Checking for and processing RCU-nocb deferred wakeup upon user/guest
entry is only relevant when nohz_full runs on the local CPU, otherwise
the periodic tick should take care of it.

Make sure we don't needlessly pollute these fast-paths as a -3%
performance regression on a will-it-scale.per_process_ops has been
reported so far.

Fixes: 47b8ff194c1f (entry: Explicitly flush pending rcuog wakeup before last rescheduling point)
Fixes: 4ae7dc97f726 (entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point)
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210527113441.465489-1-frederic@kernel.org

RTC drivers used to leave .set_alarm() NULL in order to signal the RTC
device doesn't support alarms. The drivers are now clearing the
RTC_FEATURE_ALARM bit for that purpose in order to keep the rtc_class_ops
structure const. So now, .set_alarm() is set unconditionally and this
possibly causes the alarmtimer code to select an RTC device that doesn't
support alarms.

Test RTC_FEATURE_ALARM instead of relying on ops->set_alarm to determine
whether alarms are available.

Fixes: 7ae41220ef58 ("rtc: introduce features bitfield")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511014516.563031-1-alexandre.belloni@bootlin.com

Pull kvm updates from Paolo Bonzini:
 "This is a large update by KVM standards, including AMD PSP (Platform
  Security Processor, aka "AMD Secure Technology") and ARM CoreSight
  (debug and trace) changes.

  ARM:

   - CoreSight: Add support for ETE and TRBE

   - Stage-2 isolation for the host kernel when running in protected
     mode

   - Guest SVE support when running in nVHE mode

   - Force W^X hypervisor mappings in nVHE mode

   - ITS save/restore for guests using direct injection with GICv4.1

   - nVHE panics now produce readable backtraces

   - Guest support for PTP using the ptp_kvm driver

   - Performance improvements in the S2 fault handler

  x86:

   - AMD PSP driver changes

   - Optimizations and cleanup of nested SVM code

   - AMD: Support for virtual SPEC_CTRL

   - Optimizations of the new MMU code: fast invalidation, zap under
     read lock, enable/disably dirty page logging under read lock

   - /dev/kvm API for AMD SEV live migration (guest API coming soon)

   - support SEV virtual machines sharing the same encryption context

   - support SGX in virtual machines

   - add a few more statistics

   - improved directed yield heuristics

   - Lots and lots of cleanups

  Generic:

   - Rework of MMU notifier interface, simplifying and optimizing the
     architecture-specific code

   - a handful of "Get rid of oprofile leftovers" patches

   - Some selftests improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
  KVM: selftests: Speed up set_memory_region_test
  selftests: kvm: Fix the check of return value
  KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
  KVM: SVM: Skip SEV cache flush if no ASIDs have been used
  KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
  KVM: SVM: Drop redundant svm_sev_enabled() helper
  KVM: SVM: Move SEV VMCB tracking allocation to sev.c
  KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
  KVM: SVM: Unconditionally invoke sev_hardware_teardown()
  KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
  KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
  KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
  KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
  KVM: SVM: Move SEV module params/variables to sev.c
  KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
  KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
  KVM: SVM: Zero out the VMCB array used to track SEV ASID association
  x86/sev: Drop redundant and potentially misleading 'sev_enabled'
  KVM: x86: Move reverse CPUID helpers to separate header file
  KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
  ...

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...

Pull timer updates from Thomas Gleixner:
 "The time and timers updates contain:

  Core changes:

   - Allow runtime power management when the clocksource is changed.

   - A correctness fix for clock_adjtime32() so that the return value on
     success is not overwritten by the result of the copy to user.

   - Allow late installment of broadcast clockevent devices which was
     broken because nothing switched them over to oneshot mode. This
     went unnoticed so far because clockevent devices used to be built
     in, but now people started to make them modular.

   - Debugfs related simplifications

   - Small cleanups and improvements here and there

  Driver changes:

   - The usual set of device tree binding updates for a wide range of
     drivers/devices.

   - The usual updates and improvements for drivers all over the place
     but nothing outstanding.

   - No new clocksource/event drivers. They'll come back next time"

* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  posix-timers: Preserve return value in clock_adjtime32()
  tick/broadcast: Allow late registered device to enter oneshot mode
  tick: Use tick_check_replacement() instead of open coding it
  time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
  dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
  clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
  clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
  clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
  clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
  clocksource/drivers/npcm: Add support for WPCM450
  clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
  clocksource/drivers/pistachio: Fix trivial typo
  clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
  clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
  clocksource/drivers/timer-ti-dm: Fix posted mode status check order
  dt-bindings: timer: renesas,cmt: Document R8A77961
  dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
  clocksource/drivers/ingenic-ost: Add support for the JZ4760B
  clocksource/drivers/ingenic: Add support for the JZ4760
  dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
  ...

Pull irq updates from Thomas Gleixner:
 "The usual updates from the irq departement:

  Core changes:

   - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
     be cleaned up which either use a seperate mechanism to prevent
     auto-enable at request time or have a racy mechanism which disables
     the interrupt right after request.

   - Get rid of the last usage of irq_create_identity_mapping() and
     remove the interface.

   - An overhaul of tasklet_disable().

     Most usage sites of tasklet_disable() are in task context and
     usually in cleanup, teardown code pathes. tasklet_disable()
     spinwaits for a tasklet which is currently executed. That's not
     only a problem for PREEMPT_RT where this can lead to a live lock
     when the disabling task preempts the softirq thread. It's also
     problematic in context of virtualization when the vCPU which runs
     the tasklet is scheduled out and the disabling code has to spin
     wait until it's scheduled back in.

     There are a few code pathes which invoke tasklet_disable() from
     non-sleepable context. For these a new disable variant which still
     spinwaits is provided which allows to switch tasklet_disable() to a
     sleep wait mechanism. For the atomic use cases this does not solve
     the live lock issue on PREEMPT_RT. That is mitigated by blocking on
     the RT specific softirq lock.

   - The PREEMPT_RT specific implementation of softirq processing and
     local_bh_disable/enable().

     On RT enabled kernels soft interrupt processing happens always in
     task context and all interrupt handlers, which are not explicitly
     marked to be invoked in hard interrupt context are forced into task
     context as well. This allows to protect against softirq processing
     with a per CPU lock, which in turn allows to make BH disabled
     regions preemptible.

     Most of the softirq handling code is still shared. The RT/non-RT
     specific differences are addressed with a set of inline functions
     which provide the context specific functionality. The
     local_bh_disable() / local_bh_enable() mechanism are obviously
     seperate.

   - The usual set of small improvements and cleanups

  Driver changes:

   - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
     controllers

   - Extended functionality for MStar, STM32 and SC7280 irq chips

   - Enhanced robustness for ARM GICv3/4.1 drivers

   - The usual set of cleanups and improvements all over the place"

* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
  irqchip/gic-v3: Do not enable irqs when handling spurious interrups
  dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
  irqchip: Add support for IDT 79rc3243x interrupt controller
  irqdomain: Drop references to recusive irqdomain setup
  irqdomain: Get rid of irq_create_strict_mappings()
  irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
  ARM: PXA: Kill use of irq_create_strict_mappings()
  irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
  irqchip/tb10x: Use 'fallthrough' to eliminate a warning
  genirq: Reduce irqdebug cacheline bouncing
  kernel: Initialize cpumask before parsing
  irqchip/wpcm450: Drop COMPILE_TEST
  irqchip/irq-mst: Support polarity configuration
  irqchip: Add driver for WPCM450 interrupt controller
  dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
  dt-bindings: qcom,pdc: Add compatible for sc7280
  irqchip/stm32: Add usart instances exti direct event support
  irqchip/gic-v3: Fix OF_BAD_ADDR error handling
  irqchip/sifive-plic: Mark two global variables __ro_after_init
  ...

KVM/arm64 updates for Linux 5.13

New features:

- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)

Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
  oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset

The return value on success (>= 0) is overwritten by the return value of
put_old_timex32(). That works correct in the fault case, but is wrong for
the success case where put_old_timex32() returns 0.

Just check the return value of put_old_timex32() and return -EFAULT in case
it is not zero.

[ tglx: Massage changelog ]

Fixes: 3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210414030449.90692-1-chenjun102@huawei.com

The broadcast device is switched to oneshot mode when the system switches
to oneshot mode. If a broadcast clock event device is registered after the
system switched to oneshot mode, it will stay in periodic mode forever.

Ensure that a late registered device which is selected as broadcast device
is initialized in oneshot mode when the system already uses oneshot mode.

[ tglx: Massage changelog ]

Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210331083318.21794-1-jindong.yue@nxp.com

The function tick_check_replacement() is the combination of
tick_check_percpu() and tick_check_preferred(), but tick_check_new_device()
has the same logic open coded.

Use the helper to simplify the code.

[ tglx: Massage changelog ]

Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210326022328.3266-1-wangwensheng4@huawei.com