Pull tracing updates from Steven Rostedt:
 "The major update to this release is that there's a new arch config
  option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS.

  Currently, only x86_64 enables it. All the ftrace callbacks now take a
  struct ftrace_regs instead of a struct pt_regs. If the architecture
  has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will
  have enough information to read the arguments of the function being
  traced, as well as access to the stack pointer.

  This way, if a user (like live kernel patching) only cares about the
  arguments, then it can avoid using the heavier weight "regs" callback,
  that puts in enough information in the struct ftrace_regs to simulate
  a breakpoint exception (needed for kprobes).

  A new config option that audits the timestamps of the ftrace ring
  buffer at most every event recorded.

  Ftrace recursion protection has been cleaned up to move the protection
  to the callback itself (this saves on an extra function call for those
  callbacks).

  Perf now handles its own RCU protection and does not depend on ftrace
  to do it for it (saving on that extra function call).

  New debug option to add "recursed_functions" file to tracefs that
  lists all the places that triggered the recursion protection of the
  function tracer. This will show where things need to be fixed as
  recursion slows down the function tracer.

  The eval enum mapping updates done at boot up are now offloaded to a
  work queue, as it caused a noticeable pause on slow embedded boards.

  Various clean ups and last minute fixes"

* tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  tracing: Offload eval map updates to a work queue
  Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"
  ring-buffer: Add rb_check_bpage in __rb_allocate_pages
  ring-buffer: Fix two typos in comments
  tracing: Drop unneeded assignment in ring_buffer_resize()
  tracing: Disable ftrace selftests when any tracer is running
  seq_buf: Avoid type mismatch for seq_buf_init
  ring-buffer: Fix a typo in function description
  ring-buffer: Remove obsolete rb_event_is_commit()
  ring-buffer: Add test to validate the time stamp deltas
  ftrace/documentation: Fix RST C code blocks
  tracing: Clean up after filter logic rewriting
  tracing: Remove the useless value assignment in test_create_synth_event()
  livepatch: Use the default ftrace_ops instead of REGS when ARGS is available
  ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
  ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs
  MAINTAINERS: assign ./fs/tracefs to TRACING
  tracing: Fix some typos in comments
  ftrace: Remove unused varible 'ret'
  ring-buffer: Add recording of ring buffer recursion into recursed_functions
  ...

Pull block updates from Jens Axboe:
 "Another series of killing more code than what is being added, again
  thanks to Christoph's relentless cleanups and tech debt tackling.

  This contains:

   - blk-iocost improvements (Baolin Wang)

   - part0 iostat fix (Jeffle Xu)

   - Disable iopoll for split bios (Jeffle Xu)

   - block tracepoint cleanups (Christoph Hellwig)

   - Merging of struct block_device and hd_struct (Christoph Hellwig)

   - Rework/cleanup of how block device sizes are updated (Christoph
     Hellwig)

   - Simplification of gendisk lookup and removal of block device
     aliasing (Christoph Hellwig)

   - Block device ioctl cleanups (Christoph Hellwig)

   - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)

   - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)

   - sbitmap improvements (Pavel Begunkov)

   - Hybrid polling fix (Pavel Begunkov)

   - bvec iteration improvements (Pavel Begunkov)

   - Zone revalidation fixes (Damien Le Moal)

   - blk-throttle limit fix (Yu Kuai)

   - Various little fixes"

* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
  blk-mq: fix msec comment from micro to milli seconds
  blk-mq: update arg in comment of blk_mq_map_queue
  blk-mq: add helper allocating tagset->tags
  Revert "block: Fix a lockdep complaint triggered by request queue flushing"
  nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
  blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
  block: disable iopoll for split bio
  block: Improve blk_revalidate_disk_zones() checks
  sbitmap: simplify wrap check
  sbitmap: replace CAS with atomic and
  sbitmap: remove swap_lock
  sbitmap: optimise sbitmap_deferred_clear()
  blk-mq: skip hybrid polling if iopoll doesn't spin
  blk-iocost: Factor out the base vrate change into a separate function
  blk-iocost: Factor out the active iocgs' state check into a separate function
  blk-iocost: Move the usage ratio calculation to the correct place
  blk-iocost: Remove unnecessary advance declaration
  blk-iocost: Fix some typos in comments
  blktrace: fix up a kerneldoc comment
  block: remove the request_queue to argument request based tracepoints
  ...

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
 "This cleans up two ancient timer features that were never completed in
  the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.

  There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
  of clocksource implementations, the ARM EBSA110 platform. Rather than
  changing to use modern timekeeping, we remove the platform entirely as
  Russell no longer uses his machine and nobody else seems to have one
  any more.

  The conditional code for using arch_gettimeoffset() is removed as a
  result.

  For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
  not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
  platform. These all do timer ticks slighly differently, and this gets
  cleaned up to the point they at least all call the same helper
  function.

  Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
  Kconfig, the polarity is now reversed, with the few remaining ones
  selecting LEGACY_TIMER_TICK instead"

* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  timekeeping: default GENERIC_CLOCKEVENTS to enabled
  timekeeping: remove xtime_update
  m68k: remove timer_interrupt() function
  m68k: change remaining timers to legacy_timer_tick
  m68k: m68328: use legacy_timer_tick()
  m68k: sun3/sun3c: use legacy_timer_tick
  m68k: split heartbeat out of timer function
  m68k: coldfire: use legacy_timer_tick()
  parisc: use legacy_timer_tick
  ARM: rpc: use legacy_timer_tick
  ia64: convert to legacy_timer_tick
  timekeeping: add CONFIG_LEGACY_TIMER_TICK
  timekeeping: remove arch_gettimeoffset
  net: remove am79c961a driver
  ARM: remove ebsa110 platform

Now that relay_open() accepts const callbacks, make relay callbacks
const.

Link: https://lkml.kernel.org/r/7ff5ce0b735901eb4f10e13da2704f1d8c4a2507.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

In order for tracepoints to export their enums to user space, the use of the
TRACE_DEFINE_ENUM() macro is used. On boot up, the strings shown in the
tracefs "print fmt" lines are processed, and all the enums registered by
TRACE_DEFINE_ENUM are replaced with the interger value. This way, userspace
tools that read the raw binary data, knows how to evaluate the raw events.

This is currently done in an initcall, but it has been noticed that slow
embedded boards that have tracing may take a few seconds to process them
all, and a few seconds slow down on an embedded device is detrimental to the
system.

Instead, offload the work to a work queue and make sure that its finished by
destroying the work queue (which flushes all work) in a late initcall. This
will allow the system to continue to boot and run the updates in the
background, and this speeds up the boot time. Note, the strings being
updated are only used by user space, so finishing the process before the
system is fully booted will prevent any race issues.

Link: https://lore.kernel.org/r/68d7b3327052757d0cd6359a6c9015a85b437232.camel@pengutronix.de

Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull scheduler updates from Thomas Gleixner:

 - migrate_disable/enable() support which originates from the RT tree
   and is now a prerequisite for the new preemptible kmap_local() API
   which aims to replace kmap_atomic().

 - A fair amount of topology and NUMA related improvements

 - Improvements for the frequency invariant calculations

 - Enhanced robustness for the global CPU priority tracking and decision
   making

 - The usual small fixes and enhancements all over the place

* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
  sched/fair: Trivial correction of the newidle_balance() comment
  sched/fair: Clear SMT siblings after determining the core is not idle
  sched: Fix kernel-doc markup
  x86: Print ratio freq_max/freq_base used in frequency invariance calculations
  x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
  x86, sched: Calculate frequency invariance for AMD systems
  irq_work: Optimize irq_work_single()
  smp: Cleanup smp_call_function*()
  irq_work: Cleanup
  sched: Limit the amount of NUMA imbalance that can exist at fork time
  sched/numa: Allow a floating imbalance between NUMA nodes
  sched: Avoid unnecessary calculation of load imbalance at clone time
  sched/numa: Rename nr_running and break out the magic number
  sched: Make migrate_disable/enable() independent of RT
  sched/topology: Condition EAS enablement on FIE support
  arm64: Rebuild sched domains on invariance status changes
  sched/topology,schedutil: Wrap sched domains rebuild
  sched/uclamp: Allow to reset a task uclamp constraint value
  sched/core: Fix typos in comments
  Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
  ...

Pull perf/kprobes updates from Thomas Gleixner:
 "Make kretprobes lockless to avoid the rp->lock performance and
  potential lock ordering issues"

* tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomics: Regenerate the atomics-check SHA1's
  kprobes: Replace rp->free_instance with freelist
  freelist: Implement lockless freelist
  asm-generic/atomic: Add try_cmpxchg() fallbacks
  kprobes: Remove kretprobe hash
  llist: Add nonatomic __llist_add() and __llist_dell_all()

Pull core entry/exit updates from Thomas Gleixner:
 "A set of updates for entry/exit handling:

   - More generalization of entry/exit functionality

   - The consolidation work to reclaim TIF flags on x86 and also for
     non-x86 specific TIF flags which are solely relevant for syscall
     related work and have been moved into their own storage space. The
     x86 specific part had to be merged in to avoid a major conflict.

   - The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
     delivery mode of task work and results in an impressive performance
     improvement for io_uring. The non-x86 consolidation of this is
     going to come seperate via Jens.

   - The selective syscall redirection facility which provides a clean
     and efficient way to support the non-Linux syscalls of WINE by
     catching them at syscall entry and redirecting them to the user
     space emulation. This can be utilized for other purposes as well
     and has been designed carefully to avoid overhead for the regular
     fastpath. This includes the core changes and the x86 support code.

   - Simplification of the context tracking entry/exit handling for the
     users of the generic entry code which guarantee the proper ordering
     and protection.

   - Preparatory changes to make the generic entry code accomodate S390
     specific requirements which are mostly related to their syscall
     restart mechanism"

* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  entry: Add syscall_exit_to_user_mode_work()
  entry: Add exit_to_user_mode() wrapper
  entry_Add_enter_from_user_mode_wrapper
  entry: Rename exit_to_user_mode()
  entry: Rename enter_from_user_mode()
  docs: Document Syscall User Dispatch
  selftests: Add benchmark for syscall user dispatch
  selftests: Add kselftest for syscall user dispatch
  entry: Support Syscall User Dispatch on common syscall entry
  kernel: Implement selective syscall userspace redirection
  signal: Expose SYS_USER_DISPATCH si_code type
  x86: vdso: Expose sigreturn address on vdso to the kernel
  MAINTAINERS: Add entry for common entry code
  entry: Fix boot for !CONFIG_GENERIC_ENTRY
  x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
  context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
  sched: Detect call to schedule from critical entry code
  context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
  context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
  x86: Reclaim unused x86 TI flags
  ...

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-12-14

1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.

2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.

3) Support for finding BTF based kernel attach targets through libbpf's
   bpf_program__set_attach_target() API, from Andrii Nakryiko.

4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.

5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.

6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.

7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.

8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.

9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
   KP Singh, Jiri Olsa and various others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
  selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
  bpf: Permits pointers on stack for helper calls
  libbpf: Expose libbpf ring_buffer epoll_fd
  selftests/bpf: Add set_attach_target() API selftest for module target
  libbpf: Support modules in bpf_program__set_attach_target() API
  selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
  selftests/bpf: Drop the need for LLVM's llc
  selftests/bpf: fix bpf_testmod.ko recompilation logic
  samples/bpf: Fix possible hang in xdpsock with multiple threads
  selftests/bpf: Make selftest compilation work on clang 11
  selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
  selftests/bpf: Drop tcp-{client,server}.py from Makefile
  selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
  selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
  selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
  selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
  selftests/bpf: Xsk selftests framework
  bpf: Only provide bpf_sock_from_file with CONFIG_NET
  bpf: Return -ENOTSUPP when attaching to non-kernel BTF
  xsk: Validate socket state in xsk_recvmsg, prior touching socket members
  ...
====================

Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>