linux.git/include/uapi/linux/if_link.h, branch v6.1

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next

2022-10-03T06:52:13+00:00

Steffen Klassert says:

====================
1) Refactor selftests to use an array of structs in xfrm_fill_key().
   From Gautam Menghani.

2) Drop an unused argument from xfrm_policy_match.
   From Hongbin Wang.

3) Support collect metadata mode for xfrm interfaces.
   From Eyal Birger.

4) Add netlink extack support to xfrm.
   From Sabrina Dubroca.

Please note, there is a merge conflict in:

include/net/dst_metadata.h

between commit:

0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")

from the net-next tree and commit:

5182a5d48c3d ("net: allow storing xfrm interface metadata in metadata_dst")

from the ipsec-next tree.

Can be solved as done in linux-next.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller

net: dsa: allow the DSA master to be seen and changed through rtnetlink

2022-09-20T08:32:35+00:00

Some DSA switches have multiple CPU ports, which can be used to improve
CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(),
sets up only the first one, leading to suboptimal use of hardware.

The desire is to not change the default configuration but to permit the
user to create a dynamic mapping between individual user ports and the
CPU port that they are served by, configurable through rtnetlink. It is
also intended to permit load balancing between CPU ports, and in that
case, the foreseen model is for the DSA master to be a bonding interface
whose lowers are the physical DSA masters.

To that end, we create a struct rtnl_link_ops for DSA user ports with
the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that
contains the ifindex of the newly desired DSA master.

Signed-off-by: Vladimir Oltean 
Signed-off-by: Paolo Abeni

rtnetlink: advertise allmulti counter

2022-09-16T08:28:44+00:00

Like what was done with IFLA_PROMISCUITY, add IFLA_ALLMULTI to advertise
the allmulti counter.
The flag IFF_ALLMULTI is advertised only if it was directly set by a
userland app.

Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller

xfrm: interface: support collect metadata mode

2022-08-29T08:41:28+00:00

This commit adds support for 'collect_md' mode on xfrm interfaces.

Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.

On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.

On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.

Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.

Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.

Reviewed-by: Nicolas Dichtel 
Reviewed-by: Nikolay Aleksandrov 
Signed-off-by: Eyal Birger 
Signed-off-by: Steffen Klassert

Bonding: add per-port priority for failover re-selection

2022-06-24T10:27:59+00:00

Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.

This option could only be configured via netlink.

Signed-off-by: Hangbin Liu 
Acked-by: Jonathan Toppins 
Signed-off-by: David S. Miller

net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes

2022-05-16T09:18:55+00:00

New netlink attributes IFLA_TSO_MAX_SIZE and IFLA_TSO_MAX_SEGS
are used to report to user-space the device TSO limits.

ip -d link sh dev eth1
...
   tso_max_size 65536 tso_max_segs 65535

Signed-off-by: Eric Dumazet 
Acked-by: Alexander Duyck 
Signed-off-by: David S. Miller

net-core: rx_otherhost_dropped to core_stats

2022-04-08T03:32:49+00:00

Increment rx_otherhost_dropped counter when packet dropped due to
mismatched dest MAC addr.

An example when this drop can occur is when manually crafting raw
packets that will be consumed by a user space application via a tap
device. For testing purposes local traffic was generated using trafgen
for the client and netcat to start a server

Tested: Created 2 netns, sent 1 packet using trafgen from 1 to the other
with "{eth(daddr=$INCORRECT_MAC...}", verified that iproute2 showed the
counter was incremented. (Also had to modify iproute2 to show the stat,
additional patch for that coming next.)

Signed-off-by: Jeffrey Ji 
Reviewed-by: Brian Vazquez 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20220406172600.1141083-1-jeffreyjilinux@gmail.com
Signed-off-by: Jakub Kicinski

net: geneve: support IPv4/IPv6 as inner protocol

2022-03-17T11:36:32+00:00

This patch adds support for encapsulating IPv4/IPv6 within GENEVE.

In order to use this, a new IFLA_GENEVE_INNER_PROTO_INHERIT flag needs
to be provided at device creation. This property cannot be changed for
the time being.

In case IP traffic is received on a non-tun device the drop count is
increased.

Signed-off-by: Eyal Birger 
Link: https://lore.kernel.org/r/20220316061557.431872-1-eyal.birger@gmail.com
Signed-off-by: Paolo Abeni

gtp: Implement GTP echo response

2022-03-11T16:27:16+00:00

Adding GTP device through ip link creates the situation where
there is no userspace daemon which would handle GTP messages
(Echo Request for example). GTP-U instance which would not respond
to echo requests would violate GTP specification.

When GTP packet arrives with GTP_ECHO_REQ message type,
GTP_ECHO_RSP is send to the sender. GTP_ECHO_RSP message
should contain information element with GTPIE_RECOVERY tag and
restart counter value. For GTPv1 restart counter is not used
and should be equal to 0, for GTPv0 restart counter contains
information provided from userspace(IFLA_GTP_RESTART_COUNT).

Signed-off-by: Wojciech Drewek 
Suggested-by: Harald Welte 
Reviewed-by: Harald Welte 
Tested-by: Harald Welte 
Signed-off-by: Tony Nguyen

gtp: Allow to create GTP device without FDs

2022-03-11T16:27:16+00:00

Currently, when the user wants to create GTP device, he has to
provide file handles to the sockets created in userspace (IFLA_GTP_FD0,
IFLA_GTP_FD1). This behaviour is not ideal, considering the option of
adding support for GTP device creation through ip link. Ip link
application is not a good place to create such sockets.

This patch allows to create GTP device without providing
IFLA_GTP_FD0 and IFLA_GTP_FD1 arguments. If the user sets
IFLA_GTP_CREATE_SOCKETS attribute, then GTP module takes care
of creating UDP sockets by itself. Sockets are created with the
commonly known UDP ports used for GTP protocol (GTP0_PORT and
GTP1U_PORT). In this case we don't have to provide encap_destroy
because no extra deinitialization is needed, everything is covered
by udp_tunnel_sock_release.

Note: GTP instance created with only this change applied, does
not handle GTP Echo Requests. This is implemented in the following
patch.

Signed-off-by: Wojciech Drewek 
Signed-off-by: Tony Nguyen