linux.git/kernel/irq/manage.c, branch v4.5

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-01-12T02:28:06+00:00

Pull irq updates from Thomas Gleixner:
 "The irq department provides:

   - Support for MSI to wire bridges and a first user of it

   - More ACPI support for ARM/GIC

   - A new TS-4800 interrupt controller driver

   - RCU based free of interrupt descriptors to support the upcoming
     Intel VMD technology without introducing a locking nightmare

   - The usual pile of fixes and updates to drivers and core code"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  irqchip/omap-intc: Add support for spurious irq handling
  irqchip/zevio: Use irq_data_get_chip_type() helper
  irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler
  irqchip/ts4800: Add TS-4800 interrupt controller
  irqchip/ts4800: Add documentation for TS-4800 interrupt controller
  irq/platform-MSI: Increase the maximum MSIs the MSI framework can support
  irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges
  irqchip/bcm2836: Make code more readable
  irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR
  irqchip/bcm2836: Add SMP support for the 2836
  irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers
  irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support
  irqchip/gic-v2m: Refactor to prepare for ACPI support
  irqdomain: Introduce is_fwnode_irqchip helper
  acpi: pci: Setup MSI domain for ACPI based pci devices
  genirq/msi: Export functions to allow MSI domains in modules
  irqchip/mbigen: Implement the mbigen irq chip operation functions
  irqchip/mbigen: Create irq domain for each mbigen device
  irqchip/mgigen: Add platform device driver for mbigen device
  dt-bindings: Documents the mbigen bindings
  ...

genirq: Prevent chip buslock deadlock

2015-12-14T08:45:06+00:00

If a interrupt chip utilizes chip->buslock then free_irq() can
deadlock in the following way:

CPU0				CPU1
				interrupt(X) (Shared or spurious)
free_irq(X)			interrupt_thread(X)
chip_bus_lock(X)
				   irq_finalize_oneshot(X)
				     chip_bus_lock(X)
synchronize_irq(X)
	
synchronize_irq() waits for the interrupt thread to complete,
i.e. forever.

Solution is simple: Drop chip_bus_lock() before calling
synchronize_irq() as we do with the irq_desc lock. There is nothing to
be protected after the point where irq_desc lock has been released.

This adds chip_bus_lock/unlock() to the remove_irq() code path, but
that's actually correct in the case where remove_irq() is called on
such an interrupt. The current users of remove_irq() are not affected
as none of those interrupts is on a chip which requires buslock.

Reported-by: Fredrik Markström 
Signed-off-by: Thomas Gleixner 
Cc: stable@vger.kernel.org

genirq: Implement irq_percpu_is_enabled()

2015-12-08T11:53:29+00:00

Certain interrupt controller drivers have a register set that does not
make it easy to save/restore the mask of enabled/disabled interrupts
at suspend/resume time. At resume time, such drivers rely on the core
kernel irq subsystem to tell whether such or such interrupt is enabled
or not, in order to restore the proper state in the interrupt
controller register.

While the irqd_irq_disabled() provides the relevant information for
global interrupts, there is no similar function to query the
enabled/disabled state of a per-CPU interrupt.

Therefore, this commit complements the percpu_irq API with an
irq_percpu_is_enabled() function.

[ tglx: Simplified the implementation and added kerneldoc ]

Signed-off-by: Thomas Petazzoni 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Tawfik Bayouk 
Cc: Nadav Haklai 
Cc: Lior Amsalem 
Cc: Andrew Lunn 
Cc: Sebastian Hesselbarth 
Cc: Gregory Clement 
Cc: Jason Cooper 
Cc: Marc Zyngier 
Link: http://lkml.kernel.org/r/1445347435-2333-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Thomas Gleixner

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2015-11-04T17:41:05+00:00

Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...

genirq: Add flag to force mask in disable_irq[_nosync]()

2015-10-11T09:33:42+00:00

If an irq chip does not implement the irq_disable callback, then we
use a lazy approach for disabling the interrupt. That means that the
interrupt is marked disabled, but the interrupt line is not
immediately masked in the interrupt chip. It only becomes masked if
the interrupt is raised while it's marked disabled. We use this to avoid
possibly expensive mask/unmask operations for common case operations.

Unfortunately there are devices which do not allow the interrupt to be
disabled easily at the device level. They are forced to use
disable_irq_nosync(). This can result in taking each interrupt twice.

Instead of enforcing the non lazy mode on all interrupts of a irq
chip, provide a settings flag, which can be set by the driver for that
particular interrupt line.

Reported-and-tested-by: Duc Dang 
Signed-off-by: Thomas Gleixner 
Cc: Marc Zyngier 
Cc: Jason Cooper 
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1510092348370.6097@nanos

genirq: Make irq_set_vcpu_affinity available for CONFIG_SMP=n

2015-10-09T20:47:27+00:00

irq_set_vcpu_affinity() is needed when CONFIG_SMP=n, so move the
definition out of "#ifdef CONFIG_SMP"

Suggested-by: Paolo Bonzini 
Signed-off-by: Feng Wu 
Cc: jiang.liu@linux.intel.com
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1443860438-144926-1-git-send-email-feng.wu@intel.com
Signed-off-by: Thomas Gleixner

irq: Export per-cpu irq allocation and de-allocation functions

2015-09-29T18:51:40+00:00

Some drivers might use the per-cpu interrupts and still might be built as a
module. Export request_percpu_irq an free_percpu_irq to these user, which
also make it consistent with enable/disable_percpu_irq that were exported.

Reported-by: Willy Tarreau 
Signed-off-by: Maxime Ripard 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: David S. Miller

genirq: Fix the documentation of request_percpu_irq

2015-09-29T18:51:40+00:00

The documentation of request_percpu_irq is confusing and suggest that the
interrupt is not enabled at all, while it is actually enabled on the local
CPU.

Clarify that.

Signed-off-by: Maxime Ripard 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: David S. Miller

genirq: Handle force threading of irqs with primary and thread handler

2015-09-22T10:39:57+00:00

Force threading of interrupts does not really deal with interrupts
which are requested with a primary and a threaded handler. The current
policy is to leave them alone and let the primary handler run in
interrupt context, but we set the ONESHOT flag for those interrupts as
well.

Kohji Okuno debugged a problem with the SDHCI driver where the
interrupt thread waits for a hardware interrupt to trigger, which can't
work well because the hardware interrupt is masked due to the ONESHOT
flag being set. He proposed to set the ONESHOT flag only if the
interrupt does not provide a thread handler.

Though that does not work either because these interrupts can be
shared. So the other interrupt would rightfully get the ONESHOT flag
set and therefor the same situation would happen again.

To deal with this proper, we need to force thread the primary handler
of such interrupts as well. That means that the primary interrupt
handler is treated as any other primary interrupt handler which is not
marked IRQF_NO_THREAD. The threaded handler becomes a separate thread
so the SDHCI flow logic can be handled gracefully.

The same issue was reported against 4.1-rt.

Reported-and-tested-by: Kohji Okuno 
Reported-By: Michal Smucr 
Reported-and-tested-by: Nathan Sullivan 
Signed-off-by: Thomas Gleixner 
Cc: Sebastian Andrzej Siewior 
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1509211058080.5606@nanos
Signed-off-by: Thomas Gleixner

genirq: Move field 'affinity' from irq_data into irq_common_data

2015-09-16T13:46:49+00:00

Irq affinity mask is per-irq instead of per irqchip, so move it into
struct irq_common_data.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Bjorn Helgaas 
Cc: Benjamin Herrenschmidt 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Jason Cooper 
Cc: Kevin Cernekee 
Cc: Arnd Bergmann 
Link: http://lkml.kernel.org/r/1433303281-27688-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner