The sched_clock_irqtime was defined as a static key in:
8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
However, this change introduces a 'sleeping in atomic context' warning:
arch/x86/kernel/tsc.c:1214 mark_tsc_unstable()
warn: sleeping in atomic context
As analyzed by Dan, the affected code path is as follows:
vcpu_load() <- disables preempt
-> kvm_arch_vcpu_load()
-> mark_tsc_unstable() <- sleeps
virt/kvm/kvm_main.c
166 void vcpu_load(struct kvm_vcpu *vcpu)
167 {
168 int cpu = get_cpu();
^^^^^^^^^^
This get_cpu() disables preemption.
169
170 __this_cpu_write(kvm_running_vcpu, vcpu);
171 preempt_notifier_register(&vcpu->preempt_notifier);
172 kvm_arch_vcpu_load(vcpu, cpu);
173 put_cpu();
174 }
arch/x86/kvm/x86.c
4979 if (unlikely(vcpu->cpu != cpu) || kvm_check_tsc_unstable()) {
4980 s64 tsc_delta = !vcpu->arch.last_host_tsc ? 0 :
4981 rdtsc() - vcpu->arch.last_host_tsc;
4982 if (tsc_delta < 0)
4983 mark_tsc_unstable("KVM discovered backwards TSC");
arch/x86/kernel/tsc.c
1206 void mark_tsc_unstable(char *reason)
1207 {
1208 if (tsc_unstable)
1209 return;
1210
1211 tsc_unstable = 1;
1212 if (using_native_sched_clock())
1213 clear_sched_clock_stable();
--> 1214 disable_sched_clock_irqtime();
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
kernel/jump_label.c
245 void static_key_disable(struct static_key *key)
246 {
247 cpus_read_lock();
^^^^^^^^^^^^^^^^
This lock has a might_sleep() in it which triggers the static checker
warning.
248 static_key_disable_cpuslocked(key);
249 cpus_read_unlock();
250 }
Let revert this change for now as {disable,enable}_sched_clock_irqtime
are used in many places, as pointed out by Sean, including the following:
The code path in clocksource_watchdog():
clocksource_watchdog()
|
-> spin_lock(&watchdog_lock);
|
-> __clocksource_unstable()
|
-> clocksource.mark_unstable() == tsc_cs_mark_unstable()
|
-> disable_sched_clock_irqtime()
And the code path in sched_clock_register():
/* Cannot register a sched_clock with interrupts on */
local_irq_save(flags);
...
/* Enable IRQ time accounting if we have a fast enough sched_clock() */
if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
enable_sched_clock_irqtime();
local_irq_restore(flags);
[ lkp@intel.com: reported a build error in the prev version ]
[ mingo: cherry-picked it over into sched/urgent ]
Closes: https://lore.kernel.org/kvm/37a79ba3-9ce0-479c-a5b0-2bd75d573ed3@stanley.mountain/
Fixes: 8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Sean Christopherson <seanjc@google.com>
Debugged-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250205032438.14668-1-laoar.shao@gmail.com
Since CPU time accounting is a performance-critical path, let's define sched_clock_irqtime as a static key to minimize potential overhead. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20250103022409.2544-2-laoar.shao@gmail.com
In extreme test scenarios:
the 14th field utime in /proc/xx/stat is greater than sum_exec_runtime,
utime = 18446744073709518790 ns, rtime = 135989749728000 ns
In cputime_adjust() process, stime is greater than rtime due to
mul_u64_u64_div_u64() precision problem.
before call mul_u64_u64_div_u64(),
stime = 175136586720000, rtime = 135989749728000, utime = 1416780000.
after call mul_u64_u64_div_u64(),
stime = 135989949653530
unsigned reversion occurs because rtime is less than stime.
utime = rtime - stime = 135989749728000 - 135989949653530
= -199925530
= (u64)18446744073709518790
Trigger condition:
1). User task run in kernel mode most of time
2). ARM64 architecture
3). TICK_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
Fix mul_u64_u64_div_u64() conversion precision by reset stime to rtime
Fixes: 3dc167ba5729 ("sched/cputime: Improve cputime_adjust()")
Signed-off-by: Zheng Zucheng <zhengzucheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20240726023235.217771-1-zhengzucheng@huawei.com
Do a spell-checking pass. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
The generic vtime_task_switch() implementation gets built only if __ARCH_HAS_VTIME_TASK_SWITCH is not defined, but requires an architecture to implement arch_vtime_task_switch() callback at the same time, which is confusing. Further, arch_vtime_task_switch() is implemented for 32-bit PowerPC architecture only and vtime_task_switch() generic variant is rather superfluous. Simplify the whole vtime_task_switch() wiring by moving the existing generic implementation to PowerPC. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2cb6e3caada93623f6d4f78ad938ac6cd0e2fda8.1712760275.git.agordeev@linux.ibm.com
The archs that use cputime_to_nsecs() internally provide their own definition and don't need the fallback. cputime_to_usecs() unused except in this fallback, and is not defined anywhere. This removes the final remnant of the cputime_t code from the kernel. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/20221220070705.2958959-1-npiggin@gmail.com
4feee7d1260 previously added per-task forced idle accounting. This patch extends this to also include cgroups. rstat is used for cgroup accounting, except for the root, which uses kcpustat in order to bypass the need for doing an rstat flush when reading root stats. Only cgroup v2 is supported. Similar to the task accounting, the cgroup accounting requires that schedstats is enabled. Signed-off-by: Josh Don <joshdon@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lkml.kernel.org/r/20220629211426.3329954-1-joshdon@google.com
Similarly to kernel/sched/build_utility.c, collect all 'scheduling policy' related
source code files into kernel/sched/build_policy.c:
kernel/sched/idle.c
kernel/sched/rt.c
kernel/sched/cpudeadline.c
kernel/sched/pelt.c
kernel/sched/cputime.c
kernel/sched/deadline.c
With the exception of fair.c, which we continue to build as a separate file
for build efficiency and parallelism reasons.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Pull scheduler updates from Borislav Petkov:
"Mostly minor things this time; some highlights:
- core-sched: Add 'Forced Idle' accounting; this allows to track how
much CPU time is 'lost' due to core scheduling constraints.
- psi: Fix for MEM_FULL; a task running reclaim would be counted as a
runnable task and prevent MEM_FULL from being reported.
- cpuacct: Long standing fixes for some cgroup accounting issues.
- rt: Bandwidth timer could, under unusual circumstances, be failed
to armed, leading to indefinite throttling."
[ Description above by Peter Zijlstra ]
* tag 'sched_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Replace CFS internal cpu_util() with cpu_util_cfs()
sched/fair: Cleanup task_util and capacity type
sched/rt: Try to restart rt period timer when rt runtime exceeded
sched/fair: Document the slow path and fast path in select_task_rq_fair
sched/fair: Fix per-CPU kthread and wakee stacking for asym CPU capacity
sched/fair: Fix detection of per-CPU kthreads waking a task
sched/cpuacct: Make user/system times in cpuacct.stat more precise
sched/cpuacct: Fix user/system in shown cpuacct.usage*
cpuacct: Convert BUG_ON() to WARN_ON_ONCE()
cputime, cpuacct: Include guest time in user time in cpuacct.stat
psi: Fix PSI_MEM_FULL state when tasks are in memstall and doing reclaim
sched/core: Forced idle accounting
psi: Add a missing SPDX license header
psi: Remove repeated verbose comment
getrusage(RUSAGE_THREAD) with nohz_full may return shorter utime/stime than the actual time. task_cputime_adjusted() snapshots utime and stime and then adjust their sum to match the scheduler maintained cputime.sum_exec_runtime. Unfortunately in nohz_full, sum_exec_runtime is only updated once per second in the worst case, causing a discrepancy against utime and stime that can be updated anytime by the reader using vtime. To fix this situation, perform an update of cputime.sum_exec_runtime when the cputime snapshot reports the task as actually running while the tick is disabled. The related overhead is then contained within the relevant situations. Reported-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by: Phil Auld <pauld@redhat.com> Link: https://lore.kernel.org/r/20211026141055.57358-3-frederic@kernel.org