Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf and wireless.

  Nothing scary here. Feels like the first wave of regressions from v6.5
  is addressed - one outstanding fix still to come in TLS for the
  sendpage rework.

  Current release - regressions:

   - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES

   - dsa: fix older DSA drivers using phylink

  Previous releases - regressions:

   - gro: fix misuse of CB in udp socket lookup

   - mlx5: unregister devlink params in case interface is down

   - Revert "wifi: ath11k: Enable threaded NAPI"

  Previous releases - always broken:

   - sched: cls_u32: fix match key mis-addressing

   - sched: bind logic fixes for cls_fw, cls_u32 and cls_route

   - add bound checks to a number of places which hand-parse netlink

   - bpf: disable preemption in perf_event_output helpers code

   - qed: fix scheduling in a tasklet while getting stats

   - avoid using APIs which are not hardirq-safe in couple of drivers,
     when we may be in a hard IRQ (netconsole)

   - wifi: cfg80211: fix return value in scan logic, avoid page
     allocator warning

   - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
     (DBDC)

  Misc:

   - drop handful of inactive maintainers, put some new in place"

* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
  MAINTAINERS: update TUN/TAP maintainers
  test/vsock: remove vsock_perf executable on `make clean`
  tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
  tcp_metrics: annotate data-races around tm->tcpm_net
  tcp_metrics: annotate data-races around tm->tcpm_vals[]
  tcp_metrics: annotate data-races around tm->tcpm_lock
  tcp_metrics: annotate data-races around tm->tcpm_stamp
  tcp_metrics: fix addr_same() helper
  prestera: fix fallback to previous version on same major version
  udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
  net/mlx5e: Set proper IPsec source port in L4 selector
  net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
  net/mlx5: fs_core: Make find_closest_ft more generic
  wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
  vxlan: Fix nexthop hash size
  ip6mr: Fix skb_under_panic in ip6mr_cache_report()
  s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
  net: tap_open(): set sk_uid from current_fsuid()
  net: tun_chr_open(): set sk_uid from current_fsuid()
  net: dcb: choose correct policy to parse DCB_ATTR_BCN
  ...

Martin KaFai Lau says:

====================
pull-request: bpf 2023-08-03

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 3 files changed, 37 insertions(+), 20 deletions(-).

The main changes are:

1) Disable preemption in perf_event_output helpers code,
   from Jiri Olsa

2) Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing,
   from Lin Ma

3) Multiple warning splat fixes in cpumap from Hou Tao

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, cpumap: Handle skb as well when clean up ptr_ring
  bpf, cpumap: Make sure kthread is running before map update returns
  bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing
  bpf: Disable preemption in bpf_event_output
  bpf: Disable preemption in bpf_perf_event_output
====================

Link: https://lore.kernel.org/r/20230803181429.994607-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull probe fixes from Masami Hiramatsu:

 - probe-events: add NULL check for some BTF API calls which can return
   error code and NULL.

 - ftrace selftests: check fprobe and kprobe event correctly. This fixes
   a miss condition of the test command.

 - kprobes: do not allow probing functions that start with "__cfi_" or
   "__pfx_" since those are auto generated for kernel CFI and not
   executed.

* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: Prohibit probing on CFI preamble symbol
  selftests/ftrace: Fix to check fprobe event eneblement
  tracing/probes: Fix to add NULL check for BTF APIs

Warning happened in trace_buffered_event_disable() at
  WARN_ON_ONCE(!trace_buffered_event_ref)

  Call Trace:
   ? __warn+0xa5/0x1b0
   ? trace_buffered_event_disable+0x189/0x1b0
   __ftrace_event_enable_disable+0x19e/0x3e0
   free_probe_data+0x3b/0xa0
   unregister_ftrace_function_probe_func+0x6b8/0x800
   event_enable_func+0x2f0/0x3d0
   ftrace_process_regex.isra.0+0x12d/0x1b0
   ftrace_filter_write+0xe6/0x140
   vfs_write+0x1c9/0x6f0
   [...]

The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
 ```
 #!/bin/bash

 cd /sys/kernel/tracing/

 # 1. Register a 'disable_event' command, then:
 #    1) SOFT_DISABLED_BIT was set;
 #    2) trace_buffered_event_enable() was called first time;
 echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
     set_ftrace_filter

 # 2. Enable the event registered, then:
 #    1) SOFT_DISABLED_BIT was cleared;
 #    2) trace_buffered_event_disable() was called first time;
 echo 1 > events/initcall/initcall_finish/enable

 # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
 #    set again!!!
 cat /proc/cmdline

 # 4. Unregister the 'disable_event' command, then:
 #    1) SOFT_DISABLED_BIT was cleared again;
 #    2) trace_buffered_event_disable() was called second time!!!
 echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
     set_ftrace_filter
 ```

To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled.

Link: https://lore.kernel.org/linux-trace-kernel/20230726095804.920457-1-zhengyejian1@huawei.com

Cc: <mhiramat@kernel.org>
Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix kernel-doc warning:

kernel/trace/trace_seq.c:142: warning: Function parameter or member
'args' not described in 'trace_seq_vprintf'

Link: https://lkml.kernel.org/r/20230724140827.1023266-5-cuigaosheng1@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix kernel-doc warnings:

kernel/trace/trace_events_trigger.c:59: warning: Function parameter
or member 'buffer' not described in 'event_triggers_call'
kernel/trace/trace_events_trigger.c:59: warning: Function parameter
or member 'event' not described in 'event_triggers_call'

Link: https://lkml.kernel.org/r/20230724140827.1023266-4-cuigaosheng1@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix kernel-doc warning:

kernel/trace/trace_events_synth.c:1257: warning: Function parameter
or member 'mod' not described in 'synth_event_gen_cmd_array_start'

Link: https://lkml.kernel.org/r/20230724140827.1023266-3-cuigaosheng1@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix kernel-doc warnings:

kernel/trace/ring_buffer.c:954: warning: Function parameter or
member 'cpu' not described in 'ring_buffer_wake_waiters'
kernel/trace/ring_buffer.c:3383: warning: Excess function parameter
'event' description in 'ring_buffer_unlock_commit'
kernel/trace/ring_buffer.c:5359: warning: Excess function parameter
'cpu' description in 'ring_buffer_reset_online_cpus'

Link: https://lkml.kernel.org/r/20230724140827.1023266-2-cuigaosheng1@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set
to 0 in order to make sure any read iterators reset themselves. However,
this will mess 'entries' stating, see following steps:

  # cd /sys/kernel/tracing/
  # 1. Enlarge ring buffer prepare for later reducing:
  # echo 20 > per_cpu/cpu0/buffer_size_kb
  # 2. Write a log into ring buffer of cpu0:
  # taskset -c 0 echo "hello1" > trace_marker
  # 3. Read the log:
  # cat per_cpu/cpu0/trace_pipe
       <...>-332     [000] .....    62.406844: tracing_mark_write: hello1
  # 4. Stop reading and see the stats, now 0 entries, and 1 event readed:
  # cat per_cpu/cpu0/stats
   entries: 0
   [...]
   read events: 1
  # 5. Reduce the ring buffer
  # echo 7 > per_cpu/cpu0/buffer_size_kb
  # 6. Now entries became unexpected 1 because actually no entries!!!
  # cat per_cpu/cpu0/stats
   entries: 1
   [...]
   read events: 0

To fix it, introduce 'page_removed' field to count total removed pages
since last reset, then use it to let read iterators reset themselves
instead of changing the 'read' pointer.

Link: https://lore.kernel.org/linux-trace-kernel/20230724054040.3489499-1-zhengyejian1@huawei.com

Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Fixes: 83f40318dab0 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since find_btf_func_param() abd btf_type_by_id() can return NULL,
the caller must check the return value correctly.

Link: https://lore.kernel.org/all/169024903951.395371.11361556840733470934.stgit@devnote2/

Fixes: b576e09701c7 ("tracing/probes: Support function parameters if BTF is available")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>