linux.git/kernel/sched/core.c, branch v4.4-rc1

Merge branch 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

2015-11-05T22:51:32+00:00

Pull cgroup updates from Tejun Heo:
 "The cgroup core saw several significant updates this cycle:

   - percpu_rwsem for threadgroup locking is reinstated.  This was
     temporarily dropped due to down_write latency issues.  Oleg's
     rework of percpu_rwsem which is scheduled to be merged in this
     merge window resolves the issue.

   - On the v2 hierarchy, when controllers are enabled and disabled, all
     operations are atomic and can fail and revert cleanly.  This allows
     ->can_attach() failure which is necessary for cpu RT slices.

   - Tasks now stay associated with the original cgroups after exit
     until released.  This allows tracking resources held by zombies
     (e.g.  pids) and makes it easy to find out where zombies came from
     on the v2 hierarchy.  The pids controller was broken before these
     changes as zombies escaped the limits; unfortunately, updating this
     behavior required too many invasive changes and I don't think it's
     a good idea to backport them, so the pids controller on 4.3, the
     first version which included the pids controller, will stay broken
     at least until I'm sure about the cgroup core changes.

   - Optimization of a couple common tests using static_key"

* 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (38 commits)
  cgroup: fix race condition around termination check in css_task_iter_next()
  blkcg: don't create "io.stat" on the root cgroup
  cgroup: drop cgroup__DEVEL__legacy_files_on_dfl
  cgroup: replace error handling in cgroup_init() with WARN_ON()s
  cgroup: add cgroup_subsys->free() method and use it to fix pids controller
  cgroup: keep zombies associated with their original cgroups
  cgroup: make css_set_rwsem a spinlock and rename it to css_set_lock
  cgroup: don't hold css_set_rwsem across css task iteration
  cgroup: reorganize css_task_iter functions
  cgroup: factor out css_set_move_task()
  cgroup: keep css_set and task lists in chronological order
  cgroup: make cgroup_destroy_locked() test cgroup_is_populated()
  cgroup: make css_sets pin the associated cgroups
  cgroup: relocate cgroup_[try]get/put()
  cgroup: move check_for_release() invocation
  cgroup: replace cgroup_has_tasks() with cgroup_is_populated()
  cgroup: make cgroup->nr_populated count the number of populated css_sets
  cgroup: remove an unused parameter from cgroup_task_migrate()
  cgroup: fix too early usage of static_branch_disable()
  cgroup: make cgroup_update_dfl_csses() migrate all target processes atomically
  ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-11-04T02:03:50+00:00

Pull scheduler changes from Ingo Molnar:
 "The main changes in this cycle were:

   - sched/fair load tracking fixes and cleanups (Byungchul Park)

   - Make load tracking frequency scale invariant (Dietmar Eggemann)

   - sched/deadline updates (Juri Lelli)

   - stop machine fixes, cleanups and enhancements for bugs triggered by
     CPU hotplug stress testing (Oleg Nesterov)

   - scheduler preemption code rework: remove PREEMPT_ACTIVE and related
     cleanups (Peter Zijlstra)

   - Rework the sched_info::run_delay code to fix races (Peter Zijlstra)

   - Optimize per entity utilization tracking (Peter Zijlstra)

   - ... misc other fixes, cleanups and smaller updates"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS
  sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop()
  sched: Start stopper early
  stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark()
  stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark()
  stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled
  stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works()
  stop_machine: Ensure that a queued callback will be called before cpu_stop_park()
  sched/x86: Fix typo in __switch_to() comments
  sched/core: Remove a parameter in the migrate_task_rq() function
  sched/core: Drop unlikely behind BUG_ON()
  sched/core: Fix task and run queue sched_info::run_delay inconsistencies
  sched/numa: Fix task_tick_fair() from disabling numa_balancing
  sched/core: Add preempt_count invariant check
  sched/core: More notrace annotations
  sched/core: Kill PREEMPT_ACTIVE
  sched/core, sched/x86: Kill thread_info::saved_preempt_count
  sched/core: Simplify preempt_count tests
  sched/core: Robustify preemption leak checks
  sched/core: Stop setting PREEMPT_ACTIVE
  ...

Merge branch 'linus' into core/rcu, to fix up a semantic conflict

2015-10-28T12:17:20+00:00

Signed-off-by: Ingo Molnar

sched/core: Add missing lockdep_unpin() annotations

2015-10-23T10:02:10+00:00

Luca and Wanpeng reported two missing annotations that led to
false lockdep complaints. Add the missing annotations.

Reported-by: Luca Abeni 
Reported-by: Wanpeng Li 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Juri Lelli 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: cbce1a686700 ("sched,lockdep: Employ lock pinning")
Link: http://lkml.kernel.org/r/20151023095008.GY17308@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar

sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS

2015-10-20T08:25:57+00:00

If CONFIG_CPUSETS=n then "case cpuset" changes the state and runs
the already failed for_each_cpu() loop again for no reason.

Signed-off-by: Oleg Nesterov 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Andrew Morton 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Tejun Heo 
Cc: Thomas Gleixner 
Cc: Vitaly Kuznetsov 
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151010185315.GA24100@redhat.com
Signed-off-by: Ingo Molnar

sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop()

2015-10-20T08:25:56+00:00

The cpu_active() tests are not fundamentally part of stop_two_cpus(),
move then into the scheduler where they belong.

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Andrew Morton 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Ingo Molnar

sched: Start stopper early

2015-10-20T08:25:55+00:00

Ensure the stopper thread is active 'early', because the load balancer
pretty much assumes that its available. And when 'online && active' the
load-balancer is fully available.

Not only the numa balancing stop_two_cpus() caller relies on it, but
also the self migration stuff does, and at CPU_ONLINE time the cpu
really is 'free' to run anything.

Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Oleg Nesterov 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Andrew Morton 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Tejun Heo 
Cc: Thomas Gleixner 
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151009160054.GA10176@redhat.com
Signed-off-by: Ingo Molnar

Merge branch 'sched/urgent' into sched/core, to pick up fixes and resolve conflicts

2015-10-20T08:18:16+00:00

Conflicts:
	kernel/sched/fair.c

Signed-off-by: Ingo Molnar

nohz: Revert "nohz: Set isolcpus when nohz_full is set"

2015-10-20T08:13:36+00:00

This reverts:

  8cb9764fc88b ("nohz: Set isolcpus when nohz_full is set")

We assumed that full-nohz users always want scheduler isolation on full
dynticks CPUs, therefore we included full-nohz CPUs on cpu_isolated_map.

This means that tasks run by default on CPUs outside the nohz_full range
unless their affinity is explicity overwritten.

This suits pure isolation workloads but when the machine is needed to
run common workloads, the available sets of CPUs to run common tasks
becomes reduced.

We reach an extreme case when CONFIG_NO_HZ_FULL_ALL is enabled as it
leaves only CPU 0 for non-isolation tasks, which makes people think that
their supercomputer regressed to 90's UP - which is true in a sense.

Some full-nohz users appear to be interested in running normal workloads
either before or after an isolation workload. Full-nohz isn't optimized
toward normal workloads but it's still better than UP performance.

We are reaching a limitation in kernel presets here. Lets revert this
cpu_isolated_map inclusion and let userspace do its own scheduler
isolation using cpusets or explicit affinity settings.

Reported-by: Ingo Molnar 
Reported-by: Mike Galbraith 
Signed-off-by: Frederic Weisbecker 
Signed-off-by: Peter Zijlstra (Intel) 
Acked-by: Thomas Gleixner 
Cc: Alexey Dobriyan 
Cc: Andrew Morton 
Cc: Chris Metcalf 
Cc: Christoph Lameter 
Cc: Dave Jones 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Oleg Nesterov 
Cc: Paul E . McKenney 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Link: http://lkml.kernel.org/r/1444663283-30068-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

2015-10-19T08:09:54+00:00

Pull RCU updates from Paul E. McKenney:

  - Miscellaneous fixes. (Paul E. McKenney, Boqun Feng, Oleg Nesterov, Patrick Marlier)

  - Improvements to expedited grace periods. (Paul E. McKenney)

  - Performance improvements to and locktorture tests for percpu-rwsem.
    (Oleg Nesterov, Paul E. McKenney)

  - Torture-test changes. (Paul E. McKenney, Davidlohr Bueso)

  - Documentation updates. (Paul E. McKenney)

Signed-off-by: Ingo Molnar