Pull networking fixes from David Miller:

 1) Prevent XFRM per-cpu counter updates for one namespace from being
    applied to another namespace.  Fix from DanS treetman.

 2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes
    Berg.

 3) Remove ethernet header assumption in nft_do_chain_netdev(), from
    Pablo Neira Ayuso.

 4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal
    Speck.

 5) Fix use after free in sixpack_close and mkiss_close.

 6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz.

 7) natsemi doesn't check for DMA mapping errors, from Alexey
    Khoroshilov.

 8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin.

 9) Missing initialization of needed_headroom in geneve tunnel driver,
    from Paolo Abeni.

10) Fix conntrack template leak in openvswitch, from Joe Stringer.

11) Mission initialization of wq->flags in sock_alloc_inode(), from
    Nicolai Stange.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close
  net, socket, socket_wq: fix missing initialization of flags
  drivers: net: cpsw: fix error return code
  openvswitch: Fix template leak in error cases.
  sctp: label accepted/peeled off sockets
  sctp: use GFP_USER for user-controlled kmalloc
  qlcnic: fix a loop exit condition better
  net: cdc_ncm: avoid changing RX/TX buffers on MTU changes
  geneve: initialize needed_headroom
  ipv6: honor ifindex in case we receive ll addresses in router advertisements
  addrconf: always initialize sysctl table data
  ipv6/addrlabel: fix ip6addrlbl_get()
  switchdev: bridge: Pass ageing time as clock_t instead of jiffies
  sh_eth: fix 16-bit descriptor field access endianness too
  veth: don’t modify ip_summed; doing so treats packets with bad checksums as good.
  net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card
  net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card
  natsemi: add checks for dma mapping errors
  rhashtable: Kill harmless RCU warning in rhashtable_walk_init
  openvswitch: correct encoding of set tunnel action attributes
  ...

Pull block fixes from Jens Axboe:
 "Make the block layer great again.

  Basically three amazing fixes in this pull request, split into 4
  patches.  Believe me, they should go into 4.4.  Two of them fix a
  regression, the third and last fixes an easy-to-trigger bug.

   - Fix a bad irq enable through null_blk, for queue_mode=1 and using
     timer completions.  Add a block helper to restart a queue
     asynchronously, and use that from null_blk.  From me.

   - Fix a performance issue in NVMe.  Some devices (Intel Pxxxx) expose
     a stripe boundary, and performance suffers if we cross it.  We took
     that into account for merging, but not for the newer splitting
     code.  Fix from Keith.

   - Fix a kernel oops in lightnvm with multiple channels.  From Matias"

* 'for-linus' of git://git.kernel.dk/linux-block:
  lightnvm: wrong offset in bad blk lun calculation
  null_blk: use async queue restart helper
  block: add blk_start_queue_async()
  block: Split bios on chunk boundaries

mod_zone_page_state() takes a "delta" integer argument.  delta contains
the number of pages that should be added or subtracted from a struct
zone's vm_stat field.

If a zone is larger than 8TB this will cause overflows.  E.g.  for a
zone with a size slightly larger than 8TB the line

    mod_zone_page_state(zone, NR_ALLOC_BATCH, zone->managed_pages);

in mm/page_alloc.c:free_area_init_core() will result in a negative
result for the NR_ALLOC_BATCH entry within the zone's vm_stat, since 8TB
contain 0x8xxxxxxx pages which will be sign extended to a negative
value.

Fix this by changing the delta argument to long type.

This could fix an early boot problem seen on s390, where we have a 9TB
system with only one node.  ZONE_DMA contains 2GB and ZONE_NORMAL the
rest.  The system is trying to allocate a GFP_DMA page but ZONE_DMA is
completely empty, so it tries to reclaim pages in an endless loop.

This was seen on a heavily patched 3.10 kernel.  One possible
explaination seem to be the overflows caused by mod_zone_page_state().
Unfortunately I did not have the chance to verify that this patch
actually fixes the problem, since I don't have access to the system
right now.  However the overflow problem does exist anyway.

Given the description that a system with slightly less than 8TB does
work, this seems to be a candidate for the observed problem.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We currently only have an inline/sync helper to restart a stopped
queue. If drivers need an async version, they have to roll their
own. Add a generic helper instead.

Signed-off-by: Jens Axboe <axboe@fb.com>

NCM buffer sizes are negotiated with the device independently of
the network device MTU.  The RX buffers are allocated by the
usbnet framework based on the rx_urb_size value set by cdc_ncm. A
single RX buffer can hold a number of MTU sized packets.

The default usbnet change_mtu ndo only modifies rx_urb_size if it
is equal to hard_mtu.  And the cdc_ncm driver will set rx_urb_size
and hard_mtu independently of each other, based on dwNtbInMaxSize
and dwNtbOutMaxSize respectively. It was therefore assumed that
usbnet_change_mtu() would never touch rx_urb_size.  This failed to
consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens
to be equal.

Fix by implementing an NCM specific change_mtu ndo, modifying the
netdev MTU without touching the buffer size settings.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "Three fixes this time, two in SES picked up by KASAN for various types
  of buffer overrun.  The first is a USB array which returns page 8
  whatever is asked for and causes us to overrun with incorrect data
  format assumptions and the second is an invalid iteration of page 10
  (the additional information page).

  The final fix is a reversion of a NULL deref fix which caused
  suspend/resume not to be called in pairs leading to incorrect device
  operation (Jens has queued a more proper fix for the problem in
  block)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  ses: fix additional element traversal bug
  Revert "SCSI: Fix NULL pointer dereference in runtime PM"
  ses: Fix problems with simple enclosures

Merge misc fixes from Andrew Morton:
 "Three patches"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/linux/mmdebug.h: should include linux/bug.h
  mm/zswap: change incorrect strncmp use to strcmp
  proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter

mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included
linux/bug.h.  Include it ourselves.

This saves build-failures such as:

  arch/arm64/include/asm/pgtable.h: In function 'set_pte_at':
  arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration]
   VM_WARN_ONCE(!pte_young(pte),

Fixes: 02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xen bug fixes from David Vrabel:
 - XSA-155 security fixes to backend drivers.
 - XSA-157 security fixes to pciback.

* tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-pciback: fix up cleanup path when alloc fails
  xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
  xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
  xen/pciback: Do not install an IRQ handler for MSI interrupts.
  xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
  xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
  xen/pciback: Save xen_pci_op commands before processing it
  xen-scsiback: safely copy requests
  xen-blkback: read from indirect descriptors only once
  xen-blkback: only read request operation from shared ring once
  xen-netback: use RING_COPY_REQUEST() throughout
  xen-netback: don't use last request to determine minimum Tx credit
  xen: Add RING_COPY_REQUEST()
  xen/x86/pvh: Use HVM's flush_tlb_others op
  xen: Resume PMU from non-atomic context
  xen/events/fifo: Consume unprocessed events when a CPU dies

Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly
(i.e., by not considering that the other end may alter the data in the
shared ring while it is being inspected).  Safe usage of a request
generally requires taking a local copy.

Provide a RING_COPY_REQUEST() macro to use instead of
RING_GET_REQUEST() and an open-coded memcpy().  This takes care of
ensuring that the copy is done correctly regardless of any possible
compiler optimizations.

Use a volatile source to prevent the compiler from reordering or
omitting the copy.

This is part of XSA155.

CC: stable@vger.kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>