linux.git/io_uring, branch v6.4-rc2 Linux kernel source tree Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux 2023-05-07T17:00:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-05-07T17:00:09+00:00 03e5cb7b50feb687508946a702febaba24c77f0b Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages 
Pull more io_uring updates from Jens Axboe:
 "Nothing major in here, just two different parts:

   - A small series from Breno that enables passing the full SQE down
     for ->uring_cmd().

     This is a prerequisite for enabling full network socket operations.
     Queued up a bit late because of some stylistic concerns that got
     resolved, would be nice to have this in 6.4-rc1 so the dependent
     work will be easier to handle for 6.5.

   - Fix for the huge page coalescing, which was a regression introduced
     in the 6.3 kernel release (Tobias)"

* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
  io_uring: Remove unnecessary BUILD_BUG_ON
  io_uring: Pass whole sqe to commands
  io_uring: Create a helper to return the SQE size
  io_uring/rsrc: check for nonconsecutive pages
io_uring: Remove unnecessary BUILD_BUG_ON 2023-05-04T14:19:05+00:00 Breno Leitao leitao@debian.org 2023-05-04T12:18:56+00:00 d2b7fa6174bc4260e496cbf84375c73636914641 In the io_uring_cmd_prep_async() there is an unnecessary compilation time check to check if cmd is correctly placed at field 48 of the SQE. This is unnecessary, since this check is already in place at io_uring_init(): BUILD_BUG_SQE_ELEM(48, __u64, addr3); Remove it and the uring_cmd_pdu_size() function, which is not used anymore. Keith started a discussion about this topic in the following thread: Link: https://lore.kernel.org/lkml/ZDBmQOhbyU0iLhMw@kbusch-mbp.dhcp.thefacebook.com/ Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230504121856.904491-4-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 
In the io_uring_cmd_prep_async() there is an unnecessary compilation time
check to check if cmd is correctly placed at field 48 of the SQE.

This is unnecessary, since this check is already in place at
io_uring_init():

          BUILD_BUG_SQE_ELEM(48, __u64,  addr3);

Remove it and the uring_cmd_pdu_size() function, which is not used
anymore.

Keith started a discussion about this topic in the following thread:
Link: https://lore.kernel.org/lkml/ZDBmQOhbyU0iLhMw@kbusch-mbp.dhcp.thefacebook.com/

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-4-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring: Pass whole sqe to commands 2023-05-04T14:19:05+00:00 Breno Leitao leitao@debian.org 2023-05-04T12:18:55+00:00 fd9b8547bc5c34186dc42ea05fb4380d21695374 Currently uring CMD operation relies on having large SQEs, but future operations might want to use normal SQE. The io_uring_cmd currently only saves the payload (cmd) part of the SQE, but, for commands that use normal SQE size, it might be necessary to access the initial SQE fields outside of the payload/cmd block. So, saves the whole SQE other than just the pdu. This changes slightly how the io_uring_cmd works, since the cmd structures and callbacks are not opaque to io_uring anymore. I.e, the callbacks can look at the SQE entries, not only, in the cmd structure. The main advantage is that we don't need to create custom structures for simple commands. Creates io_uring_sqe_cmd() that returns the cmd private data as a null pointer and avoids casting in the callee side. Also, make most of ublk_drv's sqe->cmd priv structure into const, and use io_uring_sqe_cmd() to get the private structure, removing the unwanted cast. (There is one case where the cast is still needed since the header->{len,addr} is updated in the private structure) Suggested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Currently uring CMD operation relies on having large SQEs, but future
operations might want to use normal SQE.

The io_uring_cmd currently only saves the payload (cmd) part of the SQE,
but, for commands that use normal SQE size, it might be necessary to
access the initial SQE fields outside of the payload/cmd block.  So,
saves the whole SQE other than just the pdu.

This changes slightly how the io_uring_cmd works, since the cmd
structures and callbacks are not opaque to io_uring anymore. I.e, the
callbacks can look at the SQE entries, not only, in the cmd structure.

The main advantage is that we don't need to create custom structures for
simple commands.

Creates io_uring_sqe_cmd() that returns the cmd private data as a null
pointer and avoids casting in the callee side.
Also, make most of ublk_drv's sqe->cmd priv structure into const, and use
io_uring_sqe_cmd() to get the private structure, removing the unwanted
cast. (There is one case where the cast is still needed since the
header->{len,addr} is updated in the private structure)

Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring: Create a helper to return the SQE size 2023-05-04T14:19:05+00:00 Breno Leitao leitao@debian.org 2023-05-04T12:18:54+00:00 96c7d4f81db0fea05c0792f7563ae0cb4ad5f022 Create a simple helper that returns the size of the SQE. The SQE could have two size, depending of the flags. If IO_URING_SETUP_SQE128 flag is set, then return a double SQE, otherwise returns the sizeof of io_uring_sqe (64 bytes). Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230504121856.904491-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Create a simple helper that returns the size of the SQE. The SQE could
have two size, depending of the flags.

If IO_URING_SETUP_SQE128 flag is set, then return a double SQE,
otherwise returns the sizeof of io_uring_sqe (64 bytes).

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring/rsrc: check for nonconsecutive pages 2023-05-03T15:00:22+00:00 Tobias Holl tobias@tholl.xyz 2023-05-03T14:59:50+00:00 776617db78c6d208780e7c69d4d68d1fa82913de Pages that are from the same folio do not necessarily need to be consecutive. In that case, we cannot consolidate them into a single bvec entry. Before applying the huge page optimization from commit 57bebf807e2a ("io_uring/rsrc: optimise registered huge pages"), check that the memory is actually consecutive. Cc: stable@vger.kernel.org Fixes: 57bebf807e2a ("io_uring/rsrc: optimise registered huge pages") Signed-off-by: Tobias Holl <tobias@tholl.xyz> [axboe: formatting] Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Pages that are from the same folio do not necessarily need to be
consecutive. In that case, we cannot consolidate them into a single bvec
entry. Before applying the huge page optimization from commit 57bebf807e2a
("io_uring/rsrc: optimise registered huge pages"), check that the memory
is actually consecutive.

Cc: stable@vger.kernel.org
Fixes: 57bebf807e2a ("io_uring/rsrc: optimise registered huge pages")
Signed-off-by: Tobias Holl <tobias@tholl.xyz>
[axboe: formatting]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2023-04-26T23:07:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-26T23:07:23+00:00 6e98b09da931a00bf4e0477d0fa52748bf28fcce Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ... 
Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux 2023-04-26T19:52:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-26T19:52:58+00:00 9dd6956b38923dc1b7b349ca1eee3c0bb1f0163a Pull block updates from Jens Axboe: - drbd patches, bringing us closer to unifying the out-of-tree version and the in tree one (Andreas, Christoph) - support for auto-quiesce for the s390 dasd driver (Stefan) - MD pull request via Song: - md/bitmap: Optimal last page size (Jon Derrick) - Various raid10 fixes (Yu Kuai, Li Nan) - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk) - NVMe pull request via Christoph: - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - Validate nvmet module parameters (Chaitanya Kulkarni) - Fence TCP socket on receive error (Chris Leech) - Fix async event trace event (Keith Busch) - Minor cleanups (Chaitanya Kulkarni, zhenwei pi) - Fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - Fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - Fix irq locking in nvme-fcloop (Ming Lei) - Remove queue mapping helper for rdma devices (Sagi Grimberg) - use structured request attribute checks for nbd (Jakub) - fix blk-crypto race conditions between keyslot management (Eric) - add sed-opal support for reading read locking range attributes (Ondrej) - make fault injection configurable for null_blk (Akinobu) - clean up the request insertion API (Christoph) - clean up the queue running API (Christoph) - blkg config helper cleanups (Tejun) - lazy init support for blk-iolatency (Tejun) - various fixes and tweaks to ublk (Ming) - remove hybrid polling. It hasn't really been useful since we got async polled IO support, and these days we don't support sync polled IO at all (Keith) - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming, Chaitanya, me) * tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits) nbd: fix incomplete validation of ioctl arg ublk: don't return 0 in case of any failure sed-opal: geometry feature reporting command null_blk: Always check queue mode setting from configfs block: ublk: switch to ioctl command encoding blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush block, bfq: Fix division by zero error on zero wsum fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m block: store bdev->bd_disk->fops->submit_bio state in bdev block: re-arrange the struct block_device fields for better layout md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer ... 
Pull block updates from Jens Axboe:

 - drbd patches, bringing us closer to unifying the out-of-tree version
   and the in tree one (Andreas, Christoph)

 - support for auto-quiesce for the s390 dasd driver (Stefan)

 - MD pull request via Song:
      - md/bitmap: Optimal last page size (Jon Derrick)
      - Various raid10 fixes (Yu Kuai, Li Nan)
      - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)

 - NVMe pull request via Christoph:
      - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
      - Validate nvmet module parameters (Chaitanya Kulkarni)
      - Fence TCP socket on receive error (Chris Leech)
      - Fix async event trace event (Keith Busch)
      - Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
      - Fix and cleanup nvmet Identify handling (Damien Le Moal,
        Christoph Hellwig)
      - Fix double blk_mq_complete_request race in the timeout handler
        (Lei Yin)
      - Fix irq locking in nvme-fcloop (Ming Lei)
      - Remove queue mapping helper for rdma devices (Sagi Grimberg)

 - use structured request attribute checks for nbd (Jakub)

 - fix blk-crypto race conditions between keyslot management (Eric)

 - add sed-opal support for reading read locking range attributes
   (Ondrej)

 - make fault injection configurable for null_blk (Akinobu)

 - clean up the request insertion API (Christoph)

 - clean up the queue running API (Christoph)

 - blkg config helper cleanups (Tejun)

 - lazy init support for blk-iolatency (Tejun)

 - various fixes and tweaks to ublk (Ming)

 - remove hybrid polling. It hasn't really been useful since we got
   async polled IO support, and these days we don't support sync polled
   IO at all (Keith)

 - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
   Chaitanya, me)

* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
  nbd: fix incomplete validation of ioctl arg
  ublk: don't return 0 in case of any failure
  sed-opal: geometry feature reporting command
  null_blk: Always check queue mode setting from configfs
  block: ublk: switch to ioctl command encoding
  blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
  block, bfq: Fix division by zero error on zero wsum
  fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
  block: store bdev->bd_disk->fops->submit_bio state in bdev
  block: re-arrange the struct block_device fields for better layout
  md/raid5: remove unused working_disks variable
  md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
  md/raid10: fix memleak of md thread
  md/raid10: fix memleak for 'conf->bio_split'
  md/raid10: fix leak of 'r10bio->remaining' for recovery
  md/raid10: don't BUG_ON() in raise_barrier()
  md: fix soft lockup in status_resync
  md: add error_handlers for raid0 and linear
  md: Use optimal I/O size for last bitmap page
  md: Fix types in sb writer
  ...
Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux 2023-04-26T19:40:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-26T19:40:31+00:00 5b9a7bb72fddbc5247f56ede55d485fab7abdf92 Pull io_uring updates from Jens Axboe: - Cleanup of the io-wq per-node mapping, notably getting rid of it so we just have a single io_wq entry per ring (Breno) - Followup to the above, move accounting to io_wq as well and completely drop struct io_wqe (Gabriel) - Enable KASAN for the internal io_uring caches (Breno) - Add support for multishot timeouts. Some applications use timeouts to wake someone waiting on completion entries, and this makes it a bit easier to just have a recurring timer rather than needing to rearm it every time (David) - Support archs that have shared cache coloring between userspace and the kernel, and hence have strict address requirements for mmap'ing the ring into userspace. This should only be parisc/hppa. (Helge, me) - XFS has supported O_DIRECT writes without needing to lock the inode exclusively for a long time, and ext4 now supports it as well. This is true for the common cases of not extending the file size. Flag the fs as having that feature, and utilize that to avoid serializing those writes in io_uring (me) - Enable completion batching for uring commands (me) - Revert patch adding io_uring restriction to what can be GUP mapped or not. This does not belong in io_uring, as io_uring isn't really special in this regard. Since this is also getting in the way of cleanups and improvements to the GUP code, get rid of if (me) - A few series greatly reducing the complexity of registered resources, like buffers or files. Not only does this clean up the code a lot, the simplified code is also a LOT more efficient (Pavel) - Series optimizing how we wait for events and run task_work related to it (Pavel) - Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel) - Misc cleanups and improvements (Pavel, me) * tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits) Revert "io_uring/rsrc: disallow multi-source reg buffers" io_uring: add support for multishot timeouts io_uring/rsrc: disassociate nodes and rsrc_data io_uring/rsrc: devirtualise rsrc put callbacks io_uring/rsrc: pass node to io_rsrc_put_work() io_uring/rsrc: inline io_rsrc_put_work() io_uring/rsrc: add empty flag in rsrc_node io_uring/rsrc: merge nodes and io_rsrc_put io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal io_uring/rsrc: remove unused io_rsrc_node::llist io_uring/rsrc: refactor io_queue_rsrc_removal io_uring/rsrc: simplify single file node switching io_uring/rsrc: clean up __io_sqe_buffers_update() io_uring/rsrc: inline switch_start fast path io_uring/rsrc: remove rsrc_data refs io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce io_uring/rsrc: use wq for quiescing io_uring/rsrc: refactor io_rsrc_ref_quiesce io_uring/rsrc: remove io_rsrc_node::done io_uring/rsrc: use nospec'ed indexes ... 
Pull io_uring updates from Jens Axboe:

 - Cleanup of the io-wq per-node mapping, notably getting rid of it so
   we just have a single io_wq entry per ring (Breno)

 - Followup to the above, move accounting to io_wq as well and
   completely drop struct io_wqe (Gabriel)

 - Enable KASAN for the internal io_uring caches (Breno)

 - Add support for multishot timeouts. Some applications use timeouts to
   wake someone waiting on completion entries, and this makes it a bit
   easier to just have a recurring timer rather than needing to rearm it
   every time (David)

 - Support archs that have shared cache coloring between userspace and
   the kernel, and hence have strict address requirements for mmap'ing
   the ring into userspace. This should only be parisc/hppa. (Helge, me)

 - XFS has supported O_DIRECT writes without needing to lock the inode
   exclusively for a long time, and ext4 now supports it as well. This
   is true for the common cases of not extending the file size. Flag the
   fs as having that feature, and utilize that to avoid serializing
   those writes in io_uring (me)

 - Enable completion batching for uring commands (me)

 - Revert patch adding io_uring restriction to what can be GUP mapped or
   not. This does not belong in io_uring, as io_uring isn't really
   special in this regard. Since this is also getting in the way of
   cleanups and improvements to the GUP code, get rid of if (me)

 - A few series greatly reducing the complexity of registered resources,
   like buffers or files. Not only does this clean up the code a lot,
   the simplified code is also a LOT more efficient (Pavel)

 - Series optimizing how we wait for events and run task_work related to
   it (Pavel)

 - Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel)

 - Misc cleanups and improvements (Pavel, me)

* tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits)
  Revert "io_uring/rsrc: disallow multi-source reg buffers"
  io_uring: add support for multishot timeouts
  io_uring/rsrc: disassociate nodes and rsrc_data
  io_uring/rsrc: devirtualise rsrc put callbacks
  io_uring/rsrc: pass node to io_rsrc_put_work()
  io_uring/rsrc: inline io_rsrc_put_work()
  io_uring/rsrc: add empty flag in rsrc_node
  io_uring/rsrc: merge nodes and io_rsrc_put
  io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal
  io_uring/rsrc: remove unused io_rsrc_node::llist
  io_uring/rsrc: refactor io_queue_rsrc_removal
  io_uring/rsrc: simplify single file node switching
  io_uring/rsrc: clean up __io_sqe_buffers_update()
  io_uring/rsrc: inline switch_start fast path
  io_uring/rsrc: remove rsrc_data refs
  io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce
  io_uring/rsrc: use wq for quiescing
  io_uring/rsrc: refactor io_rsrc_ref_quiesce
  io_uring/rsrc: remove io_rsrc_node::done
  io_uring/rsrc: use nospec'ed indexes
  ...
Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux 2023-04-24T17:29:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-24T17:29:28+00:00 b9dff2195f8a5847fad801046b26955e05670d31 Pull ITER_UBUF updates from Jens Axboe: "This turns singe vector imports into ITER_UBUF, rather than ITER_IOVEC. The former is more trivial to iterate and advance, and hence a bit more efficient. From some very unscientific testing, ~60% of all iovec imports are single vector" * tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux: iov_iter: Mark copy_compat_iovec_from_user() noinline iov_iter: import single vector iovecs as ITER_UBUF iov_iter: convert import_single_range() to ITER_UBUF iov_iter: overlay struct iovec and ubuf/len iov_iter: set nr_segs = 1 for ITER_UBUF iov_iter: remove iov_iter_iovec() iov_iter: add iter_iov_addr() and iter_iov_len() helpers ALSA: pcm: check for user backed iterator, not specific iterator type IB/qib: check for user backed iterator, not specific iterator type IB/hfi1: check for user backed iterator, not specific iterator type iov_iter: add iter_iovec() helper block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly 
Pull ITER_UBUF updates from Jens Axboe:
 "This turns singe vector imports into ITER_UBUF, rather than
  ITER_IOVEC.

  The former is more trivial to iterate and advance, and hence a bit
  more efficient. From some very unscientific testing, ~60% of all iovec
  imports are single vector"

* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
  iov_iter: Mark copy_compat_iovec_from_user() noinline
  iov_iter: import single vector iovecs as ITER_UBUF
  iov_iter: convert import_single_range() to ITER_UBUF
  iov_iter: overlay struct iovec and ubuf/len
  iov_iter: set nr_segs = 1 for ITER_UBUF
  iov_iter: remove iov_iter_iovec()
  iov_iter: add iter_iov_addr() and iter_iov_len() helpers
  ALSA: pcm: check for user backed iterator, not specific iterator type
  IB/qib: check for user backed iterator, not specific iterator type
  IB/hfi1: check for user backed iterator, not specific iterator type
  iov_iter: add iter_iovec() helper
  block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2023-04-20T23:29:51+00:00 Jakub Kicinski kuba@kernel.org 2023-04-20T23:27:33+00:00 681c5b51dc6b8ff1ec05555243eccf64a08cb2fd Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Adjacent changes:

net/mptcp/protocol.h
  63740448a32e ("mptcp: fix accept vs worker race")
  2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
  ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>