Pull tracing updates from Steven Rostedt:

 - Fix printf format warning for bprintf

   sunrpc uses a trace_printk() that triggers a printf warning during
   the compile. Move the __printf() attribute around for when debugging
   is not enabled the warning will go away

 - Remove redundant check for EVENT_FILE_FL_FREED in
   event_filter_write()

   The FREED flag is checked in the call to event_file_file() and then
   checked again right afterward, which is unneeded

 - Clean up event_file_file() and event_file_data() helpers

   These helper functions played a different role in the past, but now
   with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
   and also add a warning to event_file_data() if the file or its data
   is not present

 - Remove updating file->private_data in tracing open

   All access to the file private data is handled by the helper
   functions, which do not use file->private_data. Stop updating it on
   open

 - Show ENUM names in function arguments via BTF in function tracing

   When showing the function arguments when func-args option is set for
   function tracing, if one of the arguments is found to be an enum,
   show the name of the enum instead of its number

 - Add new trace_call__##name() API for tracepoints

   Tracepoints are enabled via static_branch() blocks, where when not
   enabled, there's only a nop that is in the code where the execution
   will just skip over it. When tracing is enabled, the nop is converted
   to a direct jump to the tracepoint code. Sometimes more calculations
   are required to be performed to update the parameters of the
   tracepoint. In this case, trace_##name##_enabled() is called which is
   a static_branch() that gets enabled only when the tracepoint is
   enabled. This allows the extra calculations to also be skipped by the
   nop:

	if (trace_foo_enabled()) {
		x = bar();
		trace_foo(x);
	}

   Where the x=bar() is only performed when foo is enabled. The problem
   with this approach is that there's now two static_branch() calls. One
   for checking if the tracepoint is enabled, and then again to know if
   the tracepoint should be called. The second one is redundant

   Introduce trace_call__foo() that will call the foo() tracepoint
   directly without doing a static_branch():

	if (trace_foo_enabled()) {
		x = bar();
		trace_call__foo();
	}

 - Update various locations to use the new trace_call__##name() API

 - Move snapshot code out of trace.c

   Cleaning up trace.c to not be a "dump all", move the snapshot code
   out of it and into a new trace_snapshot.c file

 - Clean up some "%*.s" to "%*s"

 - Allow boot kernel command line options to be called multiple times

   Have options like:

	ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo

   Equal to:

	ftrace_filter=foo,bar,zoo

 - Fix ipi_raise event CPU field to be a CPU field

   The ipi_raise target_cpus field is defined as a __bitmask(). There is
   now a __cpumask() field definition. Update the field to use that

 - Have hist_field_name() use a snprintf() and not a series of strcat()

   It's safer to use snprintf() that a series of strcat()

 - Fix tracepoint regfunc balancing

   A tracepoint can define a "reg" and "unreg" function that gets called
   before the tracepoint is enabled, and after it is disabled
   respectively. But on error, after the "reg" func is called and the
   tracepoint is not enabled, the "unreg" function is not called to tear
   down what the "reg" function performed

 - Fix output that shows what histograms are enabled

   Event variables are displayed incorrectly in the histogram output

   Instead of "sched.sched_wakeup.$var", it is showing
   "$sched.sched_wakeup.var" where the '$' is in the incorrect location

 - Some other simple cleanups

* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
  selftests/ftrace: Add test case for fully-qualified variable references
  tracing: Fix fully-qualified variable reference printing in histograms
  tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
  tracing: Rebuild full_name on each hist_field_name() call
  tracing: Report ipi_raise target CPUs as cpumask
  tracing: Remove duplicate latency_fsnotify() stub
  tracing: Preserve repeated trace_trigger boot parameters
  tracing: Append repeated boot-time tracing parameters
  tracing: Remove spurious default precision from show_event_trigger/filter formats
  cpufreq: Use trace_call__##name() at guarded tracepoint call sites
  tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
  tracing: Move snapshot code out of trace.c and into trace_snapshot.c
  mm: damon: Use trace_call__##name() at guarded tracepoint call sites
  btrfs: Use trace_call__##name() at guarded tracepoint call sites
  spi: Use trace_call__##name() at guarded tracepoint call sites
  i2c: Use trace_call__##name() at guarded tracepoint call sites
  kernel: Use trace_call__##name() at guarded tracepoint call sites
  tracepoint: Add trace_call__##name() API
  tracing: trace_mmap.h: fix a kernel-doc warning
  tracing: Pretty-print enum parameters in function arguments
  ...

When an unqualified kprobe target exists in both vmlinux and a loaded
module, number_of_same_symbols() returns a count greater than 1,
causing kprobe attachment to fail with -EADDRNOTAVAIL even though the
vmlinux symbol is unambiguous.

When no module qualifier is given and the symbol is found in vmlinux,
return the vmlinux-only count without scanning loaded modules. This
preserves the existing behavior for all other cases:
- Symbol only in a module: vmlinux count is 0, falls through to module
  scan as before.
- Symbol qualified with MOD:SYM: mod != NULL, unchanged path.
- Symbol ambiguous within vmlinux itself: count > 1 is returned as-is.

Fixes: 926fe783c8a6 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well")
Fixes: 9d8616034f16 ("tracing/kprobes: Add symbol counting check when module loads")
Suggested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Link: https://lore.kernel.org/r/20260407203912.1787502-2-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Some tracing boot parameters already accept delimited value lists, but
their __setup() handlers keep only the last instance seen at boot.
Make repeated instances append to the same boot-time buffer in the
format each parser already consumes.

Use a shared trace_append_boot_param() helper for the ftrace filters,
trace_options, and kprobe_event boot parameters.

This also lets Bootconfig array values work naturally when they expand
to repeated param=value entries.

Before this change, only the last instance from each repeated
parameter survived boot.

Link: https://patch.msgid.link/20260330181103.1851230-1-atwellwea@gmail.com
Signed-off-by: Wesley Atwell <atwellwea@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.

As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>

Pull kprobes updates from Masami Hiramatsu:

 - Use a dedicated kernel thread to optimize the kprobes instead of
   using workqueue thread. Since the kprobe optimizer waits a long time
   for synchronize_rcu_task(), it can block other workers in the same
   queue if it uses a workqueue.

 - kprobe-events: return immediately if no new probe events are
   specified on the kernel command line at boot time. This shortens
   the kernel boot time.

 - When a kprobe is fully removed from the kernel code, retry optimizing
   another kprobe which is blocked by that kprobe.

* tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: Use dedicated kthread for kprobe optimizer
  tracing: kprobe-event: Return directly when trace kprobes is empty
  kprobes: retry blocked optprobe in do_free_cleaned_kprobes

The tracing_disabled variable is set to one on boot up to prevent some
parts of tracing to access the tracing infrastructure before it is set up.
It also can be set after boot if an anomaly is discovered.

It is currently a static variable in trace.c and can be accessed via a
function call trace_is_disabled(). There's really no reason to use a
function call as the tracing subsystem should be able to access it
directly.

By making the variable accessed directly, code can be moved out of trace.c
without adding overhead of a function call to see if tracing is disabled
or not.

Make tracing_disabled global and remove the tracing_is_disabled() helper
function. Also add some "unlikely()"s around tracing_disabled where it's
checked in hot paths.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.483690153@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When the 'kprobe_event=' kernel command-line parameter is not provided,
there is no need to execute setup_boot_kprobe_events().

This change optimizes the initialization function init_kprobe_trace()
by skipping unnecessary work and effectively prevents potential blocking
that could arise from contention on the event_mutex lock in subsequent
operations.

Link: https://patch.msgid.link/20260204015401.163748-1-tianyaxiong@kylinos.cn
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

In enable_boot_kprobe_events(), it returns directly when trace kprobes is
empty, thereby reducing the function's execution time. This function may
otherwise wait for the event_mutex lock for tens of milliseconds on certain
machines, which is unnecessary when trace kprobes is empty.

Link: https://lore.kernel.org/all/20260127053848.108473-1-sunliming@linux.dev/

Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>