Pull tty fix from Greg KH:
 "Here is a single revert for a much-reported regression in 6.10-rc1
  when it comes to a few older architectures.

  Turns out that the VT ioctls don't work the same across all cpu types
  because of some old compatibility requrements for stuff like alpha and
  powerpc. So revert the change that attempted to have them use the
  _IO() macros and go back to the known-working values instead.

  This has NOT been in linux-next but has had many reports that it fixes
  the issue with 6.10-rc1"

* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "VT: Use macros to define ioctls"

This reverts commit 8c467f3300591a206fa8dcc6988d768910799872.

Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.

Reported-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca
Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org
Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Recent commit 0cfe71f45f42 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f42 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
   72 |         ev_type &= PROC_EVENT_ALL;
      |                 ^
      |                 |
      |                 unsigned int

Signed-off-by: Matt Jan <zoo868e@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.10-rc1. Nothing major here, just lots of new drivers and updates
  for apis and new hardware types. Included in here are:

   - big IIO driver updates with more devices and drivers added

   - fpga driver updates

   - hyper-v driver updates

   - uio_pruss driver removal, no one uses it, other drivers control the
     same hardware now

   - binder minor updates

   - mhi driver updates

   - excon driver updates

   - counter driver updates

   - accessability driver updates

   - coresight driver updates

   - other hwtracing driver updates

   - nvmem driver updates

   - slimbus driver updates

   - spmi driver updates

   - other smaller misc and char driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
  misc: ntsync: mark driver as "broken" to prevent from building
  spmi: pmic-arb: Add multi bus support
  spmi: pmic-arb: Register controller for bus instead of arbiter
  spmi: pmic-arb: Make core resources acquiring a version operation
  spmi: pmic-arb: Make the APID init a version operation
  spmi: pmic-arb: Fix some compile warnings about members not being described
  dt-bindings: spmi: Deprecate qcom,bus-id
  dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
  spmi: hisi-spmi-controller: Do not override device identifier
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
  spmi: make spmi_bus_type const
  extcon: adc-jack: Document missing struct members
  extcon: realtek: Remove unused of_gpio.h
  extcon: usbc-cros-ec: Convert to platform remove callback returning void
  extcon: usb-gpio: Convert to platform remove callback returning void
  extcon: max77843: Convert to platform remove callback returning void
  extcon: max3355: Convert to platform remove callback returning void
  extcon: intel-mrfld: Convert to platform remove callback returning void
  ...

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.10-rc1.
  Included in here are:

   - Usual good set of api cleanups and evolution by Jiri Slaby to make
     the serial interfaces move out of the 1990's by using kfifos
     instead of hand-rolling their own logic.

   - 8250_exar driver updates

   - max3100 driver updates

   - sc16is7xx driver updates

   - exar driver updates

   - sh-sci driver updates

   - tty ldisc api addition to help refuse bindings

   - other smaller serial driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
  serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
  serial: imx: Raise TX trigger level to 8
  serial: 8250_pnp: Simplify "line" related code
  serial: sh-sci: simplify locking when re-issuing RXDMA fails
  serial: sh-sci: let timeout timer only run when DMA is scheduled
  serial: sh-sci: describe locking requirements for invalidating RXDMA
  serial: sh-sci: protect invalidating RXDMA on shutdown
  tty: add the option to have a tty reject a new ldisc
  serial: core: Call device_set_awake_path() for console port
  dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
  tty: serial: uartps: Add support for uartps controller reset
  arm64: zynqmp: Add resets property for UART nodes
  dt-bindings: serial: cdns,uart: Add optional reset property
  serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
  serial: 8250_exar: Keep the includes sorted
  serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
  serial: 8250_exar: Use BIT() in exar_ee_read()
  serial: 8250_exar: Switch to use dev_err_probe()
  serial: 8250_exar: Return directly from switch-cases
  serial: 8250_exar: Decrease indentation level
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Add byte/half-word compare-and-exchange, emulated via LR/SC loops

 - Support for Rust

 - Support for Zihintpause in hwprobe

 - Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()

 - Support lockless lockrefs

* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
  riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
  riscv: select ARCH_HAS_FAST_MULTIPLIER
  riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
  riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
  riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
  riscv: mm: Always use an ASID to flush mm contexts
  riscv: mm: Preserve global TLB entries when switching contexts
  riscv: mm: Make asid_bits a local variable
  riscv: mm: Use a fixed layout for the MM context ID
  riscv: mm: Introduce cntx2asid/cntx2version helper macros
  riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
  riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
  riscv: mm: Combine the SMP and UP TLB flush code
  riscv: Only send remote fences when some other CPU is online
  riscv: mm: Broadcast kernel TLB flushes only when needed
  riscv: Use IPIs for remote cache/TLB flushes by default
  riscv: Factor out page table TLB synchronization
  riscv: Flush the instruction cache during SMP bringup
  riscv: hwprobe: export Zihintpause ISA extension
  riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
  ...

With virtio-mem, primarily hibernation is problematic: as the machine shuts
down, the virtio-mem device loses its state. Powering the machine back up
is like losing a bunch of DIMMs. While there would be ways to add limited
support, suspend+resume is more commonly used for VMs and "easier" to
support cleanly.

s2idle can be supported without any device dependencies. Similarly, one
would expect suspend-to-ram (i.e., S3) to work out of the box. However,
QEMU currently unplugs all device memory when resuming the VM, using a
cold reset on the "wakeup" path. In order to support S3, we need a feature
flag for the device to tell us if memory remains plugged when waking up. In
the future, QEMU will implement this feature.

So let's always support s2idle and support S3 with plugged memory only if
the device indicates support. Block hibernation early using the PM
notifier.

Trying to hibernate now fails early:
	# echo disk > /sys/power/state
	[   26.455369] PM: hibernation: hibernation entry
	[   26.458271] virtio_mem virtio0: hibernation is not supported.
	[   26.462498] PM: hibernation: hibernation exit
	-bash: echo: write error: Operation not permitted

s2idle works even without the new feature bit:
	# echo s2idle > /sys/power/mem_sleep
	# echo mem > /sys/power/state
	[   52.083725] PM: suspend entry (s2idle)
	[   52.095950] Filesystems sync: 0.010 seconds
	[   52.101493] Freezing user space processes
	[   52.104213] Freezing user space processes completed (elapsed 0.001 seconds)
	[   52.106520] OOM killer disabled.
	[   52.107655] Freezing remaining freezable tasks
	[   52.110880] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
	[   52.113296] printk: Suspending console(s) (use no_console_suspend to debug)

S3 does not work without the feature bit when memory is plugged:
	# echo deep > /sys/power/mem_sleep
	# echo mem > /sys/power/state
	[   32.788281] PM: suspend entry (deep)
	[   32.816630] Filesystems sync: 0.027 seconds
	[   32.820029] Freezing user space processes
	[   32.823870] Freezing user space processes completed (elapsed 0.001 seconds)
	[   32.827756] OOM killer disabled.
	[   32.829608] Freezing remaining freezable tasks
	[   32.833842] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
	[   32.837953] printk: Suspending console(s) (use no_console_suspend to debug)
	[   32.916172] virtio_mem virtio0: suspend+resume with plugged memory is not supported
	[   32.916181] virtio-pci 0000:00:02.0: PM: pci_pm_suspend(): virtio_pci_freeze+0x0/0x50 returns -1
	[   32.916197] virtio-pci 0000:00:02.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -1
	[   32.916210] virtio-pci 0000:00:02.0: PM: failed to suspend async: error -1

But S3 works with the new feature bit when memory is plugged (patched
QEMU):
	# echo deep > /sys/power/mem_sleep
	# echo mem > /sys/power/state
	[   33.983694] PM: suspend entry (deep)
	[   34.009828] Filesystems sync: 0.024 seconds
	[   34.013589] Freezing user space processes
	[   34.016722] Freezing user space processes completed (elapsed 0.001 seconds)
	[   34.019092] OOM killer disabled.
	[   34.020291] Freezing remaining freezable tasks
	[   34.023549] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
	[   34.026090] printk: Suspending console(s) (use no_console_suspend to debug)

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240318120645.105664-1-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is >2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...