dma_map_sg() may use swiotlb buffer when the kernel command line includes
"swiotlb=force" or the dma_addr is out of dev->dma_mask range.  After
DMA complete the memory moving from device to memory, then user call
dma_sync_sg_for_cpu() to sync with DMA buffer, and copy the original
virtual buffer to other space.

So dma_direct_sync_sg_for_cpu() should use swiotlb physical addr, not
the original physical addr from sg_phys(sg).

dma_direct_sync_sg_for_device() also has the same issue, correct it as
well.

Fixes: 55897af63091("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Don't just check for a swiotlb buffer, but also if buffering might
be required for this particular device.

Fixes: 133d624b1cee ("dma: Introduce dma_max_mapping_size()")
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

If a device doesn't support DMA to a physical address that includes the
encryption bit (currently bit 47, so 48-bit DMA), then the DMA must
occur to unencrypted memory. SWIOTLB is used to satisfy that requirement
if an IOMMU is not active (enabled or configured in passthrough mode).

However, commit fafadcd16595 ("swiotlb: don't dip into swiotlb pool for
coherent allocations") modified the coherent allocation support in
SWIOTLB to use the DMA direct coherent allocation support. When an IOMMU
is not active, this resulted in dma_alloc_coherent() failing for devices
that didn't support DMA addresses that included the encryption bit.

Addressing this requires changes to the force_dma_unencrypted() function
in kernel/dma/direct.c. Since the function is now non-trivial and
SME/SEV specific, update the DMA direct support to add an arch override
for the force_dma_unencrypted() function. The arch override is selected
when CONFIG_AMD_MEM_ENCRYPT is set. The arch override function resides in
the arch/x86/mm/mem_encrypt.c file and forces unencrypted DMA when either
SEV is active or SME is active and the device does not support DMA to
physical addresses that include the encryption bit.

Fixes: fafadcd16595 ("swiotlb: don't dip into swiotlb pool for coherent allocations")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
[hch: moved the force_dma_unencrypted declaration to dma-mapping.h,
      fold the s390 fix from Halil Pasic]
Signed-off-by: Christoph Hellwig <hch@lst.de>

DMA_ATTR_NO_KERNEL_MAPPING is generally implemented by allocating
normal cacheable pages or CMA memory, and then returning the page
pointer as the opaque handle.  Lift that code from the xtensa and
generic dma remapping implementations into the generic dma-direct
code so that we don't even call arch_dma_alloc for these allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Only call into arch_dma_alloc if we require an uncached mapping,
and remove the parisc code manually doing normal cached
DMA_ATTR_NON_CONSISTENT allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc

Check if we need to allocate uncached memory for a device given the
allocation flags.  Switch over the uncached segment check to this helper
to deal with architectures that do not support the dma_cache_sync
operation and thus should not returned cacheable memory for
DMA_ATTR_NON_CONSISTENT allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>

A few architectures support uncached kernel segments.  In that case we get
an uncached mapping for a given physica address by using an offset in the
uncached segement.  Implement support for this scheme in the generic
dma-direct code instead of duplicating it in arch hooks.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Both dma_alloc_from_contiguous() and dma_release_from_contiguous() are
very simply implemented, but requiring callers to pass certain
parameters like count and align, and taking a boolean parameter to check
__GFP_NOWARN in the allocation flags. So every function call duplicates
similar work:

	unsigned long order = get_order(size);
	size_t count = size >> PAGE_SHIFT;

	page = dma_alloc_from_contiguous(dev, count, order,
			gfp & __GFP_NOWARN);

	[...]

	dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT);

Additionally, as CMA can be used only in the context which permits
sleeping, most of callers do a gfpflags_allow_blocking() check and a
corresponding fallback allocation of normal pages upon any false result:

	if (gfpflags_allow_blocking(flag))
		page = dma_alloc_from_contiguous();
	if (!page)
		page = alloc_pages();

	[...]

	if (!dma_release_from_contiguous(dev, page, count))
		__free_pages(page, get_order(size));

So this patch simplifies those function calls by abstracting these
operations into the two new functions: dma_{alloc,free}_contiguous.

As some callers of dma_{alloc,release}_from_contiguous() might be
complicated, this patch just implements these two new functions to
kernel/dma/direct.c only as an initial step.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Most dma_map_ops implementations already had some issues with a NULL
device, or did simply crash if one was fed to them.  Now that we have
cleaned up all the obvious offenders we can stop to pretend we
support this mode.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull virtio updates from Michael Tsirkin:
 "Several fixes, most notably fix for virtio on swiotlb systems"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: silence an unused-variable warning
  virtio: hint if callbacks surprisingly might sleep
  virtio-ccw: wire up ->bus_name callback
  s390/virtio: handle find on invalid queue gracefully
  virtio-ccw: diag 500 may return a negative cookie
  virtio_balloon: remove the unnecessary 0-initialization
  virtio-balloon: improve update_balloon_size_func
  virtio-blk: Consider virtio_max_dma_size() for maximum segment size
  virtio: Introduce virtio_max_dma_size()
  dma: Introduce dma_max_mapping_size()
  swiotlb: Add is_swiotlb_active() function
  swiotlb: Introduce swiotlb_max_mapping_size()