban.

2) Fix AF_XDP teardown by not destroying umem prematurely as it
   is still needed till all outstanding skbs are freed, from Björn.

3) Fix unkillable BPF_PROG_TEST_RUN under preempt kernel by checking
   signal_pending() outside need_resched() condition which is never
   triggered there, from Stanislav.

4) Fix two nfp JIT bugs, one in code emission for K-based xor, and
   another one to explicitly clear upper bits in alu32, from Jiong.

5) Add bpf list address to maintainers file, from Daniel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
bpf, lpm: fix lookup bug in map_delete_elem 2019-02-22T15:17:53+00:00 Alban Crequy alban@kinvolk.io 2019-02-22T13:19:08+00:00 7c0cdf0b3940f63d9777c3fcf250a2f83859ca54 trie_delete_elem() was deleting an entry even though it was not matching if the prefixlen was correct. This patch adds a check on matchlen. Reproducer: $ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1 $ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01 $ sudo bpftool map dump pinned /sys/fs/bpf/mylpm key: 10 00 00 00 aa bb cc dd value: 01 Found 1 element $ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff $ echo $? 0 $ sudo bpftool map dump pinned /sys/fs/bpf/mylpm Found 0 elements A similar reproducer is added in the selftests. Without the patch: $ sudo ./tools/testing/selftests/bpf/test_lpm_map test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed. Aborted With the patch: test_lpm_map runs without errors. Fixes: e454cf595853 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE") Cc: Craig Gallek <kraig@google.com> Signed-off-by: Alban Crequy <alban@kinvolk.io> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 
trie_delete_elem() was deleting an entry even though it was not matching
if the prefixlen was correct. This patch adds a check on matchlen.

Reproducer:

$ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1
$ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
key: 10 00 00 00 aa bb cc dd  value: 01
Found 1 element
$ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff
$ echo $?
0
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
Found 0 elements

A similar reproducer is added in the selftests.

Without the patch:

$ sudo ./tools/testing/selftests/bpf/test_lpm_map
test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed.
Aborted

With the patch: test_lpm_map runs without errors.

Fixes: e454cf595853 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE")
Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
psi: avoid divide-by-zero crash inside virtual machines 2019-02-21T17:01:00+00:00 Johannes Weiner hannes@cmpxchg.org 2019-02-21T06:19:59+00:00 4e37504d1c49eec6434d0cc97278d2b51c9e8763 We've been seeing hard-to-trigger psi crashes when running inside VM instances: divide error: 0000 [#1] SMP PTI Modules linked in: [...] CPU: 0 PID: 212 Comm: kworker/0:2 Not tainted 4.16.18-119_fbk9_3817_gfe944c98d695 #119 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Workqueue: events psi_clock RIP: 0010:psi_update_stats+0x270/0x490 RSP: 0018:ffffc90001117e10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800a35a13f8 RDX: 0000000000000000 RSI: ffff8800a35a1340 RDI: 0000000000000000 RBP: 0000000000000658 R08: ffff8800a35a1470 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000f8502 FS: 0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe370fa000 CR3: 00000000b1e3a000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: psi_clock+0x12/0x50 process_one_work+0x1e0/0x390 worker_thread+0x2b/0x3c0 ? rescuer_thread+0x330/0x330 kthread+0x113/0x130 ? kthread_create_worker_on_cpu+0x40/0x40 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Code: 48 0f 47 c7 48 01 c2 45 85 e4 48 89 16 0f 85 e6 00 00 00 4c 8b 49 10 4c 8b 51 08 49 69 d9 f2 07 00 00 48 6b c0 64 4c 8b 29 31 d2 <48> f7 f7 49 69 d5 8d 06 00 00 48 89 c5 4c 69 f0 00 98 0b 00 48 The Code-line points to `period` being 0 inside update_stats(), and we divide by that when calculating that period's pressure percentage. The elapsed period should never be 0. The reason this can happen is due to an off-by-one in the idle time / missing period calculation combined with a coarse sched_clock() in the virtual machine. The target time for aggregation is advanced into the future on a fixed grid to prevent clock drift. So when an aggregation runs after some idle period, we can not just set it to "now + psi_period", but have to calculate the downtime and advance the target time relative to itself. However, if the aggregator was disabled exactly one psi_period (ns), we drop one idle period in the calculation due to a > when we should do >=. In that case, next_update will be advanced from 'now - psi_period' to 'now' when it should be moved to 'now + psi_period'. The run finishes with last_update == next_update == sched_clock(). With hardware clocks, this exact nanosecond match isn't likely in the first place; but if it does happen, the clock will still have moved on and the period non-zero by the time the worker runs. A pointlessly short period, but besides the extra work, no harm no foul. However, a slow sched_clock() like we have on VMs might not have advanced either by the time the worker runs again. And when we calculate the elapsed period, the result, our pressure divisor, will be 0. Ouch. Fix this by correctly handling the situation when the elapsed time between aggregation runs is precisely two periods, and advance the expiration timestamp correctly to period into the future. Link: http://lkml.kernel.org/r/20190214193157.15788-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Łukasz Siudut <lsiudut@fb.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
We've been seeing hard-to-trigger psi crashes when running inside VM
instances:

    divide error: 0000 [#1] SMP PTI
    Modules linked in: [...]
    CPU: 0 PID: 212 Comm: kworker/0:2 Not tainted 4.16.18-119_fbk9_3817_gfe944c98d695 #119
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
    Workqueue: events psi_clock
    RIP: 0010:psi_update_stats+0x270/0x490
    RSP: 0018:ffffc90001117e10 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800a35a13f8
    RDX: 0000000000000000 RSI: ffff8800a35a1340 RDI: 0000000000000000
    RBP: 0000000000000658 R08: ffff8800a35a1470 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000f8502
    FS:  0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fbe370fa000 CR3: 00000000b1e3a000 CR4: 00000000000006f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     psi_clock+0x12/0x50
     process_one_work+0x1e0/0x390
     worker_thread+0x2b/0x3c0
     ? rescuer_thread+0x330/0x330
     kthread+0x113/0x130
     ? kthread_create_worker_on_cpu+0x40/0x40
     ? SyS_exit_group+0x10/0x10
     ret_from_fork+0x35/0x40
    Code: 48 0f 47 c7 48 01 c2 45 85 e4 48 89 16 0f 85 e6 00 00 00 4c 8b 49 10 4c 8b 51 08 49 69 d9 f2 07 00 00 48 6b c0 64 4c 8b 29 31 d2 <48> f7 f7 49 69 d5 8d 06 00 00 48 89 c5 4c 69 f0 00 98 0b 00 48

The Code-line points to `period` being 0 inside update_stats(), and we
divide by that when calculating that period's pressure percentage.

The elapsed period should never be 0.  The reason this can happen is due
to an off-by-one in the idle time / missing period calculation combined
with a coarse sched_clock() in the virtual machine.

The target time for aggregation is advanced into the future on a fixed
grid to prevent clock drift.  So when an aggregation runs after some idle
period, we can not just set it to "now + psi_period", but have to
calculate the downtime and advance the target time relative to itself.

However, if the aggregator was disabled exactly one psi_period (ns), we
drop one idle period in the calculation due to a > when we should do >=.
In that case, next_update will be advanced from 'now - psi_period' to
'now' when it should be moved to 'now + psi_period'.  The run finishes
with last_update == next_update == sched_clock().

With hardware clocks, this exact nanosecond match isn't likely in the
first place; but if it does happen, the clock will still have moved on and
the period non-zero by the time the worker runs.  A pointlessly short
period, but besides the extra work, no harm no foul.  However, a slow
sched_clock() like we have on VMs might not have advanced either by the
time the worker runs again.  And when we calculate the elapsed period, the
result, our pressure divisor, will be 0.  Ouch.

Fix this by correctly handling the situation when the elapsed time between
aggregation runs is precisely two periods, and advance the expiration
timestamp correctly to period into the future.

Link: http://lkml.kernel.org/r/20190214193157.15788-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Łukasz Siudut <lsiudut@fb.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-02-20T00:13:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-02-20T00:13:19+00:00 40e196a906d969fd10d885c692d2674b3d657006 Pull networking fixes from David Miller: 1) Fix suspend and resume in mt76x0u USB driver, from Stanislaw Gruszka. 2) Missing memory barriers in xsk, from Magnus Karlsson. 3) rhashtable fixes in mac80211 from Herbert Xu. 4) 32-bit MIPS eBPF JIT fixes from Paul Burton. 5) Fix for_each_netdev_feature() on big endian, from Hauke Mehrtens. 6) GSO validation fixes from Willem de Bruijn. 7) Endianness fix for dwmac4 timestamp handling, from Alexandre Torgue. 8) More strict checks in tcp_v4_err(), from Eric Dumazet. 9) af_alg_release should NULL out the sk after the sock_put(), from Mao Wenan. 10) Missing unlock in mac80211 mesh error path, from Wei Yongjun. 11) Missing device put in hns driver, from Salil Mehta. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) sky2: Increase D3 delay again vhost: correctly check the return value of translate_desc() in log_used() net: netcp: Fix ethss driver probe issue net: hns: Fixes the missing put_device in positive leg for roce reset net: stmmac: Fix a race in EEE enable callback qed: Fix iWARP syn packet mac address validation. qed: Fix iWARP buffer size provided for syn packet processing. r8152: Add support for MAC address pass through on RTL8153-BD mac80211: mesh: fix missing unlock on error in table_path_del() net/mlx4_en: fix spelling mistake: "quiting" -> "quitting" net: crypto set sk to NULL when af_alg_release. net: Do not allocate page fragments that are not skb aligned mm: Use fixed constant in page_frag_alloc instead of size + 1 tcp: tcp_v4_err() should be more careful tcp: clear icsk_backoff in tcp_write_queue_purge() net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe() qmi_wwan: apply SET_DTR quirk to Sierra WP7607 net: stmmac: handle endianness in dwmac4_get_timestamp doc: Mention MSG_ZEROCOPY implementation for UDP mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable ... 
Pull networking fixes from David Miller:

 1) Fix suspend and resume in mt76x0u USB driver, from Stanislaw
    Gruszka.

 2) Missing memory barriers in xsk, from Magnus Karlsson.

 3) rhashtable fixes in mac80211 from Herbert Xu.

 4) 32-bit MIPS eBPF JIT fixes from Paul Burton.

 5) Fix for_each_netdev_feature() on big endian, from Hauke Mehrtens.

 6) GSO validation fixes from Willem de Bruijn.

 7) Endianness fix for dwmac4 timestamp handling, from Alexandre Torgue.

 8) More strict checks in tcp_v4_err(), from Eric Dumazet.

 9) af_alg_release should NULL out the sk after the sock_put(), from Mao
    Wenan.

10) Missing unlock in mac80211 mesh error path, from Wei Yongjun.

11) Missing device put in hns driver, from Salil Mehta.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  sky2: Increase D3 delay again
  vhost: correctly check the return value of translate_desc() in log_used()
  net: netcp: Fix ethss driver probe issue
  net: hns: Fixes the missing put_device in positive leg for roce reset
  net: stmmac: Fix a race in EEE enable callback
  qed: Fix iWARP syn packet mac address validation.
  qed: Fix iWARP buffer size provided for syn packet processing.
  r8152: Add support for MAC address pass through on RTL8153-BD
  mac80211: mesh: fix missing unlock on error in table_path_del()
  net/mlx4_en: fix spelling mistake: "quiting" -> "quitting"
  net: crypto set sk to NULL when af_alg_release.
  net: Do not allocate page fragments that are not skb aligned
  mm: Use fixed constant in page_frag_alloc instead of size + 1
  tcp: tcp_v4_err() should be more careful
  tcp: clear icsk_backoff in tcp_write_queue_purge()
  net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
  qmi_wwan: apply SET_DTR quirk to Sierra WP7607
  net: stmmac: handle endianness in dwmac4_get_timestamp
  doc: Mention MSG_ZEROCOPY implementation for UDP
  mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable
  ...
Merge tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace 2019-02-18T17:40:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-02-18T17:40:16+00:00 10f4902173130fcbb02a69566fefab35fc5f1f30 Pull tracing fixes from Steven Rostedt: "Two more tracing fixes - Have kprobes not use copy_from_user() to access kernel addresses, because kprobes can legitimately poke at bad kernel memory, which will fault. Copy from user code should never fault in kernel space. Using probe_mem_read() can handle kernel address space faulting. - Put back the entries counter in the tracing output that was accidentally removed" * tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix number of entries in trace header kprobe: Do not use uaccess functions to access kernel memory that can fault 
Pull tracing fixes from Steven Rostedt:
 "Two more tracing fixes

   - Have kprobes not use copy_from_user() to access kernel addresses,
     because kprobes can legitimately poke at bad kernel memory, which
     will fault. Copy from user code should never fault in kernel space.
     Using probe_mem_read() can handle kernel address space faulting.

   - Put back the entries counter in the tracing output that was
     accidentally removed"

* tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix number of entries in trace header
  kprobe: Do not use uaccess functions to access kernel memory that can fault
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-02-17T16:38:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-02-17T16:38:13+00:00 dd6f29da695dbfe5a8ff84ebfdd2110d68e8f511 Pull perf fixes from Ingo Molnar: "Two fixes on the kernel side: fix an over-eager condition that failed larger perf ring-buffer sizes, plus fix crashes in the Intel BTS code for a corner case, found by fuzzing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix impossible ring-buffer sizes warning perf/x86: Add check_period PMU callback 
Pull perf fixes from Ingo Molnar:
 "Two fixes on the kernel side: fix an over-eager condition that failed
  larger perf ring-buffer sizes, plus fix crashes in the Intel BTS code
  for a corner case, found by fuzzing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix impossible ring-buffer sizes warning
  perf/x86: Add check_period PMU callback
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 2019-02-17T06:34:07+00:00 David S. Miller davem@davemloft.net 2019-02-17T06:34:07+00:00 6e1077f51436e5ca9c415aec503333de1187b89a Alexei Starovoitov says: ==================== pull-request: bpf 2019-02-16 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix lockdep false positive in bpf_get_stackid(), from Alexei. 2) several AF_XDP fixes, from Bjorn, Magnus, Davidlohr. 3) fix narrow load from struct bpf_sock, from Martin. 4) mips JIT fixes, from Paul. 5) gso handling fix in bpf helpers, from Willem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Alexei Starovoitov says:

====================
pull-request: bpf 2019-02-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) fix lockdep false positive in bpf_get_stackid(), from Alexei.

2) several AF_XDP fixes, from Bjorn, Magnus, Davidlohr.

3) fix narrow load from struct bpf_sock, from Martin.

4) mips JIT fixes, from Paul.

5) gso handling fix in bpf helpers, from Willem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
tracing: Fix number of entries in trace header 2019-02-15T17:42:26+00:00 Quentin Perret quentin.perret@arm.com 2019-02-14T15:29:50+00:00 9e7382153f80ba45a0bbcd540fb77d4b15f6e966 The following commit 441dae8f2f29 ("tracing: Add support for display of tgid in trace output") removed the call to print_event_info() from print_func_help_header_irq() which results in the ftrace header not reporting the number of entries written in the buffer. As this wasn't the original intent of the patch, re-introduce the call to print_event_info() to restore the orginal behaviour. Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.com Acked-by: Joel Fernandes <joelaf@google.com> Cc: stable@vger.kernel.org Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output") Signed-off-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 
The following commit

  441dae8f2f29 ("tracing: Add support for display of tgid in trace output")

removed the call to print_event_info() from print_func_help_header_irq()
which results in the ftrace header not reporting the number of entries
written in the buffer. As this wasn't the original intent of the patch,
re-introduce the call to print_event_info() to restore the orginal
behaviour.

Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.com

Acked-by: Joel Fernandes <joelaf@google.com>
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
kprobe: Do not use uaccess functions to access kernel memory that can fault 2019-02-15T17:41:23+00:00 Changbin Du changbin.du@gmail.com 2019-01-25T15:10:50+00:00 2c4f1fcbef0bc324830bc2fb1a264c08ec93dec5 The userspace can ask kprobe to intercept strings at any memory address, including invalid kernel address. In this case, fetch_store_strlen() would crash since it uses general usercopy function, and user access functions are no longer allowed to access kernel memory. For example, we can crash the kernel by doing something as below: $ sudo kprobe 'p:do_sys_open +0(+0(%si)):string' [ 103.620391] BUG: GPF in non-whitelisted uaccess (non-canonical address?) [ 103.622104] general protection fault: 0000 [#1] SMP PTI [ 103.623424] CPU: 10 PID: 1046 Comm: cat Not tainted 5.0.0-rc3-00130-gd73aba1-dirty #96 [ 103.625321] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-2-g628b2e6-dirty-20190104_103505-linux 04/01/2014 [ 103.628284] RIP: 0010:process_fetch_insn+0x1ab/0x4b0 [ 103.629518] Code: 10 83 80 28 2e 00 00 01 31 d2 31 ff 48 8b 74 24 28 eb 0c 81 fa ff 0f 00 00 7f 1c 85 c0 75 18 66 66 90 0f ae e8 48 63 ca 89 f8 <8a> 0c 31 66 66 90 83 c2 01 84 c9 75 dc 89 54 24 34 89 44 24 28 48 [ 103.634032] RSP: 0018:ffff88845eb37ce0 EFLAGS: 00010246 [ 103.635312] RAX: 0000000000000000 RBX: ffff888456c4e5a8 RCX: 0000000000000000 [ 103.637057] RDX: 0000000000000000 RSI: 2e646c2f6374652f RDI: 0000000000000000 [ 103.638795] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 103.640556] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 103.642297] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 103.644040] FS: 0000000000000000(0000) GS:ffff88846f000000(0000) knlGS:0000000000000000 [ 103.646019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 103.647436] CR2: 00007ffc79758038 CR3: 0000000463360006 CR4: 0000000000020ee0 [ 103.649147] Call Trace: [ 103.649781] ? sched_clock_cpu+0xc/0xa0 [ 103.650747] ? do_sys_open+0x5/0x220 [ 103.651635] kprobe_trace_func+0x303/0x380 [ 103.652645] ? do_sys_open+0x5/0x220 [ 103.653528] kprobe_dispatcher+0x45/0x50 [ 103.654682] ? do_sys_open+0x1/0x220 [ 103.655875] kprobe_ftrace_handler+0x90/0xf0 [ 103.657282] ftrace_ops_assist_func+0x54/0xf0 [ 103.658564] ? __call_rcu+0x1dc/0x280 [ 103.659482] 0xffffffffc00000bf [ 103.660384] ? __ia32_sys_open+0x20/0x20 [ 103.661682] ? do_sys_open+0x1/0x220 [ 103.662863] do_sys_open+0x5/0x220 [ 103.663988] do_syscall_64+0x60/0x210 [ 103.665201] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 103.666862] RIP: 0033:0x7fc22fadccdd [ 103.668034] Code: 48 89 54 24 e0 41 83 e2 40 75 32 89 f0 25 00 00 41 00 3d 00 00 41 00 74 24 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 33 f3 c3 66 0f 1f 84 00 00 00 00 00 48 8d 44 [ 103.674029] RSP: 002b:00007ffc7972c3a8 EFLAGS: 00000287 ORIG_RAX: 0000000000000101 [ 103.676512] RAX: ffffffffffffffda RBX: 0000562f86147a21 RCX: 00007fc22fadccdd [ 103.678853] RDX: 0000000000080000 RSI: 00007fc22fae1428 RDI: 00000000ffffff9c [ 103.681151] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000 [ 103.683489] R10: 0000000000000000 R11: 0000000000000287 R12: 00007fc22fce90a8 [ 103.685774] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 103.688056] Modules linked in: [ 103.689131] ---[ end trace 43792035c28984a1 ]--- This can be fixed by using probe_mem_read() instead, as it can handle faulting kernel memory addresses, which kprobes can legitimately do. Link: http://lkml.kernel.org/r/20190125151051.7381-1-changbin.du@gmail.com Cc: stable@vger.kernel.org Fixes: 9da3f2b7405 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 
The userspace can ask kprobe to intercept strings at any memory address,
including invalid kernel address. In this case, fetch_store_strlen()
would crash since it uses general usercopy function, and user access
functions are no longer allowed to access kernel memory.

For example, we can crash the kernel by doing something as below:

$ sudo kprobe 'p:do_sys_open +0(+0(%si)):string'

[  103.620391] BUG: GPF in non-whitelisted uaccess (non-canonical address?)
[  103.622104] general protection fault: 0000 [#1] SMP PTI
[  103.623424] CPU: 10 PID: 1046 Comm: cat Not tainted 5.0.0-rc3-00130-gd73aba1-dirty #96
[  103.625321] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-2-g628b2e6-dirty-20190104_103505-linux 04/01/2014
[  103.628284] RIP: 0010:process_fetch_insn+0x1ab/0x4b0
[  103.629518] Code: 10 83 80 28 2e 00 00 01 31 d2 31 ff 48 8b 74 24 28 eb 0c 81 fa ff 0f 00 00 7f 1c 85 c0 75 18 66 66 90 0f ae e8 48 63
 ca 89 f8 <8a> 0c 31 66 66 90 83 c2 01 84 c9 75 dc 89 54 24 34 89 44 24 28 48
[  103.634032] RSP: 0018:ffff88845eb37ce0 EFLAGS: 00010246
[  103.635312] RAX: 0000000000000000 RBX: ffff888456c4e5a8 RCX: 0000000000000000
[  103.637057] RDX: 0000000000000000 RSI: 2e646c2f6374652f RDI: 0000000000000000
[  103.638795] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[  103.640556] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[  103.642297] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[  103.644040] FS:  0000000000000000(0000) GS:ffff88846f000000(0000) knlGS:0000000000000000
[  103.646019] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  103.647436] CR2: 00007ffc79758038 CR3: 0000000463360006 CR4: 0000000000020ee0
[  103.649147] Call Trace:
[  103.649781]  ? sched_clock_cpu+0xc/0xa0
[  103.650747]  ? do_sys_open+0x5/0x220
[  103.651635]  kprobe_trace_func+0x303/0x380
[  103.652645]  ? do_sys_open+0x5/0x220
[  103.653528]  kprobe_dispatcher+0x45/0x50
[  103.654682]  ? do_sys_open+0x1/0x220
[  103.655875]  kprobe_ftrace_handler+0x90/0xf0
[  103.657282]  ftrace_ops_assist_func+0x54/0xf0
[  103.658564]  ? __call_rcu+0x1dc/0x280
[  103.659482]  0xffffffffc00000bf
[  103.660384]  ? __ia32_sys_open+0x20/0x20
[  103.661682]  ? do_sys_open+0x1/0x220
[  103.662863]  do_sys_open+0x5/0x220
[  103.663988]  do_syscall_64+0x60/0x210
[  103.665201]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  103.666862] RIP: 0033:0x7fc22fadccdd
[  103.668034] Code: 48 89 54 24 e0 41 83 e2 40 75 32 89 f0 25 00 00 41 00 3d 00 00 41 00 74 24 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff
 ff 0f 05 <48> 3d 00 f0 ff ff 77 33 f3 c3 66 0f 1f 84 00 00 00 00 00 48 8d 44
[  103.674029] RSP: 002b:00007ffc7972c3a8 EFLAGS: 00000287 ORIG_RAX: 0000000000000101
[  103.676512] RAX: ffffffffffffffda RBX: 0000562f86147a21 RCX: 00007fc22fadccdd
[  103.678853] RDX: 0000000000080000 RSI: 00007fc22fae1428 RDI: 00000000ffffff9c
[  103.681151] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[  103.683489] R10: 0000000000000000 R11: 0000000000000287 R12: 00007fc22fce90a8
[  103.685774] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
[  103.688056] Modules linked in:
[  103.689131] ---[ end trace 43792035c28984a1 ]---

This can be fixed by using probe_mem_read() instead, as it can handle faulting
kernel memory addresses, which kprobes can legitimately do.

Link: http://lkml.kernel.org/r/20190125151051.7381-1-changbin.du@gmail.com

Cc: stable@vger.kernel.org
Fixes: 9da3f2b7405 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>