Pull core irq updates from Thomas Gleixner:
 "Updates from the irq departement:

   - Update the interrupt spreading code so it handles numa node with
     different CPU counts properly.

   - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
     ranges.

   - Conversion of all alloc_fwnode() users to use physical addresses
     instead of virtual addresses so the virtual addresses are not
     leaked. The physical address is sufficient to identify the
     associated interrupt chip.

   - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.

   - Enforce interrupt threading at compile time if RT is enabled.

   - Small updates and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
  irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
  irqdomain: Add the missing assignment of domain->fwnode for named fwnode
  irqchip/mmp: Coexist with GIC root IRQ controller
  irqchip/mmp: Mask off interrupts from other cores
  irqchip/mmp: Add missing chained_irq_{enter,exit}()
  irqchip/mmp: Do not use of_address_to_resource() to get mux regs
  irqchip/meson-gpio: Add support for meson sm1 SoCs
  dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
  genirq/affinity: Remove const qualifier from node_to_cpumask argument
  genirq/affinity: Spread vectors on node according to nr_cpu ratio
  genirq/affinity: Improve __irq_build_affinity_masks()
  irqchip: Remove dev_err() usage after platform_get_irq()
  irqchip: Add include guard to irq-partition-percpu.h
  irqchip/mmp: Do not call irq_set_default_host() on DT platforms
  irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
  irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
  irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
  irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
  irqchip/gic-v3: Add EPPI range support
  ...

Switch force_irqthreads from a boot time modifiable variable to a compile
time constant when CONFIG_PREEMPT_RT is enabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190816160923.12855-1-bigeasy@linutronix.de

Returning the pointer that was passed in allows us to write
slightly more idiomatic code.  Convert a few users.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190704221323.24290-1-willy@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull x96 apic updates from Thomas Gleixner:
 "Updates for the x86 APIC interrupt handling and APIC timer:

   - Fix a long standing issue with spurious interrupts which was caused
     by the big vector management rework a few years ago. Robert Hodaszi
     provided finally enough debug data and an excellent initial failure
     analysis which allowed to understand the underlying issues.

     This contains a change to the core interrupt management code which
     is required to handle this correctly for the APIC/IO_APIC. The core
     changes are NOOPs for most architectures except ARM64. ARM64 is not
     impacted by the change as confirmed by Marc Zyngier.

   - Newer systems allow to disable the PIT clock for power saving
     causing panic in the timer interrupt delivery check of the IO/APIC
     when the HPET timer is not enabled either. While the clock could be
     turned on this would cause an endless whack a mole game to chase
     the proper register in each affected chipset.

     These systems provide the relevant frequencies for TSC, CPU and the
     local APIC timer via CPUID and/or MSRs, which allows to avoid the
     PIT/HPET based calibration. As the calibration code is the only
     usage of the legacy timers on modern systems and is skipped anyway
     when the frequencies are known already, there is no point in
     setting up the PIT and actually checking for the interrupt delivery
     via IO/APIC.

     To achieve this on a wide variety of platforms, the CPUID/MSR based
     frequency readout has been made more robust, which also allowed to
     remove quite some workarounds which turned out to be not longer
     required. Thanks to Daniel Drake for analysis, patches and
     verification"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Seperate unused system vectors from spurious entry again
  x86/irq: Handle spurious interrupt after shutdown gracefully
  x86/ioapic: Implement irq_get_irqchip_state() callback
  genirq: Add optional hardware synchronization for shutdown
  genirq: Fix misleading synchronize_irq() documentation
  genirq: Delay deactivation in free_irq()
  x86/timer: Skip PIT initialization on modern chipsets
  x86/apic: Use non-atomic operations when possible
  x86/apic: Make apic_bsp_setup() static
  x86/tsc: Set LAPIC timer period to crystal clock frequency
  x86/apic: Rename 'lapic_timer_frequency' to 'lapic_timer_period'
  x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency

free_irq() ensures that no hardware interrupt handler is executing on a
different CPU before actually releasing resources and deactivating the
interrupt completely in a domain hierarchy.

But that does not catch the case where the interrupt is on flight at the
hardware level but not yet serviced by the target CPU. That creates an
interesing race condition:

   CPU 0                  CPU 1               IRQ CHIP

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     release_resources()
                          do_IRQ()
                            -> resources are not available

That might be harmless and just trigger a spurious interrupt warning, but
some interrupt chips might get into a wedged state.

Utilize the existing irq_get_irqchip_state() callback for the
synchronization in free_irq().

synchronize_hardirq() is not using this mechanism as it might actually
deadlock unter certain conditions, e.g. when called with interrupts
disabled and the target CPU is the one on which the synchronization is
invoked. synchronize_irq() uses it because that function cannot be called
from non preemtible contexts as it might sleep.

No functional change intended and according to Marc the existing GIC
implementations where the driver supports the callback should be able
to cope with that core change. Famous last words.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de

The function might sleep, so it cannot be called from interrupt
context. Not even with care.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de

When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:

There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.

Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.

This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.

Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de

Pull printk updates from Petr Mladek:

 - Allow state reset of printk_once() calls.

 - Prevent crashes when dereferencing invalid pointers in vsprintf().
   Only the first byte is checked for simplicity.

 - Make vsprintf warnings consistent and inlined.

 - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
   modifiers.

 - Some clean up of vsprintf and test_printf code.

* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Make function pointer_string static
  vsprintf: Limit the length of inlined error messages
  vsprintf: Avoid confusion between invalid address and value
  vsprintf: Prevent crash when dereferencing invalid pointers
  vsprintf: Consolidate handling of unknown pointer specifiers
  vsprintf: Factor out %pO handler as kobject_string()
  vsprintf: Factor out %pV handler as va_format()
  vsprintf: Factor out %p[iI] handler as ip_addr_string()
  vsprintf: Do not check address of well-known strings
  vsprintf: Consistent %pK handling for kptr_restrict == 0
  vsprintf: Shuffle restricted_pointer()
  printk: Tie printk_once / printk_deferred_once into .data.once for reset
  treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  lib/test_printf: Switch to bitmap_zalloc()

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>

When irq_set_affinity_notifier() replaces the notifier, then the
reference count on the old notifier is dropped which causes it to be
freed. But nothing ensures that the old notifier is not longer queued
in the work list. If it is queued this results in a use after free and
possibly in work list corruption.

Ensure that the work is canceled before the reference is dropped.

Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: marc.zyngier@arm.com
Link: https://lkml.kernel.org/r/1553439424-6529-1-git-send-email-psodagud@codeaurora.org