linux.git/include/uapi/misc, branch v6.2

Merge tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next

2022-11-29T12:19:29+00:00

Oded writes:

This tag contains habanalabs driver changes for v6.2:

- New feature of graceful hard-reset. Instead of immediately killing the
  user-process when a command submission times out, we wait a bit and give
  the user-process notification and let it try to close things gracefully,
  with the ability to retrieve debug information.

- Enhance the EventFD mechanism. Add new events such as access to illegal
  address (RAZWI), page fault, device unavailable. In addition, change the
  event workqueue to be handled in a single-threaded workqueue.

- Allow the control device to work during reset of the ASIC, to enable
  monitoring applications to continue getting the data.

- Add handling for Gaudi2 with PCI revision 2.

- Reduce severity of prints due to power/thermal events.

- Change how we use the h/w to perform memory scrubbing in Gaudi2.

- Multiple bug fixes, refactors and renames.

* tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (63 commits)
  habanalabs: fix VA range calculation
  habanalabs: fail driver load if EEPROM errors detected
  habanalabs: make print of engines idle mask more readable
  habanalabs: clear non-released encapsulated signals
  habanalabs: don't put context in hl_encaps_handle_do_release_sob()
  habanalabs: print context refcount value if hard reset fails
  habanalabs: add RMWREG32_SHIFTED to set a val within a mask
  habanalabs: fix rc when new CPUCP opcodes are not supported
  habanalabs/gaudi2: added memset for the cq_size register
  habanalabs: added return value check for hl_fw_dynamic_send_clear_cmd()
  habanalabs: increase the size of busy engines mask
  habanalabs/gaudi2: change memory scrub mechanism
  habanalabs: extend process wait timeout in device fine
  habanalabs: check schedule_hard_reset correctly
  habanalabs: reset device if still in use when released
  habanalabs/gaudi2: return to reset upon SM SEI BRESP error
  habanalabs/gaudi2: don't enable entries in the MSIX_GW table
  habanalabs/gaudi2: remove redundant firmware version check
  habanalabs/gaudi: fix print for firmware-alive event
  habanalabs: fix print for out-of-sync and pkt-failure events
  ...

misc: fastrpc: Add support for audiopd

2022-11-25T17:45:33+00:00

In order to be able to start the adsp listener for audiopd using adsprpcd,
we need to add the corresponding ioctl for creating a static process.
On that ioctl call we need to allocate the heap. Allocating the heap needs
to be happening only once and needs to be kept between different device
open calls, so attach it to the channel context to make sure that remains
until the RPMSG driver is removed. Then, if there are any VMIDs associated
with the static ADSP process, do a call to SCM to assign it.
And then, send all the necessary info related to heap to the DSP.

Co-developed-by: Srinivas Kandagatla 
Signed-off-by: Abel Vesa 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20221125071405.148786-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

habanalabs: increase the size of busy engines mask

2022-11-23T14:13:48+00:00

Increase the size of the busy engines mask in 'struct hl_info_hw_idle',
for future ASICs with more than 128 engines.

Signed-off-by: Tomer Tayar 
Reviewed-by: Oded Gabbay 
Signed-off-by: Oded Gabbay

habanalabs/gaudi: add page fault notify event

2022-11-23T14:13:46+00:00

Each time page fault happens, besides capturing its data, also notify
the user about it.

Signed-off-by: Dani Liberman 
Reviewed-by: Oded Gabbay 
Signed-off-by: Oded Gabbay

habanalabs/gaudi: add razwi notify event

2022-11-23T14:13:46+00:00

Each time razwi (read-only zero, write ignore) happens, besides
capturing its data, also notify the user about it.

Signed-off-by: Dani Liberman 
Reviewed-by: Oded Gabbay 
Signed-off-by: Oded Gabbay

habanalabs/gaudi2: add PCI revision 2 support

2022-11-23T14:13:46+00:00

Add support for Gaudi2 Device with PCI revision 2.
Functionality is exactly the same as revision 1, the only difference
is device name exposed to user.

Signed-off-by: Ofir Bitton 
Reviewed-by: Oded Gabbay 
Signed-off-by: Oded Gabbay

habanalabs/gaudi2: capture RAZWI information

2022-11-23T14:13:41+00:00

Added function to calculate possible engines which caused
RAZWI (read-only zero, write ignored), from a given router id or
module index.

When getting RAZWI via PSOC IP, first the router id is calculated
and then the possible engines that caused the RAZWI are calculated.

There is a possibility that the RAZWI initiator is not an engine. In
that case, it will not be included in possible engines as it
doesn't have an engine id.

RAZWI information is captured when receiving event from engine or via
PSOC IP.

Signed-off-by: Dani Liberman 
Reviewed-by: Oded Gabbay 
Signed-off-by: Oded Gabbay

habanalabs: add page fault info uapi

2022-11-23T14:13:40+00:00

Only the first page fault will be saved.
Besides the address which caused the page fault, the driver captures
all of the mmu user mappings.
User can retrieve this data via the new uapi (new opcode in INFO ioctl).

Signed-off-by: Dani Liberman 
Reviewed-by: Oded Gabbay 
Signed-off-by: Oded Gabbay

habanalabs: refactor razwi event notification

2022-11-23T14:13:39+00:00

This event notification was compatible only with gaudi, where razwi
and page fault happens together.

To make it compatible with all ASICs, this refactor contains:

1. Razwi notification will only notify about razwi info.
   New notification will be added in future patch, to retrieve data
   about page fault error.

2. Changed razwi info structure to support all ASICs.

Signed-off-by: Dani Liberman 
Reviewed-by: Oded Gabbay 
Signed-off-by: Oded Gabbay

Merge tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2022-10-10T20:04:25+00:00

Pull crypto updates from Herbert Xu:
 "API:
   - Feed untrusted RNGs into /dev/random
   - Allow HWRNG sleeping to be more interruptible
   - Create lib/utils module
   - Setting private keys no longer required for akcipher
   - Remove tcrypt mode=1000
   - Reorganised Kconfig entries

  Algorithms:
   - Load x86/sha512 based on CPU features
   - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher

  Drivers:
   - Add HACE crypto driver aspeed"

* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: aspeed - Remove redundant dev_err call
  crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
  crypto: aead - Remove unused inline functions from aead
  crypto: bcm - Simplify obtain the name for cipher
  crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
  hwrng: core - start hwrng kthread also for untrusted sources
  crypto: zip - remove the unneeded result variable
  crypto: qat - add limit to linked list parsing
  crypto: octeontx2 - Remove the unneeded result variable
  crypto: ccp - Remove the unneeded result variable
  crypto: aspeed - Fix check for platform_get_irq() errors
  crypto: virtio - fix memory-leak
  crypto: cavium - prevent integer overflow loading firmware
  crypto: marvell/octeontx - prevent integer overflows
  crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
  crypto: hisilicon/qm - fix the qos value initialization
  crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
  crypto: tcrypt - add async speed test for aria cipher
  crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
  crypto: aria - prepare generic module for optimized implementations
  ...