Pull char / misc / IIO fixes from Greg KH:
 "Here are some much-delayed char/misc/iio driver fixes for 6.18-rc8.

  Fixes in here include:

   - lots of iio driver bugfixes for reported issues.

   - counter driver bugfix

   - slimbus driver bugfix

   - mei tiny bugfix

   - nvmem layout uevent bugfix

  All of these have been in linux-next for a while, but due to travel on
  my side, I haven't had a chance to get them to you"

* tag 'char-misc-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
  nvmem: layouts: fix nvmem_layout_bus_uevent
  iio: accel: bmc150: Fix irq assumption regression
  most: usb: fix double free on late probe failure
  slimbus: ngd: Fix reference count leak in qcom_slim_ngd_notify_slaves
  firmware: stratix10-svc: fix bug in saving controller data
  mei: fix error flow in probe
  iio: st_lsm6dsx: Fixed calibrated timestamp calculation
  iio: humditiy: hdc3020: fix units for thresholds and hysteresis
  iio: humditiy: hdc3020: fix units for temperature and humidity measurement
  iio: imu: st_lsm6dsx: fix array size for st_lsm6dsx_settings fields
  iio: accel: fix ADXL355 startup race condition
  iio: adc: ad7124: fix temperature channel
  iio:common:ssp_sensors: Fix an error handling path ssp_probe()
  iio: adc: ad7280a: fix ad7280_store_balance_timer()
  iio: buffer-dmaengine: enable .get_dma_dev()
  iio: buffer-dma: support getting the DMA channel
  iio: buffer: support getting dma channel from the buffer
  iio: pressure: bmp280: correct meas_time_us calculation
  iio: adc: stm32-dfsdm: fix st,adc-alt-channel property handling
  iio: adc: ad7380: fix SPI offload trigger rate
  ...

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some last-minutes USB and Thunderbolt driver fixes and new
  device ids for 6.18-rc8. Included in here are:

   - usb storage quirk fixup

   - xhci driver fixes for reported issues

   - usb gadget driver fixes

   - dwc3 driver fixes

   - UAS driver fixup

   - thunderbolt new device ids

   - usb-serial driver new ids

  All of these have been in linux-next with no reported issues, many for
  many weeks"

* tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
  usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errors
  USB: storage: Remove subclass and protocol overrides from Novatek quirk
  usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer
  usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths
  xhci: dbgtty: fix device unregister
  usb: storage: sddr55: Reject out-of-bound new_pba
  USB: serial: option: add support for Rolling RW101R-GL
  usb: typec: ucsi: psy: Set max current to zero when disconnected
  usb: gadget: f_eem: Fix memory leak in eem_unwrap
  usb: dwc3: pci: Sort out the Intel device IDs
  usb: dwc3: pci: add support for the Intel Nova Lake -S
  drivers/usb/dwc3: fix PCI parent check
  usb: storage: Fix memory leak in USB bulk transport
  xhci: sideband: Fix race condition in sideband unregister
  xhci: dbgtty: Fix data corruption when transmitting data form DbC to host
  xhci: fix stale flag preventig URBs after link state error is cleared
  USB: serial: ftdi_sio: add support for u-blox EVK-M101
  usb: cdns3: Fix double resource release in cdns3_pci_probe
  usb: gadget: udc: fix use-after-free in usb_gadget_state_work
  usb: renesas_usbhs: Fix synchronous external abort on unbind
  ...

Pull mailbox fixes from Jassi Brar:

 - omap: check for pending msgs only when mbox is exclusive

 - mailbox-test: debugfs_create_dir error checking

 - mtk:
     - cmdq: fix DMA address handling
     - gpueb: Add missing 'static' to mailbox ops struct

 - pcc: don't zero error register

 - th1520: fix clock imbalance on probe failure

* tag 'mailbox-fixes-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox: th1520: fix clock imbalance on probe failure
  mailbox: pcc: don't zero error register
  mailbox: mtk-gpueb: Add missing 'static' to mailbox ops struct
  mailbox: mtk-cmdq: Refine DMA address handling for the command buffer
  mailbox: mailbox-test: Fix debugfs_create_dir error checking
  mailbox: omap-mailbox: Check for pending msgs only when mbox is exclusive

GCE can only fetch the command buffer address from a 32-bit register.
Some SoCs support a 35-bit command buffer address for GCE, which
requires a right shift of 3 bits before setting the address into
the 32-bit register. A comment has been added to the header of
cmdq_get_shift_pa() to explain this requirement.

To prevent the GCE command buffer address from being DMA mapped beyond
its supported bit range, the DMA bit mask for the device is set during
initialization.

Additionally, to ensure the correct shift is applied when setting or
reading the register that stores the GCE command buffer address,
new APIs, cmdq_convert_gce_addr() and cmdq_revert_gce_addr(), have
been introduced for consistent operations on this register.

The variable type for the command buffer address has been standardized
to dma_addr_t to prevent handling issues caused by type mismatches.

Fixes: 0858fde496f8 ("mailbox: cmdq: variablize address shift in platform")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Pull ceph fixes from Ilya Dryomov:
 "A patch to make sparse read handling work in msgr2 secure mode from
  Slava and a couple of fixes from Ziming and myself to avoid operating
  on potentially invalid memory, all marked for stable"

* tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client:
  libceph: prevent potential out-of-bounds writes in handle_auth_session_key()
  libceph: replace BUG_ON with bounds check for map->max_osd
  ceph: fix crash in process_v2_sparse_read() for encrypted directories
  libceph: drop started parameter of __ceph_open_session()
  libceph: fix potential use-after-free in have_mon_and_osd_map()

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and CAN. No known outstanding
  regressions.

  Current release - regressions:

   - mptcp: initialize rcv_mss before calling tcp_send_active_reset()

   - eth: mlx5e: fix validation logic in rate limiting

  Previous releases - regressions:

   - xsk: avoid data corruption on cq descriptor number

   - bluetooth:
       - prevent race in socket write iter and sock bind
       - fix not generating mackey and ltk when repairing

   - can:
       - kvaser_usb: fix potential infinite loop in command parsers
       - rcar_canfd: fix CAN-FD mode as default

   - eth:
       - veth: reduce XDP no_direct return section to fix race
       - virtio-net: avoid unnecessary checksum calculation on guest RX

  Previous releases - always broken:

   - sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()

   - bluetooth: mediatek: fix kernel crash when releasing iso interface

   - vhost: rewind next_avail_head while discarding descriptors

   - eth:
       - r8169: fix RTL8127 hang on suspend/shutdown
       - aquantia: add missing descriptor cache invalidation on ATL2

   - dsa: microchip: fix resource releases in error path"

* tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose().
  net: fec: do not register PPS event for PEROUT
  net: fec: do not allow enabling PPS and PEROUT simultaneously
  net: fec: do not update PEROUT if it is enabled
  net: fec: cancel perout_timer when PEROUT is disabled
  net: mctp: unconditionally set skb->dev on dst output
  net: atlantic: fix fragment overflow handling in RX path
  MAINTAINERS: separate VIRTIO NET DRIVER and add netdev
  virtio-net: avoid unnecessary checksum calculation on guest RX
  eth: fbnic: Fix counter roll-over issue
  mptcp: clear scheduled subflows on retransmit
  net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
  s390/net: list Aswin Karuvally as maintainer
  net: wwan: mhi: Keep modem name match with Foxconn T99W640
  vhost: rewind next_avail_head while discarding descriptors
  net/sched: em_canid: fix uninit-value in em_canid_match
  can: rcar_canfd: Fix CAN-FD mode as default
  xsk: avoid data corruption on cq descriptor number
  r8169: fix RTL8127 hang on suspend/shutdown
  net: sxgbe: fix potential NULL dereference in sxgbe_rx()
  ...

Commit a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP
GSO tunneling.") inadvertently altered checksum offload behavior
for guests not using UDP GSO tunneling.

Before, tun_put_user called tun_vnet_hdr_from_skb, which passed
has_data_valid = true to virtio_net_hdr_from_skb.

After, tun_put_user began calling tun_vnet_hdr_tnl_from_skb instead,
which passes has_data_valid = false into both call sites.

This caused virtio hdr flags to not include VIRTIO_NET_HDR_F_DATA_VALID
for SKBs where skb->ip_summed == CHECKSUM_UNNECESSARY. As a result,
guests are forced to recalculate checksums unnecessarily.

Restore the previous behavior by ensuring has_data_valid = true is
passed in the !tnl_gso_type case, but only from tun side, as
virtio_net_hdr_tnl_from_skb() is used also by the virtio_net driver,
which in turn must not use VIRTIO_NET_HDR_F_DATA_VALID on tx.

cc: stable@vger.kernel.org
Fixes: a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.")
Signed-off-by: Jon Kohler <jon@nutanix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20251125222754.1737443-1-jon@nutanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With the previous commit revamping the timeout handling, started isn't
used anymore.  It could be taken into account by adjusting the initial
value of the timeout, but there is little point as both callers capture
the timestamp shortly before calling __ceph_open_session() -- the only
thing of note that happens in the interim is taking client->mount_mutex
and that isn't expected to take multiple seconds.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>

Revert commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") because it is reported to introduce a cpuidle
regression leading to a kernel crash on a platform using the ACPI idle
driver.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Closes: https://lore.kernel.org/lkml/20251124200019.GIaSS5U9HhsWBotrQZ@fat_crate.local/

Revert commit 5020d05b3476 ("ACPI: processor: Remove unused empty stubs
of some functions") because it depends on a problematic one.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>