linux.git/kernel/irq/manage.c, branch v3.3

genirq: Clear action->thread_mask if IRQ_ONESHOT is not set

2012-03-07T00:46:39+00:00

Xommit ac5637611(genirq: Unmask oneshot irqs when thread was not woken)
fails to unmask when a !IRQ_ONESHOT threaded handler is handled by
handle_level_irq.

This happens because thread_mask is or'ed unconditionally in
irq_wake_thread(), but for !IRQ_ONESHOT interrupts never cleared.  So
the check for !desc->thread_active fails and keeps the interrupt
disabled.

Keep the thread_mask zero for !IRQ_ONESHOT interrupts.

Document the thread_mask magic while at it.

Reported-and-tested-by: Sven Joachim 
Reported-and-tested-by: Stefan Lippers-Hollmann 
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner 
Signed-off-by: Linus Torvalds

genirq: Handle pending irqs in irq_startup()

2012-02-15T10:56:59+00:00

An interrupt might be pending when irq_startup() is called, but the
startup code does not invoke the resend logic. In some cases this
prevents the device from issuing another interrupt which renders the
device non functional.

Call the resend function in irq_startup() to keep things going.

Reported-and-tested-by: Russell King 
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2012-01-08T21:21:22+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)

genirq: Fix race condition when stopping the irq thread

2011-12-02T10:54:24+00:00

In irq_wait_for_interrupt(), the should_stop member is verified before
setting the task's state to TASK_INTERRUPTIBLE and calling schedule().
In case kthread_stop sets should_stop and wakes up the process after
should_stop is checked by the irq thread but before the task's state
is changed, the irq thread might never exit:

kthread_stop                    irq_wait_for_interrupt
------------                    ----------------------

                                 ...
...                              while (!kthread_should_stop()) {
kthread->should_stop = 1;
wake_up_process(k);
wait_for_completion(&kthread->exited);
...
                                     set_current_state(TASK_INTERRUPTIBLE);

                                     ...

                                     schedule();
                                 }

Fix this by checking if the thread should stop after modifying the
task's state.

[ tglx: Simplified it a bit ]

Signed-off-by: Ido Yariv 
Link: http://lkml.kernel.org/r/1322740508-22640-1-git-send-email-ido@wizery.com
Signed-off-by: Thomas Gleixner 
Cc: stable@kernel.org

genirq: Don't allow per cpu interrupts to be suspended

2011-11-17T16:44:04+00:00

The power management functions related to interrupts do not know
(yet) about per-cpu interrupts and end up calling the wrong
low-level methods to enable/disable interrupts.

This leads to all kind of interesting issues (action taken on one
CPU only, updating a refcount which is not used otherwise...).

The workaround for the time being is simply to flag these interrupts
with IRQF_NO_SUSPEND. At least on ARM, these interrupts are actually
dealt with at the architecture level.

Reported-by: Santosh Shilimkar 
Tested-by: Santosh Shilimkar 
Signed-off-by: Marc Zyngier 
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1321446459-31409-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner

Merge branch 'master' into for-next

2011-11-13T19:55:53+00:00

Sync with Linus tree to have 157550ff ("mtd: add GPMI-NAND driver
in the config and Makefile") as I have patch depending on that one.

irq: Fix comment typo ist->is

2011-10-29T19:35:00+00:00

Signed-off-by: Javi Merino 
Signed-off-by: Jiri Kosina

genirq: Fix fatfinered fixup really

2011-10-04T16:43:57+00:00

Putting the argument inside the quote does not really help.

Signed-off-by: Thomas Gleixner

genirq: percpu: allow interrupt type to be set at enable time

2011-10-03T13:35:27+00:00

As request_percpu_irq() doesn't allow for a percpu interrupt to have
its type configured (it is generally impossible to configure it on all
CPUs at once), add a 'type' argument to enable_percpu_irq().

This allows some low-level, board specific init code to be switched to
a generic API.

[ tglx: Added WARN_ON argument ]

Signed-off-by: Marc Zyngier 
Cc: Abhijeet Dharmapurikar 
Signed-off-by: Thomas Gleixner

genirq: Add support for per-cpu dev_id interrupts

2011-10-03T13:35:26+00:00

The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
which are usually used to connect local timers to each core. Each CPU
has its own private interface to the GIC, and only sees the PPIs that
are directly connect to it.

While these timers are separate devices and have a separate interrupt
line to a core, they all use the same IRQ number.

For these devices, request_irq() is not the right API as it assumes
that an IRQ number is visible by a number of CPUs (through the
affinity setting), but makes it very awkward to express that an IRQ
number can be handled by all CPUs, and yet be a different interrupt
line on each CPU, requiring a different dev_id cookie to be passed
back to the handler.

The *_percpu_irq() functions is designed to overcome these
limitations, by providing a per-cpu dev_id vector:

int request_percpu_irq(unsigned int irq, irq_handler_t handler,
		   const char *devname, void __percpu *percpu_dev_id);
void free_percpu_irq(unsigned int, void __percpu *);
int setup_percpu_irq(unsigned int irq, struct irqaction *new);
void remove_percpu_irq(unsigned int irq, struct irqaction *act);
void enable_percpu_irq(unsigned int irq);
void disable_percpu_irq(unsigned int irq);

The API has a number of limitations:
- no interrupt sharing
- no threading
- common handler across all the CPUs

Once the interrupt is requested using setup_percpu_irq() or
request_percpu_irq(), it must be enabled by each core that wishes its
local interrupt to be delivered.

Based on an initial patch by Thomas Gleixner.

Signed-off-by: Marc Zyngier 
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner