Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
Currently, print_function_args() prints enum parameter values in decimal format, reducing trace log readability. Use BTF information to resolve enum parameters and print their symbolic names (where available). This improves readability by showing meaningful identifiers instead of raw numbers. Before: mod_memcg_lruvec_state(lruvec=0xffff..., idx=5, val=320) After: mod_memcg_lruvec_state(lruvec=0xffff..., idx=5 [NR_SLAB_RECLAIMABLE_B], val=320) Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Link: https://patch.msgid.link/20260209071949.4040193-1-dolinux.peng@gmail.com Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The sentinel value added by the wrapper macros __print_symbolic() et al prevents the callers from adding their own trailing comma. This makes constructing symbol list dynamically based on kconfig values tedious. Drop the sentinel elements, so callers can either specify the trailing comma or not, just like in regular array initializers. Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260311-hrtimer-cleanups-v1-2-095357392669@linutronix.de
Add support for displaying bitmasks in human-readable list format (e.g., 0,2-5,7) in addition to the default hexadecimal bitmap representation. This is particularly useful when tracing CPU masks and other large bitmasks where individual bit positions are more meaningful than their hexadecimal encoding. When the "bitmask-list" option is enabled, the printk "%*pbl" format specifier is used to render bitmasks as comma-separated ranges, making trace output easier to interpret for complex CPU configurations and large bitmask values. Link: https://patch.msgid.link/20251226160724.2246493-2-atomlin@atomlin.com Signed-off-by: Aaron Tomlin <atomlin@atomlin.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull tracing updates from Steven Rostedt:
- Extend tracing option mask to 64 bits
The trace options were defined by a 32 bit variable. This limits the
tracing instances to have a total of 32 different options. As that
limit has been hit, and more options are being added, increase the
option mask to a 64 bit number, doubling the number of options
available.
As this is required for the kprobe topic branches as well as the
tracing topic branch, a separate branch was created and merged into
both.
- Make trace_user_fault_read() available for the rest of tracing
The function trace_user_fault_read() is used by trace_marker file
read to allow reading user space to be done fast and without locking
or allocations. Make this available so that the system call trace
events can use it too.
- Have system call trace events read user space values
Now that the system call trace events callbacks are called in a
faultable context, take advantage of this and read the user space
buffers for various system calls. For example, show the path name of
the openat system call instead of just showing the pointer to that
path name in user space. Also show the contents of the buffer of the
write system call. Several system call trace events are updated to
make tracing into a light weight strace tool for all applications in
the system.
- Update perf system call tracing to do the same
- And a config and syscall_user_buf_size file to control the size of
the buffer
Limit the amount of data that can be read from user space. The
default size is 63 bytes but that can be expanded to 165 bytes.
- Allow the persistent ring buffer to print system calls normally
The persistent ring buffer prints trace events by their type and
ignores the print_fmt. This is because the print_fmt may change from
kernel to kernel. As the system call output is fixed by the system
call ABI itself, there's no reason to limit that. This makes reading
the system call events in the persistent ring buffer much nicer and
easier to understand.
- Add options to show text offset to function profiler
The function profiler that counts the number of times a function is
hit currently lists all functions by its name and offset. But this
becomes ambiguous when there are several functions with the same
name.
Add a tracing option that changes the output to be that of
'_text+offset' instead. Now a user space tool can use this
information to map the '_text+offset' to the unique function it is
counting.
- Report bad dynamic event command
If a bad command is passed to the dynamic_events file, report it
properly in the error log.
- Clean up tracer options
Clean up the tracer option code a bit, by removing some useless code
and also using switch statements instead of a series of if
statements.
- Have tracing options be instance specific
Tracers can have their own options (function tracer, irqsoff tracer,
function graph tracer, etc). But now that the same tracer can be
enabled in multiple trace instances, their options are still global.
The API is per instance, thus changing one affects other instances.
This isn't even consistent, as the option take affect differently
depending on when an tracer started in an instance. Make the options
for instances only affect the instance it is changed under.
- Optimize pid_list lock contention
Whenever the pid_list is read, it uses a spin lock. This happens at
every sched switch. Taking the lock at sched switch can be removed by
instead using a seqlock counter.
- Clean up the trace trigger structures
The trigger code uses two different structures to implement a single
tigger. This was due to trying to reuse code for the two different
types of triggers (always on trigger, and count limited trigger). But
by adding a single field to one structure, the other structure could
be absorbed into the first structure making he code easier to
understand.
- Create a bulk garbage collector for trace triggers
If user space has triggers for several hundreds of events and then
removes them, it can take several seconds to complete. This is
because each removal calls tracepoint_synchronize_unregister() that
can take hundreds of milliseconds to complete.
Instead, create a helper thread that will do the clean up. When a
trigger is removed, it will create the kthread if it isn't already
created, and then add the trigger to a llist. The kthread will take
the items off the llist, call tracepoint_synchronize_unregister(),
and then remove the items it took off. It will then check if there's
more items to free before sleeping.
This makes user space removing all these triggers to finish in less
than a second.
- Allow function tracing of some of the tracing infrastructure code
Because the tracing code can cause recursion issues if it is traced
by the function tracer the entire tracing directory disables function
tracing. But not all of tracing causes issues if it is traced.
Namely, the event tracing code. Add a config that enables some of the
tracing code to be traced to help in debugging it. Note, when this is
enabled, it does add noise to general function tracing, especially if
events are enabled as well (which is a common case).
- Add boot-time backup instance for persistent buffer
The persistent ring buffer is used mostly for kernel crash analysis
in the field. One issue is that if there's a crash, the data in the
persistent ring buffer must be read before tracing can begin using
it. This slows down the boot process. Once tracing starts in the
persistent ring buffer, the old data must be freed and the addresses
no longer match and old events can't be in the buffer with new
events.
Create a way to create a backup buffer that copies the persistent
ring buffer at boot up. Then after a crash, the always on tracer can
begin immediately as well as the normal boot process while the crash
analysis tooling uses the backup buffer. After the backup buffer is
finished being read, it can be removed.
- Enable function graph args and return address options at the same
time
Currently the when reading of arguments in the function graph tracer
is enabled, the option to record the parent function in the entry
event can not be enabled. Update the code so that it can.
- Add new struct_offset() helper macro
Add a new macro that takes a pointer to a structure and a name of one
of its members and it will return the offset of that member. This
allows the ring buffer code to simplify the following:
From: size = struct_size(entry, buf, cnt - sizeof(entry->id));
To: size = struct_offset(entry, id) + cnt;
There should be other simplifications that this macro can help out
with as well
* tag 'trace-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (42 commits)
overflow: Introduce struct_offset() to get offset of member
function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously
tracing: Add boot-time backup of persistent ring buffer
ftrace: Allow tracing of some of the tracing code
tracing: Use strim() in trigger_process_regex() instead of skip_spaces()
tracing: Add bulk garbage collection of freeing event_trigger_data
tracing: Remove unneeded event_mutex lock in event_trigger_regex_release()
tracing: Merge struct event_trigger_ops into struct event_command
tracing: Remove get_trigger_ops() and add count_func() from trigger ops
tracing: Show the tracer options in boot-time created instance
ftrace: Avoid redundant initialization in register_ftrace_direct
tracing: Remove unused variable in tracing_trace_options_show()
fgraph: Make fgraph_no_sleep_time signed
tracing: Convert function graph set_flags() to use a switch() statement
tracing: Have function graph tracer option sleep-time be per instance
tracing: Move graph-time out of function graph options
tracing: Have function graph tracer option funcgraph-irqs be per instance
trace/pid_list: optimize pid_list->lock contention
tracing: Have function graph tracer define options per instance
tracing: Have function tracer define options per instance
...
Use %ptSp instead of open coded variants to print content of struct timespec64 in human readable format. Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251113150217.3030010-22-andriy.shevchenko@linux.intel.com Signed-off-by: Petr Mladek <pmladek@suse.com>
Updates to the function profiler adds new options to tracefs. The options are currently defined by an enum as flags. The added options brings the number of options over 32, which means they can no longer be held in a 32 bit enum. The TRACE_ITER_* flags are converted to a macro TRACE_ITER(*) to allow the creation of options to still be done by macros. This change is intrusive, as it affects all TRACE_ITER* options throughout the trace code. Merge the branch that added these options and converted the TRACE_ITER_* enum into a TRACE_ITER(*) macro, to allow the topic branches to still be developed without conflict. Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since enum trace_iterator_flags is 32bit, the max number of the option flags is limited to 32 and it is fully used now. To add a new option, we need to expand it. So replace the TRACE_ITER_##flag with TRACE_ITER(flag) macro which is 64bit bitmask. Link: https://lore.kernel.org/all/176187877103.994619.166076000668757232.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When the "fields" option is enabled, it prints each trace event field based on its type. But a dynamic array and a dynamic string can both have a "char *" type. Printing it as a string can cause escape characters to be printed and mess up the output of the trace. For dynamic strings, test if there are any non-printable characters, and if so, print both the string with the non printable characters as '.', and the print the hex value of the array. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Takaya Saeki <takayas@google.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ian Rogers <irogers@google.com> Cc: Douglas Raillard <douglas.raillard@arm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/20251028231148.929243047@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Most function arguments that are passed in as unsigned int or unsigned
long are better displayed as hexadecimal than normal integer. For example,
the functions:
static void __create_object(unsigned long ptr, size_t size,
int min_count, gfp_t gfp, unsigned int objflags);
static bool stack_access_ok(struct unwind_state *state, unsigned long _addr,
size_t len);
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
Show up in the trace as:
__create_object(ptr=-131387050520576, size=4096, min_count=1, gfp=3264, objflags=0) <-kmem_cache_alloc_noprof
stack_access_ok(state=0xffffc9000233fc98, _addr=-60473102566256, len=8) <-unwind_next_frame
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
Instead, by displaying unsigned as hexadecimal, they look more like this:
__create_object(ptr=0xffff8881028d2080, size=0x280, min_count=1, gfp=0x82820, objflags=0x0) <-kmem_cache_alloc_node_noprof
stack_access_ok(state=0xffffc90000003938, _addr=0xffffc90000003930, len=0x8) <-unwind_next_frame
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs
Which is much easier to understand as most unsigned longs are usually just
pointers. Even the "unsigned int cnt" in __local_bh_disable_ip() looks
better as hexadecimal as a lot of flags are passed as unsigned.
Changes since v2: https://lore.kernel.org/20250801111453.01502861@gandalf.local.home
- Use btf_int_encoding() instead of open coding it (Martin KaFai Lau)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/20250801165601.7770d65c@gandalf.local.home
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>