linux.git/kernel/trace/bpf_trace.c, branch v5.8-rc2

maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault

2020-06-17T17:57:41+00:00

Better describe what these functions do.

Suggested-by: Linus Torvalds 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Linus Torvalds

maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault

2020-06-17T17:57:41+00:00

Better describe what these functions do.

Suggested-by: Linus Torvalds 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Linus Torvalds

maccess: always use strict semantics for probe_kernel_read

2020-06-09T16:39:15+00:00

Except for historical confusion in the kprobes/uprobes and bpf tracers,
which has been fixed now, there is no good reason to ever allow user
memory accesses from probe_kernel_read.  Switch probe_kernel_read to only
read from kernel memory.

[akpm@linux-foundation.org: update it for "mm, dump_page(): do not crash with invalid mapping pointer"]

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200521152301.2587579-17-hch@lst.de
Signed-off-by: Linus Torvalds

bpf: rework the compat kernel probe handling

2020-06-09T16:39:15+00:00

Instead of using the dangerous probe_kernel_read and strncpy_from_unsafe
helpers, rework the compat probes to check if an address is a kernel or
userspace one, and then use the low-level kernel or user probe helper
shared by the proper kernel and user probe helpers.  This slightly
changes behavior as the compat probe on a user address doesn't check
the lockdown flags, just as the pure user probes do.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200521152301.2587579-14-hch@lst.de
Signed-off-by: Linus Torvalds

bpf:bpf_seq_printf(): handle potentially unsafe format string better

2020-06-09T16:39:15+00:00

User the proper helper for kernel or userspace addresses based on
TASK_SIZE instead of the dangerous strncpy_from_unsafe function.

Signed-off-by: Andrew Morton 
Cc: Christoph Hellwig 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Thomas Gleixner 
Signed-off-by: Linus Torvalds

bpf: handle the compat string in bpf_trace_copy_string better

2020-06-09T16:39:15+00:00

User the proper helper for kernel or userspace addresses based on
TASK_SIZE instead of the dangerous strncpy_from_unsafe function.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200521152301.2587579-13-hch@lst.de
Signed-off-by: Linus Torvalds

bpf: factor out a bpf_trace_copy_string helper

2020-06-09T16:39:15+00:00

Split out a helper to do the fault free access to the string pointer
to get it out of a crazy indentation level.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200521152301.2587579-12-hch@lst.de
Signed-off-by: Linus Torvalds

maccess: rename strncpy_from_unsafe_strict to strncpy_from_kernel_nofault

2020-06-09T16:39:15+00:00

This matches the naming of strncpy_from_user_nofault, and also makes it
more clear what the function is supposed to do.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200521152301.2587579-8-hch@lst.de
Signed-off-by: Linus Torvalds

maccess: rename strncpy_from_unsafe_user to strncpy_from_user_nofault

2020-06-09T16:39:15+00:00

This matches the naming of strncpy_from_user, and also makes it more
clear what the function is supposed to do.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200521152301.2587579-7-hch@lst.de
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18+00:00

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...