linux.git/kernel/sched/idle.c, branch v4.18 Linux kernel source tree sched: idle: Select idle state before stopping the tick 2018-04-09T09:54:07+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2018-04-03T21:17:11+00:00 554c8aa8ecade210d58a252173bb8f2106552a44 In order to address the issue with short idle duration predictions by the idle governor after the scheduler tick has been stopped, reorder the code in cpuidle_idle_call() so that the governor idle state selection runs before tick_nohz_idle_go_idle() and use the "nohz" hint returned by cpuidle_select() to decide whether or not to stop the tick. This isn't straightforward, because menu_select() invokes tick_nohz_get_sleep_length() to get the time to the next timer event and the number returned by the latter comes from __tick_nohz_idle_stop_tick(). Fortunately, however, it is possible to compute that number without actually stopping the tick and with the help of the existing code. Namely, tick_nohz_get_sleep_length() can be made call tick_nohz_next_event(), introduced earlier, to get the time to the next non-highres timer event. If that happens, tick_nohz_next_event() need not be called by __tick_nohz_idle_stop_tick() again. If it turns out that the scheduler tick cannot be stopped going forward or the next timer event is too close for the tick to be stopped, tick_nohz_get_sleep_length() can simply return the time to the next event currently programmed into the corresponding clock event device. In addition to knowing the return value of tick_nohz_next_event(), however, tick_nohz_get_sleep_length() needs to know the time to the next highres timer event, but with the scheduler tick timer excluded, which can be computed with the help of hrtimer_get_next_event(). That minimum of that number and the tick_nohz_next_event() return value is the total time to the next timer event with the assumption that the tick will be stopped. It can be returned to the idle governor which can use it for predicting idle duration (under the assumption that the tick will be stopped) and deciding whether or not it makes sense to stop the tick before putting the CPU into the selected idle state. With the above, the sleep_length field in struct tick_sched is not necessary any more, so drop it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227 Reported-by: Doug Smythies <dsmythies@telus.net> Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> 
In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped,
reorder the code in cpuidle_idle_call() so that the governor idle
state selection runs before tick_nohz_idle_go_idle() and use the
"nohz" hint returned by cpuidle_select() to decide whether or not
to stop the tick.

This isn't straightforward, because menu_select() invokes
tick_nohz_get_sleep_length() to get the time to the next timer
event and the number returned by the latter comes from
__tick_nohz_idle_stop_tick().  Fortunately, however, it is possible
to compute that number without actually stopping the tick and with
the help of the existing code.

Namely, tick_nohz_get_sleep_length() can be made call
tick_nohz_next_event(), introduced earlier, to get the time to the
next non-highres timer event.  If that happens, tick_nohz_next_event()
need not be called by __tick_nohz_idle_stop_tick() again.

If it turns out that the scheduler tick cannot be stopped going
forward or the next timer event is too close for the tick to be
stopped, tick_nohz_get_sleep_length() can simply return the time to
the next event currently programmed into the corresponding clock
event device.

In addition to knowing the return value of tick_nohz_next_event(),
however, tick_nohz_get_sleep_length() needs to know the time to the
next highres timer event, but with the scheduler tick timer excluded,
which can be computed with the help of hrtimer_get_next_event().

That minimum of that number and the tick_nohz_next_event() return
value is the total time to the next timer event with the assumption
that the tick will be stopped.  It can be returned to the idle
governor which can use it for predicting idle duration (under the
assumption that the tick will be stopped) and deciding whether or
not it makes sense to stop the tick before putting the CPU into the
selected idle state.

With the above, the sleep_length field in struct tick_sched is not
necessary any more, so drop it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227
Reported-by: Doug Smythies <dsmythies@telus.net>
Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
cpuidle: Return nohz hint from cpuidle_select() 2018-04-06T07:29:34+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2018-03-22T16:50:49+00:00 45f1ff59e27ca59d33cc1a317e669d90022ccf7d Add a new pointer argument to cpuidle_select() and to the ->select cpuidle governor callback to allow a boolean value indicating whether or not the tick should be stopped before entering the selected state to be returned from there. Make the ladder governor ignore that pointer (to preserve its current behavior) and make the menu governor return 'false" through it if: (1) the idle exit latency is constrained at 0, or (2) the selected state is a polling one, or (3) the expected idle period duration is within the tick period range. In addition to that, the correction factor computations in the menu governor need to take the possibility that the tick may not be stopped into account to avoid artificially small correction factor values. To that end, add a mechanism to record tick wakeups, as suggested by Peter Zijlstra, and use it to modify the menu_update() behavior when tick wakeup occurs. Namely, if the CPU is woken up by the tick and the return value of tick_nohz_get_sleep_length() is not within the tick boundary, the predicted idle duration is likely too short, so make menu_update() try to compensate for that by updating the governor statistics as though the CPU was idle for a long time. Since the value returned through the new argument pointer of cpuidle_select() is not used by its caller yet, this change by itself is not expected to alter the functionality of the code. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> 
Add a new pointer argument to cpuidle_select() and to the ->select
cpuidle governor callback to allow a boolean value indicating
whether or not the tick should be stopped before entering the
selected state to be returned from there.

Make the ladder governor ignore that pointer (to preserve its
current behavior) and make the menu governor return 'false" through
it if:
 (1) the idle exit latency is constrained at 0, or
 (2) the selected state is a polling one, or
 (3) the expected idle period duration is within the tick period
     range.

In addition to that, the correction factor computations in the menu
governor need to take the possibility that the tick may not be
stopped into account to avoid artificially small correction factor
values.  To that end, add a mechanism to record tick wakeups, as
suggested by Peter Zijlstra, and use it to modify the menu_update()
behavior when tick wakeup occurs.  Namely, if the CPU is woken up by
the tick and the return value of tick_nohz_get_sleep_length() is not
within the tick boundary, the predicted idle duration is likely too
short, so make menu_update() try to compensate for that by updating
the governor statistics as though the CPU was idle for a long time.

Since the value returned through the new argument pointer of
cpuidle_select() is not used by its caller yet, this change by
itself is not expected to alter the functionality of the code.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
sched: idle: Do not stop the tick before cpuidle_idle_call() 2018-04-05T17:01:29+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2018-03-15T22:07:41+00:00 ed98c34919985a9f87c3edacb9a8d8c283c9e243 Make cpuidle_idle_call() decide whether or not to stop the tick. First, the cpuidle_enter_s2idle() path deals with the tick (and with the entire timekeeping for that matter) by itself and it doesn't need the tick to be stopped beforehand. Second, to address the issue with short idle duration predictions by the idle governor after the tick has been stopped, it will be necessary to change the ordering of cpuidle_select() with respect to tick_nohz_idle_stop_tick(). To prepare for that, put a tick_nohz_idle_stop_tick() call in the same branch in which cpuidle_select() is called. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> 
Make cpuidle_idle_call() decide whether or not to stop the tick.

First, the cpuidle_enter_s2idle() path deals with the tick (and with
the entire timekeeping for that matter) by itself and it doesn't need
the tick to be stopped beforehand.

Second, to address the issue with short idle duration predictions
by the idle governor after the tick has been stopped, it will be
necessary to change the ordering of cpuidle_select() with respect
to tick_nohz_idle_stop_tick().  To prepare for that, put a
tick_nohz_idle_stop_tick() call in the same branch in which
cpuidle_select() is called.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
sched: idle: Do not stop the tick upfront in the idle loop 2018-04-05T17:01:14+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2018-03-15T22:05:50+00:00 2aaf709a518d26563b80fd7a42379d7aa7ffed4a Push the decision whether or not to stop the tick somewhat deeper into the idle loop. Stopping the tick upfront leads to unpleasant outcomes in case the idle governor doesn't agree with the nohz code on the duration of the upcoming idle period. Specifically, if the tick has been stopped and the idle governor predicts short idle, the situation is bad regardless of whether or not the prediction is accurate. If it is accurate, the tick has been stopped unnecessarily which means excessive overhead. If it is not accurate, the CPU is likely to spend too much time in the (shallow, because short idle has been predicted) idle state selected by the governor [1]. As the first step towards addressing this problem, change the code to make the tick stopping decision inside of the loop in do_idle(). In particular, do not stop the tick in the cpu_idle_poll() code path. Also don't do that in tick_nohz_irq_exit() which doesn't really have enough information on whether or not to stop the tick. Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1] Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdf Suggested-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> 
Push the decision whether or not to stop the tick somewhat deeper
into the idle loop.

Stopping the tick upfront leads to unpleasant outcomes in case the
idle governor doesn't agree with the nohz code on the duration of the
upcoming idle period.  Specifically, if the tick has been stopped and
the idle governor predicts short idle, the situation is bad regardless
of whether or not the prediction is accurate.  If it is accurate, the
tick has been stopped unnecessarily which means excessive overhead.
If it is not accurate, the CPU is likely to spend too much time in
the (shallow, because short idle has been predicted) idle state
selected by the governor [1].

As the first step towards addressing this problem, change the code
to make the tick stopping decision inside of the loop in do_idle().
In particular, do not stop the tick in the cpu_idle_poll() code path.
Also don't do that in tick_nohz_irq_exit() which doesn't really have
enough information on whether or not to stop the tick.

Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1]
Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdf
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
time: tick-sched: Reorganize idle tick management code 2018-04-05T16:58:47+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2018-04-05T16:58:27+00:00 0e7767687fdabfc58d5046e7488632bf2ecd4d0c Prepare the scheduler tick code for reworking the idle loop to avoid stopping the tick in some cases. The idea is to split the nohz idle entry call to decouple the idle time stats accounting and preparatory work from the actual tick stop code, in order to later be able to delay the tick stop once we reach more power-knowledgeable callers. Move away the tick_nohz_start_idle() invocation from __tick_nohz_idle_enter(), rename the latter to __tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick() as a wrapper around it for calling it from the outside. Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead of calling the entire __tick_nohz_idle_enter(), add another wrapper disabling and enabling interrupts around tick_nohz_idle_stop_tick() and make the current callers of tick_nohz_idle_enter() call it too to retain their current functionality. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> 
Prepare the scheduler tick code for reworking the idle loop to
avoid stopping the tick in some cases.

The idea is to split the nohz idle entry call to decouple the idle
time stats accounting and preparatory work from the actual tick stop
code, in order to later be able to delay the tick stop once we reach
more power-knowledgeable callers.

Move away the tick_nohz_start_idle() invocation from
__tick_nohz_idle_enter(), rename the latter to
__tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick()
as a wrapper around it for calling it from the outside.

Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead
of calling the entire __tick_nohz_idle_enter(), add another wrapper
disabling and enabling interrupts around tick_nohz_idle_stop_tick()
and make the current callers of tick_nohz_idle_enter() call it too
to retain their current functionality.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
sched/idle: Merge kernel/sched/idle.c and kernel/sched/idle_task.c 2018-03-04T11:39:33+00:00 Ingo Molnar mingo@kernel.org 2018-03-03T14:44:39+00:00 a92057e14beb233e8c891f4de075f2a468c71f15 Merge these two small .c modules as they implement two aspects of idle task handling. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Merge these two small .c modules as they implement two aspects
of idle task handling.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sched/headers: Simplify and clean up header usage in the scheduler 2018-03-04T11:39:29+00:00 Ingo Molnar mingo@kernel.org 2018-03-03T11:20:47+00:00 325ea10c0809406ce23f038602abbc454f3f761d Do the following cleanups and simplifications: - sched/sched.h already includes <asm/paravirt.h>, so no need to include it in sched/core.c again. - order the <linux/sched/*.h> headers alphabetically - add all <linux/sched/*.h> headers to kernel/sched/sched.h - remove all unnecessary includes from the .c files that are already included in kernel/sched/sched.h. Finally, make all scheduler .c files use a single common header: #include "sched.h" ... which now contains a union of the relied upon headers. This makes the various .c files easier to read and easier to handle. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Do the following cleanups and simplifications:

 - sched/sched.h already includes <asm/paravirt.h>, so no need to
   include it in sched/core.c again.

 - order the <linux/sched/*.h> headers alphabetically

 - add all <linux/sched/*.h> headers to kernel/sched/sched.h

 - remove all unnecessary includes from the .c files that
   are already included in kernel/sched/sched.h.

Finally, make all scheduler .c files use a single common header:

  #include "sched.h"

... which now contains a union of the relied upon headers.

This makes the various .c files easier to read and easier to handle.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sched: Clean up and harmonize the coding style of the scheduler code base 2018-03-03T14:50:21+00:00 Ingo Molnar mingo@kernel.org 2018-03-03T13:01:12+00:00 97fb7a0a8944bd6d2c5634e1e0fa689a5c40bc22 A good number of small style inconsistencies have accumulated in the scheduler core, so do a pass over them to harmonize all these details: - fix speling in comments, - use curly braces for multi-line statements, - remove unnecessary parentheses from integer literals, - capitalize consistently, - remove stray newlines, - add comments where necessary, - remove invalid/unnecessary comments, - align structure definitions and other data types vertically, - add missing newlines for increased readability, - fix vertical tabulation where it's misaligned, - harmonize preprocessor conditional block labeling and vertical alignment, - remove line-breaks where they uglify the code, - add newline after local variable definitions, No change in functionality: md5: 1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm 1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:

 - fix speling in comments,

 - use curly braces for multi-line statements,

 - remove unnecessary parentheses from integer literals,

 - capitalize consistently,

 - remove stray newlines,

 - add comments where necessary,

 - remove invalid/unnecessary comments,

 - align structure definitions and other data types vertically,

 - add missing newlines for increased readability,

 - fix vertical tabulation where it's misaligned,

 - harmonize preprocessor conditional block labeling
   and vertical alignment,

 - remove line-breaks where they uglify the code,

 - add newline after local variable definitions,

No change in functionality:

  md5:
     1191fa0a890cfa8132156d2959d7e9e2  built-in.o.before.asm
     1191fa0a890cfa8132156d2959d7e9e2  built-in.o.after.asm

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sched/idle: Micro-optimize the idle loop 2017-10-26T06:31:29+00:00 Cheng Jian cj.chengjian@huawei.com 2017-10-25T11:28:27+00:00 54b933c6c954a8b7b0c2b40a1c4d3f7279d11e22 Move the loop-invariant calculation of 'cpu' in do_idle() out of the loop body, because the current CPU is always constant. This improves the generated code both on x86-64 and ARM64: x86-64: Before patch (execution in loop): 864: 0f ae e8 lfence 867: 65 8b 05 c2 38 f1 7e mov %gs:0x7ef138c2(%rip),%eax 86e: 89 c0 mov %eax,%eax 870: 48 0f a3 05 68 19 08 bt %rax,0x1081968(%rip) 877: 01 After patch (execution in loop): 872: 0f ae e8 lfence 875: 4c 0f a3 25 63 19 08 bt %r12,0x1081963(%rip) 87c: 01 ARM64: Before patch (execution in loop): c58: d5033d9f dsb ld c5c: d538d080 mrs x0, tpidr_el1 c60: b8606a61 ldr w1, [x19,x0] c64: 1100fc20 add w0, w1, #0x3f c68: 7100003f cmp w1, #0x0 c6c: 1a81b000 csel w0, w0, w1, lt c70: 13067c00 asr w0, w0, #6 c74: 93407c00 sxtw x0, w0 c78: f8607a80 ldr x0, [x20,x0,lsl #3] c7c: 9ac12401 lsr x1, x0, x1 c80: 36000581 tbz w1, #0, d30 <do_idle+0x128> After patch (execution in loop): c84: d5033d9f dsb ld c88: f9400260 ldr x0, [x19] c8c: ea14001f tst x0, x20 c90: 54000580 b.eq d40 <do_idle+0x138> Signed-off-by: Cheng Jian <cj.chengjian@huawei.com> [ Rewrote the title and the changelog. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: huawei.libin@huawei.com Cc: xiexiuqi@huawei.com Link: http://lkml.kernel.org/r/1508930907-107755-1-git-send-email-cj.chengjian@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Move the loop-invariant calculation of 'cpu' in do_idle() out of the loop body,
because the current CPU is always constant.

This improves the generated code both on x86-64 and ARM64:

x86-64:

Before patch (execution in loop):
	864:       0f ae e8                lfence
	867:       65 8b 05 c2 38 f1 7e    mov %gs:0x7ef138c2(%rip),%eax
	86e:       89 c0                   mov %eax,%eax
	870:       48 0f a3 05 68 19 08    bt  %rax,0x1081968(%rip)
	877:	   01

After patch (execution in loop):
	872:       0f ae e8                lfence
	875:       4c 0f a3 25 63 19 08    bt  %r12,0x1081963(%rip)
	87c:       01

ARM64:

Before patch (execution in loop):
	c58:       d5033d9f        dsb     ld
	c5c:       d538d080        mrs     x0, tpidr_el1
	c60:       b8606a61        ldr     w1, [x19,x0]
	c64:       1100fc20        add     w0, w1, #0x3f
	c68:       7100003f        cmp     w1, #0x0
	c6c:       1a81b000        csel    w0, w0, w1, lt
	c70:       13067c00        asr     w0, w0, #6
	c74:       93407c00        sxtw    x0, w0
	c78:       f8607a80        ldr     x0, [x20,x0,lsl #3]
	c7c:       9ac12401        lsr     x1, x0, x1
	c80:       36000581        tbz     w1, #0, d30 <do_idle+0x128>

After patch (execution in loop):
	c84:       d5033d9f        dsb     ld
	c88:       f9400260        ldr     x0, [x19]
	c8c:       ea14001f        tst     x0, x20
	c90:       54000580        b.eq    d40 <do_idle+0x138>

Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
[ Rewrote the title and the changelog. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: huawei.libin@huawei.com
Cc: xiexiuqi@huawei.com
Link: http://lkml.kernel.org/r/1508930907-107755-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sched/idle: Move quiet_vmstate() into the NOHZ code 2017-10-10T09:43:29+00:00 Peter Zijlstra peterz@infradead.org 2017-08-29T13:07:54+00:00 62cb1188ed86a9cf082fd2f757d4dd9b54741f24 quiet_vmstat() is an expensive function that only makes sense when we go into NOHZ. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: aubrey.li@linux.intel.com Cc: cl@linux.com Cc: fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
quiet_vmstat() is an expensive function that only makes sense when we
go into NOHZ.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: aubrey.li@linux.intel.com
Cc: cl@linux.com
Cc: fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>