linux.git/kernel/printk/nbcon.c, branch v6.18

panic: use angle-bracket include for panic.h

2025-09-14T00:32:54+00:00

Replace quoted includes of panic.h with `#include ` for
consistency across the kernel.

Link: https://lkml.kernel.org/r/20250829051312.33773-1-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang 
Reviewed-by: John Ogness 
Reviewed-by: Petr Mladek 
Cc: Qianqiang Liu 
Cc: Sergey Senozhatsky 
Cc: Steven Rostedt 
Signed-off-by: Andrew Morton

panic/printk: replace other_cpu_in_panic() with panic_on_other_cpu()

2025-09-14T00:32:52+00:00

The helper other_cpu_in_panic() duplicated logic already provided by
panic_on_other_cpu().

Remove other_cpu_in_panic() and update all users to call
panic_on_other_cpu() instead.

This removes redundant code and makes panic handling consistent.

Link: https://lkml.kernel.org/r/20250825022947.1596226-9-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang 
Cc: Anna Schumaker 
Cc: Baoquan He 
Cc: "Darrick J. Wong" 
Cc: Dave Young 
Cc: Doug Anderson 
Cc: "Guilherme G. Piccoli" 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Jason Gunthorpe 
Cc: Joanthan Cameron 
Cc: Joel Granados 
Cc: John Ogness 
Cc: Kees Cook 
Cc: Li Huafei 
Cc: "Luck, Tony" 
Cc: Luo Gengkun 
Cc: Max Kellermann 
Cc: Nam Cao 
Cc: oushixiong 
Cc: Petr Mladek 
Cc: Qianqiang Liu 
Cc: Sergey Senozhatsky 
Cc: Sohil Mehta 
Cc: Steven Rostedt 
Cc: Tejun Heo 
Cc: Thomas Gleinxer 
Cc: Thomas Zimemrmann 
Cc: Thorsten Blum 
Cc: Ville Syrjala 
Cc: Vivek Goyal 
Cc: Yicong Yang 
Cc: Yunhui Cui 
Cc: Yury Norov (NVIDIA) 
Signed-off-by: Andrew Morton

panic/printk: replace this_cpu_in_panic() with panic_on_this_cpu()

2025-09-14T00:32:52+00:00

The helper this_cpu_in_panic() duplicated logic already provided by
panic_on_this_cpu().

Remove this_cpu_in_panic() and switch all users to panic_on_this_cpu().

This simplifies the code and avoids having two helpers for the same check.

Link: https://lkml.kernel.org/r/20250825022947.1596226-8-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang 
Cc: Anna Schumaker 
Cc: Baoquan He 
Cc: "Darrick J. Wong" 
Cc: Dave Young 
Cc: Doug Anderson 
Cc: "Guilherme G. Piccoli" 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Jason Gunthorpe 
Cc: Joanthan Cameron 
Cc: Joel Granados 
Cc: John Ogness 
Cc: Kees Cook 
Cc: Li Huafei 
Cc: "Luck, Tony" 
Cc: Luo Gengkun 
Cc: Max Kellermann 
Cc: Nam Cao 
Cc: oushixiong 
Cc: Petr Mladek 
Cc: Qianqiang Liu 
Cc: Sergey Senozhatsky 
Cc: Sohil Mehta 
Cc: Steven Rostedt 
Cc: Tejun Heo 
Cc: Thomas Gleinxer 
Cc: Thomas Zimemrmann 
Cc: Thorsten Blum 
Cc: Ville Syrjala 
Cc: Vivek Goyal 
Cc: Yicong Yang 
Cc: Yunhui Cui 
Cc: Yury Norov (NVIDIA) 
Signed-off-by: Andrew Morton

printk/nbcon: use panic_on_this_cpu() helper

2025-09-14T00:32:52+00:00

nbcon_context_try_acquire() compared panic_cpu directly with
smp_processor_id().  This open-coded check is now provided by
panic_on_this_cpu().

Switch to panic_on_this_cpu() to simplify the code and improve readability.

Link: https://lkml.kernel.org/r/20250825022947.1596226-7-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang 
Cc: Anna Schumaker 
Cc: Baoquan He 
Cc: "Darrick J. Wong" 
Cc: Dave Young 
Cc: Doug Anderson 
Cc: "Guilherme G. Piccoli" 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Jason Gunthorpe 
Cc: Joanthan Cameron 
Cc: Joel Granados 
Cc: John Ogness 
Cc: Kees Cook 
Cc: Li Huafei 
Cc: "Luck, Tony" 
Cc: Luo Gengkun 
Cc: Max Kellermann 
Cc: Nam Cao 
Cc: oushixiong 
Cc: Petr Mladek 
Cc: Qianqiang Liu 
Cc: Sergey Senozhatsky 
Cc: Sohil Mehta 
Cc: Steven Rostedt 
Cc: Tejun Heo 
Cc: Thomas Gleinxer 
Cc: Thomas Zimemrmann 
Cc: Thorsten Blum 
Cc: Ville Syrjala 
Cc: Vivek Goyal 
Cc: Yicong Yang 
Cc: Yunhui Cui 
Cc: Yury Norov (NVIDIA) 
Signed-off-by: Andrew Morton

Merge branch 'rework/fixes' into for-linus

2025-08-04T12:18:01+00:00

printk: nbcon: Allow reacquire during panic

2025-06-17T10:10:29+00:00

If a console printer is interrupted during panic, it will never
be able to reacquire ownership in order to perform and cleanup.
That in itself is not a problem, since the non-panic CPU will
simply quiesce in an endless loop within nbcon_reacquire_nobuf().

However, in this state, platforms that do not support a true NMI
to interrupt the quiesced CPU will not be able to shutdown that
CPU from within panic(). This then causes problems for such as
being unable to load and run a kdump kernel.

Fix this by allowing non-panic CPUs to reacquire ownership using
a direct acquire. Then the non-panic CPUs can successfullyl exit
the nbcon_reacquire_nobuf() loop and the console driver can
perform any necessary cleanup. But more importantly, the CPU is
no longer quiesced and is free to process any interrupts
necessary for panic() to shutdown the CPU.

All other forms of acquire are still not allowed for non-panic
CPUs since it is safer to have them avoid gaining console
ownership that is not strictly necessary.

Reported-by: Michael Kelley 
Closes: https://lore.kernel.org/r/SN6PR02MB4157A4C5E8CB219A75263A17D46DA@SN6PR02MB4157.namprd02.prod.outlook.com
Signed-off-by: John Ogness 
Reviewed-by: Petr Mladek 
Tested-by: Michael Kelley 
Link: https://patch.msgid.link/20250606185549.900611-1-john.ogness@linutronix.de
Signed-off-by: Petr Mladek

printk: Allow to use the printk kthread immediately even for 1st nbcon

2025-06-09T14:44:01+00:00

The kthreads for nbcon consoles are created by nbcon_alloc() at
the beginning of the console registration. But it currently works
only for the 2nd or later nbcon console because the code checks
@printk_kthreads_running.

The kthread for the 1st registered nbcon console is created at the very
end of register_console() by printk_kthreads_check_locked(). As a result,
the entire log is replayed synchronously when the "enabled" message
gets printed. It might block the boot for a long time with a slow serial
console.

Prevent the synchronous flush by creating the kthread even for the 1st
nbcon console when it is safe (kthreads ready and no boot consoles).

Also inform printk() to use the kthread by setting
@printk_kthreads_running. Note that the kthreads already must be
running when it is safe and this is not the 1st nbcon console.

Symmetrically, clear @printk_kthreads_running when the last nbcon
console was unregistered by nbcon_free(). This requires updating
@have_nbcon_console before nbcon_free() gets called.

Note that there is _no_ problem when the 1st nbcon console replaces boot
consoles. In this case, the kthread will be started at the end
of registration after the boot consoles are removed. But the console
does not reply the entire log buffer in this case. Note that
the flag CON_PRINTBUFFER is always cleared when the boot consoles are
removed and vice versa.

Closes: https://lore.kernel.org/r/20250514173514.2117832-1-mcobb@thegoodpenguin.co.uk
Tested-by: Michael Cobb 
Reviewed-by: John Ogness 
Link: https://patch.msgid.link/20250604142045.253301-1-pmladek@suse.com
Signed-off-by: Petr Mladek

printk: nbcon: Assign nice -20 for printing threads

2024-09-04T13:56:33+00:00

It is important that console printing threads are scheduled
shortly after a printk call and with generous runtime budgets.

Signed-off-by: John Ogness 
Reviewed-by: Petr Mladek 
Link: https://lore.kernel.org/r/20240904120536.115780-17-john.ogness@linutronix.de
Signed-off-by: Petr Mladek

printk: nbcon: Show replay message on takeover

2024-09-04T13:56:32+00:00

An emergency or panic context can takeover console ownership
while the current owner was printing a printk message. The
atomic printer will re-print the message that the previous
owner was printing. However, this can look confusing to the
user and may even seem as though a message was lost.

  [3430014.1
  [3430014.181123] usb 1-2: Product: USB Audio

Add a new field @nbcon_prev_seq to struct console to track
the sequence number to print that was assigned to the previous
console owner. If this matches the sequence number to print
that the current owner is assigned, then a takeover must have
occurred. In this case, print an additional message to inform
the user that the previous message is being printed again.

  [3430014.1
  ** replaying previous printk message **
  [3430014.181123] usb 1-2: Product: USB Audio

Signed-off-by: John Ogness 
Reviewed-by: Petr Mladek 
Link: https://lore.kernel.org/r/20240904120536.115780-12-john.ogness@linutronix.de
Signed-off-by: Petr Mladek

printk: nbcon: Rely on kthreads for normal operation

2024-09-04T13:56:32+00:00

Once the kthread is running and available
(i.e. @printk_kthreads_running is set), the kthread becomes
responsible for flushing any pending messages which are added
in NBCON_PRIO_NORMAL context. Namely the legacy
console_flush_all() and device_release() no longer flush the
console. And nbcon_atomic_flush_pending() used by
nbcon_cpu_emergency_exit() no longer flushes messages added
after the emergency messages.

The console context is safe when used by the kthread only when
one of the following conditions are true:

  1. Other caller acquires the console context with
     NBCON_PRIO_NORMAL with preemption disabled. It will
     release the context before rescheduling.

  2. Other caller acquires the console context with
     NBCON_PRIO_NORMAL under the device_lock.

  3. The kthread is the only context which acquires the console
     with NBCON_PRIO_NORMAL.

This is satisfied for all atomic printing call sites:

nbcon_legacy_emit_next_record() (#1)

nbcon_atomic_flush_pending_con() (#1)

nbcon_device_release() (#2)

It is even double guaranteed when @printk_kthreads_running
is set because then _only_ the kthread will print for
NBCON_PRIO_NORMAL. (#3)

Signed-off-by: John Ogness 
Reviewed-by: Petr Mladek 
Link: https://lore.kernel.org/r/20240904120536.115780-10-john.ogness@linutronix.de
Signed-off-by: Petr Mladek