linux.git/kernel/sched/fair.c, branch v3.13-rc2

sched/fair: Avoid integer overflow

2013-11-13T12:33:55+00:00

sa->runnable_avg_sum is of type u32 but after shifting it by NICE_0_SHIFT
bits it is promoted to u64.  This of course makes no sense, since the
result will never be more then 32-bit long.  Casting sa->runnable_avg_sum
to u64 before it is shifted, fixes this problem.

Reviewed-by: Ben Segall 
Signed-off-by: Michal Nazarewicz 
Signed-off-by: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1384112521-25177-1-git-send-email-mpn@google.com
Signed-off-by: Ingo Molnar

sched/numa: Cure update_numa_stats() vs. hotplug

2013-11-13T12:33:52+00:00

Because we're completely unserialized against hotplug its well
possible to try and generate numa stats for an offlined node.

Bail out early (and avoid a /0) in this case. The resulting stats are
all 0 which should result in an undesirable balance target -- not to
mention that actually trying to migrate to an offline CPU will fail.

Reported-by: Prarit Bhargava 
Signed-off-by: Peter Zijlstra 
Cc: Mel Gorman 
Link: http://lkml.kernel.org/n/tip-orja0qylcvyhxfsuebcyL5sI@git.kernel.org
Signed-off-by: Ingo Molnar

sched/numa: Fix NULL pointer dereference in task_numa_migrate()

2013-11-13T12:33:51+00:00

The cpusets code can split up the scheduler's domain tree into
smaller domains.  Some of those smaller domains may not cross
NUMA nodes at all, leading to a NULL pointer dereference on the
per-cpu sd_numa pointer.

Tasks cannot be migrated out of their domain, so the patch
also sets p->numa_preferred_nid to whereever they are, to
prevent the migration from being retried over and over again.

Reported-by: Prarit Bhargava 
Signed-off-by: Rik van Riel 
Signed-off-by: Peter Zijlstra 
Cc: Mel Gorman 
Link: http://lkml.kernel.org/n/tip-oosqomw0Jput0Jkvoowhrqtu@git.kernel.org
Signed-off-by: Ingo Molnar

sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus

2013-11-06T11:37:55+00:00

nr_busy_cpus parameter is used by nohz_kick_needed() to find out the
number of busy cpus in a sched domain which has SD_SHARE_PKG_RESOURCES
flag set.  Therefore instead of updating nr_busy_cpus at every level
of sched domain, since it is irrelevant, we can update this parameter
only at the parent domain of the sd which has this flag set. Introduce
a per-cpu parameter sd_busy which represents this parent domain.

In nohz_kick_needed() we directly query the nr_busy_cpus parameter
associated with the groups of sd_busy.

By associating sd_busy with the highest domain which has
SD_SHARE_PKG_RESOURCES flag set, we cover all lower level domains
which could have this flag set and trigger nohz_idle_balancing if any
of the levels have more than one busy cpu.

sd_busy is irrelevant for asymmetric load balancing. However sd_asym
has been introduced to represent the highest sched domain which has
SD_ASYM_PACKING flag set so that it can be queried directly when
required.

While we are at it, we might as well change the nohz_idle parameter to
be updated at the sd_busy domain level alone and not the base domain
level of a CPU.  This will unify the concept of busy cpus at just one
level of sched domain where it is currently used.

Signed-off-by: Preeti U Murthy
Signed-off-by: Peter Zijlstra 
Cc: svaidy@linux.vnet.ibm.com
Cc: vincent.guittot@linaro.org
Cc: bitbucket@online.de
Cc: benh@kernel.crashing.org
Cc: anton@samba.org
Cc: Morten.Rasmussen@arm.com
Cc: pjt@google.com
Cc: peterz@infradead.org
Cc: mikey@neuling.org
Link: http://lkml.kernel.org/r/20131030031252.23426.4417.stgit@preeti.in.ibm.com
Signed-off-by: Ingo Molnar

sched: Fix asymmetric scheduling for POWER7

2013-11-06T11:37:54+00:00

Asymmetric scheduling within a core is a scheduler loadbalancing
feature that is triggered when SD_ASYM_PACKING flag is set.  The goal
for the load balancer is to move tasks to lower order idle SMT threads
within a core on a POWER7 system.

In nohz_kick_needed(), we intend to check if our sched domain (core)
is completely busy or we have idle cpu.

The following check for SD_ASYM_PACKING:

    (cpumask_first_and(nohz.idle_cpus_mask, sched_domain_span(sd)) < cpu)

already covers the case of checking if the domain has an idle cpu,
because cpumask_first_and() will not yield any set bits if this domain
has no idle cpu.

Hence, nr_busy check against group weight can be removed.

Reported-by: Michael Neuling 
Signed-off-by: Vaidyanathan Srinivasan 
Signed-off-by: Preeti U Murthy 
Tested-by: Michael Neuling 
Signed-off-by: Peter Zijlstra 
Cc: vincent.guittot@linaro.org
Cc: bitbucket@online.de
Cc: benh@kernel.crashing.org
Cc: anton@samba.org
Cc: Morten.Rasmussen@arm.com
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131030031242.23426.13019.stgit@preeti.in.ibm.com
Signed-off-by: Ingo Molnar

sched: Avoid throttle_cfs_rq() racing with period_timer stopping

2013-10-29T11:02:32+00:00

throttle_cfs_rq() doesn't check to make sure that period_timer is running,
and while update_curr/assign_cfs_runtime does, a concurrently running
period_timer on another cpu could cancel itself between this cpu's
update_curr and throttle_cfs_rq(). If there are no other cfs_rqs running
in the tg to restart the timer, this causes the cfs_rq to be stranded
forever.

Fix this by calling __start_cfs_bandwidth() in throttle if the timer is
inactive.

(Also add some sched_debug lines for cfs_bandwidth.)

Tested: make a run/sleep task in a cgroup, loop switching the cgroup
between 1ms/100ms quota and unlimited, checking for timer_active=0 and
throttled=1 as a failure. With the throttle_cfs_rq() change commented out
this fails, with the full patch it passes.

Signed-off-by: Ben Segall 
Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181632.22647.84174.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar

sched: Guarantee new group-entities always have weight

2013-10-29T11:02:23+00:00

Currently, group entity load-weights are initialized to zero. This
admits some races with respect to the first time they are re-weighted in
earlty use. ( Let g[x] denote the se for "g" on cpu "x". )

Suppose that we have root->a and that a enters a throttled state,
immediately followed by a[0]->t1 (the only task running on cpu[0])
blocking:

  put_prev_task(group_cfs_rq(a[0]), t1)
  put_prev_entity(..., t1)
  check_cfs_rq_runtime(group_cfs_rq(a[0]))
  throttle_cfs_rq(group_cfs_rq(a[0]))

Then, before unthrottling occurs, let a[0]->b[0]->t2 wake for the first
time:

  enqueue_task_fair(rq[0], t2)
  enqueue_entity(group_cfs_rq(b[0]), t2)
  enqueue_entity_load_avg(group_cfs_rq(b[0]), t2)
  account_entity_enqueue(group_cfs_ra(b[0]), t2)
  update_cfs_shares(group_cfs_rq(b[0]))
  < skipped because b is part of a throttled hierarchy >
  enqueue_entity(group_cfs_rq(a[0]), b[0])
  ...

We now have b[0] enqueued, yet group_cfs_rq(a[0])->load.weight == 0
which violates invariants in several code-paths. Eliminate the
possibility of this by initializing group entity weight.

Signed-off-by: Paul Turner 
Signed-off-by: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20131016181627.22647.47543.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar

sched: Fix hrtimer_cancel()/rq->lock deadlock

2013-10-29T11:02:21+00:00

__start_cfs_bandwidth calls hrtimer_cancel while holding rq->lock,
waiting for the hrtimer to finish. However, if sched_cfs_period_timer
runs for another loop iteration, the hrtimer can attempt to take
rq->lock, resulting in deadlock.

Fix this by ensuring that cfs_b->timer_active is cleared only if the
_latest_ call to do_sched_cfs_period_timer is returning as idle. Then
__start_cfs_bandwidth can just call hrtimer_try_to_cancel and wait for
that to succeed or timer_active == 1.

Signed-off-by: Ben Segall 
Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181622.22647.16643.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar

sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining

2013-10-29T11:02:20+00:00

hrtimer_expires_remaining does not take internal hrtimer locks and thus
must be guarded against concurrent __hrtimer_start_range_ns (but
returning HRTIMER_RESTART is safe). Use cfs_b->lock to make it safe.

Signed-off-by: Ben Segall 
Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181617.22647.73829.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar

sched: Fix race on toggling cfs_bandwidth_used

2013-10-29T11:02:19+00:00

When we transition cfs_bandwidth_used to false, any currently
throttled groups will incorrectly return false from cfs_rq_throttled.
While tg_set_cfs_bandwidth will unthrottle them eventually, currently
running code (including at least dequeue_task_fair and
distribute_cfs_runtime) will cause errors.

Fix this by turning off cfs_bandwidth_used only after unthrottling all
cfs_rqs.

Tested: toggle bandwidth back and forth on a loaded cgroup. Caused
crashes in minutes without the patch, hasn't crashed with it.

Signed-off-by: Ben Segall 
Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181611.22647.80365.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar