Pull tracing fix from Steven Rostedt:
 "A regression showed up that there's a large delay when enabling all
  events.  This was prevalent when FTRACE_SELFTEST was enabled which
  enables all events several times, and caused the system bootup to
  pause for over a minute.

  This was tracked down to an addition of a synchronize_sched()
  performed when system call tracepoints are unregistered.

  The synchronize_sched() is needed between the unregistering of the
  system call tracepoint and a deletion of a tracing instance buffer.
  But placing the synchronize_sched() in the unreg of *every* system
  call tracepoint is a bit overboard.  A single synchronize_sched()
  before the deletion of the instance is sufficient"

* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Only run synchronize_sched() at instance deletion time

It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.

This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.

The synchornize_sched() was added with d562aff93bfb53 "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).

The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.

Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.

Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home

Reported-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull timer fixes from Thomas Gleixner:

 - timekeeping: Cure a subtle drift issue on GENERIC_TIME_VSYSCALL_OLD

 - nohz: Make CONFIG_NO_HZ=n and nohz=off command line option behave the
   same way.  Fixes a long standing load accounting wreckage.

 - clocksource/ARM: Kconfig update to avoid ARM=n wreckage

 - clocksource/ARM: Fixlets for the AT91 and SH clocksource/clockevents

 - Trivial documentation update and kzalloc conversion from akpms pile

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off
  time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLD
  clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARM
  clocksource: sh_tmu: Add clk_prepare/unprepare support
  clocksource: sh_tmu: Release clock when sh_tmu_register() fails
  clocksource: sh_mtu2: Add clk_prepare/unprepare support
  clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
  ARM: at91: rm9200: switch back to clockevents_config_and_register
  tick: Document tick_do_timer_cpu
  timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
  NOHZ: Check for nohz active instead of nohz enabled

Pull irq fixes from Thomas Gleixner:
 - Correction of fuzzy and fragile IRQ_RETVAL macro
 - IRQ related resume fix affecting only XEN
 - ARM/GIC fix for chained GIC controllers

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Gic: fix boot for chained gics
  irq: Enable all irqs unconditionally in irq_resume
  genirq: Correct fuzzy and fragile IRQ_RETVAL() definition

Pull scheduler fixes from Ingo Molnar:
 "Various smaller fixlets, all over the place"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/doc: Fix generation of device-drivers
  sched: Expose preempt_schedule_irq()
  sched: Fix a trivial typo in comments
  sched: Remove unused variable in 'struct sched_domain'
  sched: Avoid NULL dereference on sd_busy
  sched: Check sched_domain before computing group power
  MAINTAINERS: Update file patterns in the lockdep and scheduler entries

Pull perf fixes from Ingo Molnar:
 "Misc kernel and tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools lib traceevent: Fix conversion of pointer to integer of different size
  perf/trace: Properly use u64 to hold event_id
  perf: Remove fragile swevent hlist optimization
  ftrace, perf: Avoid infinite event generation loop
  tools lib traceevent: Fix use of multiple options in processing field
  perf header: Fix possible memory leaks in process_group_desc()
  perf header: Fix bogus group name
  perf tools: Tag thread comm as overriden

Pull workqueue fixes from Tejun Heo:
 "This contains one important fix.  The NUMA support added a while back
  broke ordering guarantees on ordered workqueues.  It was enforced by
  having single frontend interface with @max_active == 1 but the NUMA
  support puts multiple interfaces on unbound workqueues on NUMA
  machines thus breaking the ordered guarantee.  This is fixed by
  disabling NUMA support on ordered workqueues.

  The above and a couple other patches were sitting in for-3.12-fixes
  but I forgot to push that out, so they ended up waiting a bit too
  long.  My aplogies.

  Other fixes are minor"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues
  workqueue: fix comment typo for __queue_work()
  workqueue: fix ordered workqueues in NUMA setups
  workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITY

Pull cgroup fixes from Tejun Heo:
 "Fixes for three issues.

   - cgroup destruction path could swamp system_wq possibly leading to
     deadlock.  This actually seems to happen in the wild with memcg
     because memcg destruction path adds nested dependency on system_wq.

     Resolved by isolating cgroup destruction work items on its
     dedicated workqueue.

   - Possible locking context deadlock through seqcount reported by
     lockdep

   - Memory leak under certain conditions"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix cgroup_subsys_state leak for seq_files
  cpuset: Fix memory allocator deadlock
  cgroup: use a dedicated workqueue for cgroup destruction

If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ.

If CONFIG_NO_HZ=y and the nohz functionality is disabled via the
command line option "nohz=off" or not enabled due to missing hardware
support, then tick_nohz_get_sleep_length() returns 0. That happens
because ts->sleep_length is never set in that case.

Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive.

Reported-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

The init_kernel_text() and core_kernel_text() functions should not
include the labels _einittext and _etext when checking if an address is
inside the .text or .init sections.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>