If kobject_create_and_add() fails on the first iteration, then the error
code is set to -ENOMEM which is correct. But if it fails in subsequent
iterations then "ret" is zero, which means success, but it should be
-ENOMEM.
Set the error code to -ENOMEM correctly.
Fixes: 7b5ab04f035f ("timekeeping: Fix resource leak in tk_aux_sysfs_init() error paths")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Malaya Kumar Rout <mrout@redhat.com>
Link: https://patch.msgid.link/aSW1R8q5zoY_DgQE@stanley.mountain
There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().
The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:
CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().
Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running.
Fixes: 0cc04e80458a ("timers: Add shutdown mechanism to the internal functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com
tk_aux_sysfs_init() returns immediately on error during the auxiliary clock
initialization loop without cleaning up previously allocated kobjects and
sysfs groups.
If kobject_create_and_add() or sysfs_create_group() fails during loop
iteration, the parent kobjects (tko and auxo) and any previously created
child kobjects are leaked.
Fix this by adding proper error handling with goto labels to ensure all
allocated resources are cleaned up on failure. kobject_put() on the
parent kobjects will handle cleanup of their children.
Fixes: 7b95663a3d96 ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251120150213.246777-1-mrout@redhat.com
In commit 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.
In doing so, the code essentially went from this form:
if (A) {
static int ratelimit;
if (ratelimit < 10 && !C && A&D) {
pr_warn("NOHZ tick-stop error: ...");
ratelimit++;
}
return false;
}
to a new function:
static bool report_idle_softirq(void)
{
static int ratelimit;
if (likely(!A))
return false;
if (ratelimit < 10)
return false;
...
pr_warn("NOHZ tick-stop error: local softirq work is pending, handler #%02x!!!\n",
pending);
ratelimit++;
return true;
}
commit a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition") realized
ratelimit was essentially set to zero instead of ten, and hence *no*
softirq pending messages would ever be issued, but "fixed" it as:
- if (ratelimit < 10)
+ if (ratelimit >= 10)
return false;
However, this fix introduced another issue:
When ratelimit is greater than or equal 10, even if A is true, it will
directly return false. While ratelimit in the original code was only used
to control printing and will not affect the return value.
Restore the original logic and restrict ratelimit to control the printk and
not the return value.
Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Fixes: a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition")
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251119174525.29470-1-wen.yang@linux.dev
When posix timer creation is set to allocate a given timer ID and the
access to the user space value faults, the function terminates without
freeing the already allocated posix timer structure.
Move the allocation after the user space access to cure that.
[ tglx: Massaged change log ]
Fixes: ec2d0c04624b3 ("posix-timers: Provide a mechanism to allocate a given timer ID")
Reported-by: syzbot+9c47ad18f978d4394986@syzkaller.appspotmail.com
Suggested-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Eslam Khafagy <eslam.medhat1993@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/20251114122739.994326-1-eslam.medhat1993@gmail.com
Closes: https://lore.kernel.org/all/69155df4.a70a0220.3124cb.0017.GAE@google.com/T/
The loop in tk_aux_sysfs_init() uses `i <= MAX_AUX_CLOCKS` as the
termination condition, which results in 9 iterations (i=0 to 8) when
MAX_AUX_CLOCKS is defined as 8. However, the kernel is designed to support
only up to 8 auxiliary clocks.
This off-by-one error causes the creation of a 9th sysfs entry that exceeds
the intended auxiliary clock range.
Fix the loop bound to use `i < MAX_AUX_CLOCKS` to ensure exactly 8
auxiliary clock entries are created, matching the design specification.
Fixes: 7b95663a3d96 ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/tencent_2376993D9FC06A3616A4F981B3DE1C599607@qq.com
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
Pull VDSO updates from Thomas Gleixner: - Further consolidation of the VDSO infrastructure and the common data store - Simplification of the related Kconfig logic - Improve the VDSO selftest suite * tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests: vDSO: Drop vdso_test_clock_getres selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64() selftests: vDSO: vdso_test_abi: Test CPUTIME clocks selftests: vDSO: vdso_test_abi: Use explicit indices for name array selftests: vDSO: vdso_test_abi: Drop clock availability tests selftests: vDSO: vdso_test_abi: Use ksft_finished() selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper vdso: Add struct __kernel_old_timeval forward declaration to gettime.h vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO vdso: Drop Kconfig GENERIC_VDSO_TIME_NS vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE vdso: Drop kconfig GENERIC_COMPAT_VDSO vdso: Drop kconfig GENERIC_VDSO_32 riscv: vdso: Untangle Kconfig logic time: Build generic update_vsyscall() only with generic time vDSO vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs vdso: Move ENABLE_COMPAT_VDSO from core to arm64 ARM: VDSO: Remove cntvct_ok global variable vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
Pull clocksource updates from Thomas Gleixner: - Further preparations for modular clocksource/event drivers - The usual device tree updates to support new chip variants and the related changes to thise drivers - Avoid a 64-bit division in the TEGRA186 driver, which caused a build fail on 32-bit machines. - Small fixes, improvements and cleanups all over the place * tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC clocksource/drivers/sh_cmt: Split start/stop of clock source and events clocksource/drivers/clps711x: Fix resource leaks in error paths clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate() clocksource/drivers/timer-tegra186: Don't print superfluous errors clocksource/drivers/timer-rtl-otto: Simplify documentation clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts clocksource/drivers/timer-rtl-otto: Drop set_counter function clocksource/drivers/timer-rtl-otto: Work around dying timers clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver clocksource/drivers/arm_arch_timer: Add standalone MMIO driver ACPI: GTDT: Generate platform devices for MMIO timers clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3 clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT clocksource/drivers/vf-pit: Unify the function name for irq ack clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable ...
Pull timer core updates from Thomas Gleixner: - Address the inconsistent shutdown sequence of per CPU clockevents on CPU hotplug, which only removed it from the core but failed to invoke the actual device driver shutdown callback. This kept the timer active, which prevented power savings and caused pointless noise in virtualization. - Encapsulate the open coded access to the hrtimer clock base, which is a private implementation detail, so that the implementation can be changed without breaking a lot of usage sites. - Enhance the debug output of the clocksource watchdog to provide better information for analysis. - The usual set of cleanups and enhancements all over the place * tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Fix spelling mistakes in comments clocksource: Print durations for sync check unconditionally LoongArch: Remove clockevents shutdown call on offlining tick: Do not set device to detached state in tick_shutdown() hrtimer: Reorder branches in hrtimer_clockid_to_base() hrtimer: Remove hrtimer_clock_base:: Get_time hrtimer: Use hrtimer_cb_get_time() helper media: pwm-ir-tx: Avoid direct access to hrtimer clockbase ALSA: hrtimer: Avoid direct access to hrtimer clockbase lib: test_objpool: Avoid direct access to hrtimer clockbase sched/core: Avoid direct access to hrtimer clockbase timers/itimer: Avoid direct access to hrtimer clockbase posix-timers: Avoid direct access to hrtimer clockbase jiffies: Remove obsolete SHIFTED_HZ comment