linux.git/init/main.c, branch v4.15-rc2

pid: remove pidhash

2017-11-18T00:10:04+00:00

pidhash is no longer required as all the information can be looked up
from idr tree.  nr_hashed represented the number of pids that had been
hashed.  Since, nr_hashed and PIDNS_HASH_ADDING are no longer relevant,
it has been renamed to pid_allocated and PIDNS_ADDING respectively.

[gs051095@gmail.com: v6]
  Link: http://lkml.kernel.org/r/1507760379-21662-3-git-send-email-gs051095@gmail.com
Link: http://lkml.kernel.org/r/1507583624-22146-3-git-send-email-gs051095@gmail.com
Signed-off-by: Gargi Sharma 
Reviewed-by: Rik van Riel 
Tested-by: Tony Luck 	[ia64]
Cc: Julia Lawall 
Cc: Ingo Molnar 
Cc: Pavel Tatashin 
Cc: Kirill Tkhai 
Cc: Oleg Nesterov 
Cc: Eric W. Biederman 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

pid: replace pid bitmap implementation with IDR API

2017-11-18T00:10:03+00:00

Patch series "Replacing PID bitmap implementation with IDR API", v4.

This series replaces kernel bitmap implementation of PID allocation with
IDR API.  These patches are written to simplify the kernel by replacing
custom code with calls to generic code.

The following are the stats for pid and pid_namespace object files
before and after the replacement.  There is a noteworthy change between
the IDR and bitmap implementation.

Before
   text       data        bss        dec        hex    filename
   8447       3894         64      12405       3075    kernel/pid.o
After
   text       data        bss        dec        hex    filename
   3397        304          0       3701        e75    kernel/pid.o

Before
   text       data        bss        dec        hex    filename
   5692       1842        192       7726       1e2e    kernel/pid_namespace.o
After
   text       data        bss        dec        hex    filename
   2854        216         16       3086        c0e    kernel/pid_namespace.o

The following are the stats for ps, pstree and calling readdir on /proc
for 10,000 processes.

ps:
        With IDR API    With bitmap
real    0m1.479s        0m2.319s
user    0m0.070s        0m0.060s
sys     0m0.289s        0m0.516s

pstree:
        With IDR API    With bitmap
real    0m1.024s        0m1.794s
user    0m0.348s        0m0.612s
sys     0m0.184s        0m0.264s

proc:
        With IDR API    With bitmap
real    0m0.059s        0m0.074s
user    0m0.000s        0m0.004s
sys     0m0.016s        0m0.016s

This patch (of 2):

Replace the current bitmap implementation for Process ID allocation.
Functions that are no longer required, for example, free_pidmap(),
alloc_pidmap(), etc.  are removed.  The rest of the functions are
modified to use the IDR API.  The change was made to make the PID
allocation less complex by replacing custom code with calls to generic
API.

[gs051095@gmail.com: v6]
  Link: http://lkml.kernel.org/r/1507760379-21662-2-git-send-email-gs051095@gmail.com
[avagin@openvz.org: restore the old behaviour of the ns_last_pid sysctl]
  Link: http://lkml.kernel.org/r/20171106183144.16368-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/1507583624-22146-2-git-send-email-gs051095@gmail.com
Signed-off-by: Gargi Sharma 
Reviewed-by: Rik van Riel 
Acked-by: Oleg Nesterov 
Cc: Julia Lawall 
Cc: Ingo Molnar 
Cc: Pavel Tatashin 
Cc: Kirill Tkhai 
Cc: Eric W. Biederman 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

kmemcheck: remove annotations

2017-11-16T02:21:04+00:00

Patch series "kmemcheck: kill kmemcheck", v2.

As discussed at LSF/MM, kill kmemcheck.

KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow).  KASan is already upstream.

We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).

The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.

Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.

This patch (of 4):

Remove kmemcheck annotations, and calls to kmemcheck from the kernel.

[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
  Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com
Signed-off-by: Sasha Levin 
Cc: Alexander Potapenko 
Cc: Eric W. Biederman 
Cc: Michal Hocko 
Cc: Pekka Enberg 
Cc: Steven Rostedt 
Cc: Tim Hansen 
Cc: Vegard Nossum 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T02:29:23+00:00

Pull x86 APIC updates from Thomas Gleixner:
 "This update provides a major overhaul of the APIC initialization and
  vector allocation code:

   - Unification of the APIC and interrupt mode setup which was
     scattered all over the place and was hard to follow. This also
     distangles the timer setup from the APIC initialization which
     brings a clear separation of functionality.

     Great detective work from Dou Lyiang!

   - Refactoring of the x86 vector allocation mechanism. The existing
     code was based on nested loops and rather convoluted APIC callbacks
     which had a horrible worst case behaviour and tried to serve all
     different use cases in one go. This led to quite odd hacks when
     supporting the new managed interupt facility for multiqueue devices
     and made it more or less impossible to deal with the vector space
     exhaustion which was a major roadblock for server hibernation.

     Aside of that the code dealing with cpu hotplug and the system
     vectors was disconnected from the actual vector management and
     allocation code, which made it hard to follow and maintain.

     Utilizing the new bitmap matrix allocator core mechanism, the new
     allocator and management code consolidates the handling of system
     vectors, legacy vectors, cpu hotplug mechanisms and the actual
     allocation which needs to be aware of system and legacy vectors and
     hotplug constraints into a single consistent entity.

     This has one visible change: The support for multi CPU targets of
     interrupts, which is only available on a certain subset of
     CPUs/APIC variants has been removed in favour of single interrupt
     targets. A proper analysis of the multi CPU target feature revealed
     that there is no real advantage as the vast majority of interrupts
     end up on the CPU with the lowest APIC id in the set of target CPUs
     anyway. That change was agreed on by the relevant folks and allowed
     to simplify the implementation significantly and to replace rather
     fragile constructs like the vector cleanup IPI with straight
     forward and solid code.

     Furthermore this allowed to cleanly separate the allocation details
     for legacy, normal and managed interrupts:

      * Legacy interrupts are not longer wasting 16 vectors
        unconditionally

      * Managed interrupts have now a guaranteed vector reservation, but
        the actual vector assignment happens when the interrupt is
        requested. It's guaranteed not to fail.

      * Normal interrupts no longer allocate vectors unconditionally
        when the interrupt is set up (IO/APIC init or MSI(X) enable).
        The mechanism has been switched to a best effort reservation
        mode. The actual allocation happens when the interrupt is
        requested. Contrary to managed interrupts the request can fail
        due to vector space exhaustion, but drivers must handle a fail
        of request_irq() anyway. When the interrupt is freed, the vector
        is handed back as well.

        This solves a long standing problem with large unconditional
        vector allocations for a certain class of enterprise devices
        which prevented server hibernation due to vector space
        exhaustion when the unused allocated vectors had to be migrated
        to CPU0 while unplugging all non boot CPUs.

     The code has been equipped with trace points and detailed debugfs
     information to aid analysis of the vector space"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE
  PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code
  genirq: Add config option for reservation mode
  x86/vector: Use correct per cpu variable in free_moved_vector()
  x86/apic/vector: Ignore set_affinity call for inactive interrupts
  x86/apic: Fix spelling mistake: "symmectic" -> "symmetric"
  x86/apic: Use dead_cpu instead of current CPU when cleaning up
  ACPI/init: Invoke early ACPI initialization earlier
  x86/vector: Respect affinity mask in irq descriptor
  x86/irq: Simplify hotplug vector accounting
  x86/vector: Switch IOAPIC to global reservation mode
  x86/vector/msi: Switch to global reservation mode
  x86/vector: Handle managed interrupts proper
  x86/io_apic: Reevaluate vector configuration on activate()
  iommu/amd: Reevaluate vector configuration on activate()
  iommu/vt-d: Reevaluate vector configuration on activate()
  x86/apic/msi: Force reactivation of interrupts at startup time
  x86/vector: Untangle internal state from irq_cfg
  x86/vector: Compile SMP only code conditionally
  x86/apic: Remove unused callbacks
  ...

sched/isolation: Move housekeeping related code to its own file

2017-10-27T07:55:24+00:00

The housekeeping code is currently tied to the NOHZ code. As we are
planning to make housekeeping independent from it, start with moving
the relevant code to its own file.

Signed-off-by: Frederic Weisbecker 
Acked-by: Thomas Gleixner 
Acked-by: Paul E. McKenney 
Cc: Chris Metcalf 
Cc: Christoph Lameter 
Cc: Linus Torvalds 
Cc: Luiz Capitulino 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Wanpeng Li 
Link: http://lkml.kernel.org/r/1509072159-31808-2-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar

ACPI/init: Invoke early ACPI initialization earlier

2017-09-27T07:37:41+00:00

acpi_early_init() unmaps the temporary ACPI Table mappings which are used
in the early startup code and prepares for permanent table mappings.

Before the consolidation of the x86 APIC setup code the invocation of
acpi_early_init() happened before the interrupt remapping unit was
initialized. With the rework the remapping unit initialization moved in
front of acpi_early_init() which causes an ACPI warning when the ACPI root
tables get reallocated afterwards.

Invoke acpi_early_init() before late_time_init() which is before the access
to the DMAR tables happens.

Fixes: 935356cecda8 ("x86/apic: Initialize interrupt mode after timer init")
Reported-by: Xiaolong Ye 
Signed-off-by: Dou Liyang 
Cc: Tony Luck 
Cc: linux-ia64@vger.kernel.org
Cc: bhe@redhat.com
Cc: Fenghua Yu 
Cc: Michael Ellerman 
Cc: "Rafael J. Wysocki" 
Cc: Will Deacon 
Cc: linux-acpi@vger.kernel.org
Cc: bp@alien8.de
Cc: Lv" 
Cc: yinghai@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1505294274-441-1-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner

init/main.c: extract early boot entropy from the passed cmdline

2017-09-09T01:26:50+00:00

Feed the boot command-line as to the /dev/random entropy pool

Existing Android bootloaders usually pass data which may not be known by
an external attacker on the kernel command-line.  It may also be the
case on other embedded systems.  Sample command-line from a Google Pixel
running CopperheadOS....

    console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0
    androidboot.hardware=sailfish user_debug=31 ehci-hcd.park=3
    lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff buildvariant=user
    veritykeyid=id:dfcb9db0089e5b3b4090a592415c28e1cb4545ab
    androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=yellow
    androidboot.veritymode=enforcing androidboot.keymaster=1
    androidboot.serialno=FA6CE0305299 androidboot.baseband=msm
    mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi
    androidboot.slot_suffix=_b fpsimd.fpsimd_settings=0
    app_setting.use_app_setting=0 kernelflag=0x00000000 debugflag=0x00000000
    androidboot.hardware.revision=PVT radioflag=0x00000000
    radioflagex1=0x00000000 radioflagex2=0x00000000 cpumask=0x00000000
    androidboot.hardware.ddr=4096MB,Hynix,LPDDR4 androidboot.ddrinfo=00000006
    androidboot.ddrsize=4GB androidboot.hardware.color=GRA00
    androidboot.hardware.ufs=32GB,Samsung androidboot.msm.hw_ver_id=268824801
    androidboot.qf.st=2 androidboot.cid=11111111 androidboot.mid=G-2PW4100
    androidboot.bootloader=8996-012001-1704121145
    androidboot.oem_unlock_support=1 androidboot.fp_src=1
    androidboot.htc.hrdump=detected androidboot.ramdump.opt=mem@2g:2g,mem@4g:2g
    androidboot.bootreason=reboot androidboot.ramdump_enable=0 ro
    root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/sda34"
    rootwait skip_initramfs init=/init androidboot.wificountrycode=US
    androidboot.boottime=1BLL:85,1BLE:669,2BLL:0,2BLE:1777,SW:6,KL:8136

Among other things, it contains a value unique to the device
(androidboot.serialno=FA6CE0305299), unique to the OS builds for the
device variant (veritykeyid=id:dfcb9db0089e5b3b4090a592415c28e1cb4545ab)
and timings from the bootloader stages in milliseconds
(androidboot.boottime=1BLL:85,1BLE:669,2BLL:0,2BLE:1777,SW:6,KL:8136).

[tytso@mit.edu: changelog tweak]
[labbott@redhat.com: line-wrapped command line]
Link: http://lkml.kernel.org/r/20170816231458.2299-3-labbott@redhat.com
Signed-off-by: Daniel Micay 
Signed-off-by: Laura Abbott 
Acked-by: Kees Cook 
Cc: "Theodore Ts'o" 
Cc: Laura Abbott 
Cc: Nick Kralevich 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

init: move stack canary initialization after setup_arch

2017-09-09T01:26:50+00:00

Patch series "Command line randomness", v3.

A series to add the kernel command line as a source of randomness.

This patch (of 2):

Stack canary intialization involves getting a random number.  Getting this
random number may involve accessing caches or other architectural specific
features which are not available until after the architecture is setup.
Move the stack canary initialization later to accommodate this.

Link: http://lkml.kernel.org/r/20170816231458.2299-2-labbott@redhat.com
Signed-off-by: Laura Abbott 
Signed-off-by: Laura Abbott 
Acked-by: Kees Cook 
Cc: "Theodore Ts'o" 
Cc: Daniel Micay 
Cc: Nick Kralevich 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2017-09-07T04:33:12+00:00

Pull percpu updates from Tejun Heo:
 "A lot of changes for percpu this time around. percpu inherited the
  same area allocator from the original pre-virtual-address-mapped
  implementation. This was from the time when percpu allocator wasn't
  used all that much and the implementation was focused on simplicity,
  with the unfortunate computational complexity of O(number of areas
  allocated from the chunk) per alloc / free.

  With the increase in percpu usage, we're hitting cases where the lack
  of scalability is hurting. The most prominent one right now is bpf
  perpcu map creation / destruction which may allocate and free a lot of
  entries consecutively and it's likely that the problem will become
  more prominent in the future.

  To address the issue, Dennis replaced the area allocator with hinted
  bitmap allocator which is more consistent. While the new allocator
  does perform a bit worse in some cases, it outperforms the old
  allocator way more than an order of magnitude in other more common
  scenarios while staying mostly flat in CPU overhead and completely
  flat in memory consumption"

* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (27 commits)
  percpu: update header to contain bitmap allocator explanation.
  percpu: update pcpu_find_block_fit to use an iterator
  percpu: use metadata blocks to update the chunk contig hint
  percpu: update free path to take advantage of contig hints
  percpu: update alloc path to only scan if contig hints are broken
  percpu: keep track of the best offset for contig hints
  percpu: skip chunks if the alloc does not fit in the contig hint
  percpu: add first_bit to keep track of the first free in the bitmap
  percpu: introduce bitmap metadata blocks
  percpu: replace area map allocator with bitmap
  percpu: generalize bitmap (un)populated iterators
  percpu: increase minimum percpu allocation size and align first regions
  percpu: introduce nr_empty_pop_pages to help empty page accounting
  percpu: change the number of pages marked in the first_chunk pop bitmap
  percpu: combine percpu address checks
  percpu: modify base_addr to be region specific
  percpu: setup_first_chunk rename schunk/dchunk to chunk
  percpu: end chunk area maps page aligned for the populated bitmap
  percpu: unify allocation of schunk and dchunk
  percpu: setup_first_chunk remove dyn_size and consolidate logic
  ...

mm, memory_hotplug: drop zone from build_all_zonelists

2017-09-07T00:27:25+00:00

build_all_zonelists gets a zone parameter to initialize zone's pagesets.
There is only a single user which gives a non-NULL zone parameter and
that one doesn't really need the rest of the build_all_zonelists (see
commit 6dcd73d7011b ("memory-hotplug: allocate zone's pcp before
onlining pages")).

Therefore remove setup_zone_pageset from build_all_zonelists and call it
from its only user directly.  This will also remove a pointless zonlists
rebuilding which is always good.

Link: http://lkml.kernel.org/r/20170721143915.14161-5-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Acked-by: Vlastimil Babka 
Cc: Johannes Weiner 
Cc: Joonsoo Kim 
Cc: Mel Gorman 
Cc: Shaohua Li 
Cc: Toshi Kani 
Cc: Wen Congyang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds