linux.git/include/uapi/linux/usb, branch v4.13

include: usb: audio: specify exact endiannes of descriptors

2017-07-18T06:33:06+00:00

USB spec says that multiple byte fields are stored in
little-endian order (see chapter 8.1 of USB2.0 spec and
chapter 7.1 of USB3.0 spec), thus mark such fields as LE
for UAC1 and UAC2 headers

Signed-off-by: Ruslan Bilovol 
Signed-off-by: Felipe Balbi

Merge tag 'usb-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing

2017-06-20T03:39:34+00:00

Felipe writes:

usb: changes for v4.13 merge window

This time around we have a total of 57 non-merge commits. A list of
most important changes follows:

- Improvements to dwc3 tracing interface
- Initial dual-role support for dwc3
- Improvements to how we handle DMA resources in dwc3
- A new f_uac1 implementation which much more flexible
- Removal of AVR32 bits
- Improvements to f_mass_storage driver

usb: gadget: function: f_fs: Let ffs_epfile_ioctl wait for enable.

2017-06-02T08:22:31+00:00

This allows users to make an ioctl call as the first action on a
connection. Ex, some functions might want to get endpoint size
before making any i/os.

Previously, calling ioctls before read/write would depending on the
timing of endpoints being enabled.

ESHUTDOWN is now a possible return value and ENODEV is not, so change
docs accordingly.

Acked-by: Michal Nazarewicz 
Signed-off-by: Jerry Zhang 
Signed-off-by: Felipe Balbi

USB: hub: fix SS max number of ports

2017-05-17T09:53:02+00:00

Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.

This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Acked-by: Alan Stern 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

uapi: export all headers under uapi directories

2017-05-10T15:21:54+00:00

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret  for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch//include/uapi/asm/Kbuild;
 - arch//include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel 
Acked-by: Daniel Vetter 
Acked-by: Russell King 
Acked-by: Mark Salter 
Acked-by: Michael Ellerman  (powerpc)
Signed-off-by: Masahiro Yamada

usb: fix some references for /proc/bus/usb

2017-04-18T14:54:19+00:00

Since when we got rid of usbfs, the /proc/bus/usb is now
elsewhere. Fix references for it.

Signed-off-by: Mauro Carvalho Chehab 
Acked-by: Serge Hallyn 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Fix ExtCompat documentation in uapi header

2017-04-11T07:58:16+00:00

The code was fixed in
commit 53642399aa71 ("usb: gadget: f_fs: Fix wrong check on reserved1 wof OS_DESC_EXT_COMPAT")
but the in-header documentation kept referencing 0 as the expected value.
Reference 1 instead as per original commit message.

Signed-off-by: Vincent Pelletier 
Signed-off-by: Felipe Balbi

usb: gadget: f_fs: Document eventfd effect on descriptor format.

2017-01-02T08:55:28+00:00

When FUNCTIONFS_EVENTFD flag is set, __ffs_data_got_descs reads a 32bits,
little-endian value right after the fixed structure header, and passes it
to eventfd_ctx_fdget. Document this.

Also, rephrase a comment to be affirmative about the role of string
descriptor at index 0. Ref: USB 2.0 spec paragraph "9.6.7 String", and
also checked to still be current in USB 3.0 spec paragraph "9.6.9 String".

Signed-off-by: Vincent Pelletier 
Signed-off-by: Felipe Balbi

usb: ch9: make usb_endpoint_maxp() return only packet size

2016-11-03T08:38:22+00:00

Now that we have a helper to gather periodic
endpoints' multiplier bits from wMaxPacketSize and
every driver is using it, we can safely make sure
that usb_endpoint_maxp() returns only bits 10:0 of
wMaxPacketSize which is where the actual packet size
lies.

Signed-off-by: Felipe Balbi

usb: add helper to extract bits 12:11 of wMaxPacketSize

2016-10-31T09:15:33+00:00

According to USB Specification 2.0 table 9-4,
wMaxPacketSize is a bitfield. Endpoint's maxpacket
is laid out in bits 10:0. For high-speed,
high-bandwidth isochronous endpoints, bits 12:11
contain a multiplier to tell us how many
transactions we want to try per uframe.

This means that if we want an isochronous endpoint
to issue 3 transfers of 1024 bytes per uframe,
wMaxPacketSize should contain the value:

	1024 | (2 << 11)

or 5120 (0x1400). In order to make Host and
Peripheral controller drivers' life easier, we're
adding a helper which returns bits 12:11. Note that
no care is made WRT to checking endpoint type and
gadget's speed. That's left for drivers to handle.

Signed-off-by: Felipe Balbi