linux.git/kernel/irq/internals.h, branch v3.4

Merge branch 'linus' into irq/core

2012-03-13T15:35:16+00:00

Reason: Get upstream fixes integrated before further modifications.

Signed-off-by: Thomas Gleixner

genirq: Get rid of unnecessary IRQTF_DIED flag

2012-03-09T16:19:09+00:00

Currently IRQTF_DIED flag is set when a IRQ thread handler calls do_exit()
But also PF_EXITING per process flag gets set when a thread exits. This
fix eliminates the duplicate by using PF_EXITING flag.

Also, there is a race condition in exit_irq_thread(). In case a thread's
bit is cleared in desc->threads_oneshot (and the IRQ line gets unmasked),
but before IRQTF_DIED flag is set, a new interrupt might come in and set
just cleared bit again, this time forever. This fix throws IRQTF_DIED flag
away, eliminating the race as a result.

[ tglx: Test THREAD_EXITING first as suggested by Oleg ]

Reported-by: Oleg Nesterov 
Signed-off-by: Alexander Gordeev 
Link: http://lkml.kernel.org/r/20120309135958.GD2114@dhcp-26-207.brq.redhat.com
Signed-off-by: Thomas Gleixner

genirq: Handle pending irqs in irq_startup()

2012-02-15T10:56:59+00:00

An interrupt might be pending when irq_startup() is called, but the
startup code does not invoke the resend logic. In some cases this
prevents the device from issuing another interrupt which renders the
device non functional.

Call the resend function in irq_startup() to keep things going.

Reported-and-tested-by: Russell King 
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner

module_param: make bool parameters really bool (core code)

2012-01-12T23:02:18+00:00

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell

genirq: Add support for per-cpu dev_id interrupts

2011-10-03T13:35:26+00:00

The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
which are usually used to connect local timers to each core. Each CPU
has its own private interface to the GIC, and only sees the PPIs that
are directly connect to it.

While these timers are separate devices and have a separate interrupt
line to a core, they all use the same IRQ number.

For these devices, request_irq() is not the right API as it assumes
that an IRQ number is visible by a number of CPUs (through the
affinity setting), but makes it very awkward to express that an IRQ
number can be handled by all CPUs, and yet be a different interrupt
line on each CPU, requiring a different dev_id cookie to be passed
back to the handler.

The *_percpu_irq() functions is designed to overcome these
limitations, by providing a per-cpu dev_id vector:

int request_percpu_irq(unsigned int irq, irq_handler_t handler,
		   const char *devname, void __percpu *percpu_dev_id);
void free_percpu_irq(unsigned int, void __percpu *);
int setup_percpu_irq(unsigned int irq, struct irqaction *new);
void remove_percpu_irq(unsigned int irq, struct irqaction *act);
void enable_percpu_irq(unsigned int irq);
void disable_percpu_irq(unsigned int irq);

The API has a number of limitations:
- no interrupt sharing
- no threading
- common handler across all the CPUs

Once the interrupt is requested using setup_percpu_irq() or
request_percpu_irq(), it must be enabled by each core that wishes its
local interrupt to be delivered.

Based on an initial patch by Thomas Gleixner.

Signed-off-by: Marc Zyngier 
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner

genirq: Remove compat code

2011-03-29T12:48:19+00:00

Signed-off-by: Thomas Gleixner

genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data

2011-03-28T14:55:10+00:00

We really need these flags for some of the interrupt chips. Move it
from internal state to irq_data and provide proper accessors.

Signed-off-by: Thomas Gleixner 
Cc: David Daney

genirq: Provide forced interrupt threading

2011-02-26T10:57:18+00:00

Add a commandline parameter "threadirqs" which forces all interrupts except
those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to
allow retrieving better debug data from crashing interrupt handlers. If
"threadirqs" is not enabled on the kernel command line, then there is no
impact in the interrupt hotpath.

Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after
marking the interrupts which cant be threaded IRQF_NO_THREAD. All
interrupts which have IRQF_TIMER set are implict marked
IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded.

Forced threading hard interrupts also forces all soft interrupt
handling into thread context.

When enabled it might slow down things a bit, but for debugging problems in
interrupt code it's a reasonable penalty as it does not immediately
crash and burn the machine when an interrupt handler is buggy.

Some test results on a Core2Duo machine:

Cache cold run of:
 # time git grep irq_desc

      non-threaded       threaded
 real 1m18.741s          1m19.061s
 user 0m1.874s           0m1.757s
 sys  0m5.843s           0m5.427s

 # iperf -c server
non-threaded
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
threaded
[  3]  0.0-10.0 sec  1.09 GBytes   939 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   937 Mbits/sec

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
LKML-Reference: <20110223234956.772668648@linutronix.de>

genirq: Implement irq_get/put_desc_[bus]locked/unlock()

2011-02-19T11:58:23+00:00

Most of the managing functions get the irq descriptor and lock it -
either with or without buslock. Instead of open coding this over and
over provide a common function to do that.

Signed-off-by: Thomas Gleixner

genirq: Remove real old transition functions

2011-02-19T11:58:23+00:00

These transition helpers are stale for years now. Remove them.

Signed-off-by: Thomas Gleixner