linux.git/kernel/power/swap.c, branch v2.6.27

removed unused #include 's

2008-08-23T19:14:12+00:00

This patch lets the files using linux/version.h match the files that
#include it.

Signed-off-by: Adrian Bunk 
Signed-off-by: Linus Torvalds

Hibernation: Update messages

2008-02-01T23:30:55+00:00

Make hibernation messages start with one common prefix "PM: " and use
the word "hibernation" in the messages as a synonym of "suspend to
disk".

Turn some KERN_INFO messages into debug ones.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Signed-off-by: Len Brown

Hibernation: Remove unnecessary variable declaration

2008-02-01T23:30:55+00:00

Remove the unnecessary extern declaration of resume_file[]
from kernel/power/swap.c .

Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Signed-off-by: Len Brown

swsusp: introduce restore platform operations

2007-07-19T17:04:42+00:00

At least on some machines it is necessary to prepare the ACPI firmware for the
restoration of the system memory state from the hibernation image if the
"platform" mode of hibernation has been used.  Namely, in that cases we need
to disable the GPEs before replacing the "boot" kernel with the "frozen"
kernel (cf.  http://bugzilla.kernel.org/show_bug.cgi?id=7887).  After the
restore they will be re-enabled by hibernation_ops->finish(), but if the
restore fails, they have to be re-enabled by the restore code explicitly.

For this purpose we can introduce two additional hibernation operations,
called pre_restore() and restore_cleanup() and call them from the restore code
path.  Still, they should be called if the "platform" mode of hibernation has
been used, so we need to pass the information about the hibernation mode from
the "frozen" kernel to the "boot" kernel in the image header.

Apparently, we can't drop the disabling of GPEs before the restore because of
Bug #7887 .   We also can't do it unconditionally, because the GPEs wouldn't
have been enabled after a successful restore if the suspend had been done in
the 'shutdown' or 'reboot' mode.

In principle we could (and probably should) unconditionally disable the GPEs
before each snapshot creation *and* before the restore, but then we'd have to
unconditionally enable them after the snapshot creation as well as after the
restore (or restore failure)   Still, for this purpose we'd need to modify
acpi_enter_sleep_state_prep() and acpi_leave_sleep_state() and we'd have to
introduce some mechanism synchronizing the disablind/enabling of the GPEs with
the device drivers' .suspend()/.resume() routines and with
disable_/enable_nonboot_cpus().   However, this would have affected the
suspend (ie.  s2ram) code as well as the hibernation, which I'd like to avoid
in this patch series.

Signed-off-by: Rafael J. Wysocki 
Cc: Nigel Cunningham 
Cc: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

power: Fix sizeof(PAGE_SIZE) typo

2007-05-24T03:14:14+00:00

Fix sizeof(PAGE_SIZE) typo.  It should be just PAGE_SIZE for zeroing the
swsusp_header.

Signed-off-by: OGAWA Hirofumi 
Signed-off-by: OGAWA Hirofumi 
Cc: Pavel Machek 
Cc: "Rafael J. Wysocki" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

header cleaning: don't include smp_lock.h when not used

2007-05-08T18:15:07+00:00

Remove includes of  where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

swsusp: use rbtree for tracking allocated swap

2007-05-07T19:12:59+00:00

Make swsusp use extents instead of a bitmap to trace swap pages allocated
for saving the image (the tracking is only needed in case there's an error,
so that the allocated swap pages can be released).

This should allow us to reduce the memory usage, practically always, and
improve performance.

Signed-off-by: Rafael J. Wysocki 
Cc: Nigel Cunningham 
Cc: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] x86-64: do not use virt_to_page on kernel data address

2007-05-02T17:27:07+00:00

o virt_to_page() call should be used on kernel linear addresses and not
  on kernel text and data addresses. Swsusp code uses it on kernel data
  (statically allocated swsusp_header).

o Allocate swsusp_header dynamically so that virt_to_page() can be used
  safely.

o I am changing this because in next few patches, __pa() on x86_64 will
  no longer support kernel text and data addresses and hibernation breaks.

Signed-off-by: Vivek Goyal 
Signed-off-by: Andi Kleen

[PATCH] swsusp: Do not fail if resume device is not set

2007-01-06T07:55:22+00:00

In the kernels later than 2.6.19 there is a regression that makes swsusp
fail if the resume device is not explicitly specified.

It can be fixed by adding an additional parameter to
mm/swapfile.c:swap_type_of() allowing us to pass the (struct block_device
*) corresponding to the first available swap back to the caller.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] swsusp: Fix labels

2006-12-07T16:39:28+00:00

Move all labels in the swsusp code to the second column, so that they won't
fool diff -p.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Cc: Nigel Cunningham 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds