Pull sound fixes from Takashi Iwai:
 "A small collection of fixes:

   - Revert of FireWire changes that caused a long-time regression

   - Another long-time regression fix for AMD HDMI

   - MIDI2 UMP fixes

   - HD-audio Conexant codec fixes and a quirk"

* tag 'sound-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Conditionally use snooping for AMD HDMI
  ALSA: usb-audio: Correct surround channels in UAC1 channel map
  ALSA: seq: ump: Explicitly reset RPN with Null RPN
  ALSA: seq: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
  ALSA: seq: ump: Use the common RPN/bank conversion context
  ALSA: ump: Explicitly reset RPN with Null RPN
  ALSA: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
  Revert "ALSA: firewire-lib: operate for period elapse event in process context"
  Revert "ALSA: firewire-lib: obsolete workqueue for period update"
  ALSA: hda/realtek: Add quirk for Acer Aspire E5-574G
  ALSA: seq: ump: Optimize conversions from SysEx to UMP
  ALSA: hda/conexant: Mute speakers at suspend / shutdown
  ALSA: hda/generic: Add a helper to mute speakers at suspend/shutdown
  ALSA: hda: conexant: Fix headset auto detect fail in the polling mode

The UMP 1.1 spec says that an RPN/NRPN should be sent when one of the
following occurs:
* a CC 38 is received
* a subsequent CC 6 is received
* a CC 98, 99, 100, and 101 is received, indicating the last RPN/NRPN
  message has ended and a new one has started

That said, we should send a partial data even if it's not fully
filled.  Let's change the UMP conversion helper code to follow that
rule.

Link: https://patch.msgid.link/20240731130528.12600-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull sound fixes from Takashi Iwai:
 "A collection of fixes gathered since the previous pull.

  We see a bit large LOCs at a HD-audio quirk, but that's only bulk COEF
  data, hence it's safe to take. In addition to that, there were two
  minor fixes for MIDI 2.0 handling for ALSA core, and the rest are all
  rather random small and device-specific fixes"

* tag 'sound-fix-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: fsl-asoc-card: Dynamically allocate memory for snd_soc_dai_link_components
  ASoC: amd: yc: Support mic on Lenovo Thinkpad E16 Gen 2
  ALSA: hda/realtek: Implement sound init sequence for Samsung Galaxy Book3 Pro 360
  ALSA: hda/realtek: cs35l41: Fixup remaining asus strix models
  ASoC: SOF: ipc4-topology: Preserve the DMA Link ID for ChainDMA on unprepare
  ASoC: SOF: ipc4-topology: Only handle dai_config with HW_PARAMS for ChainDMA
  ALSA: ump: Force 1 Group for MIDI1 FBs
  ALSA: ump: Don't update FB name for static blocks
  ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
  ASoC: TAS2781: Fix tasdev_load_calibrated_data()
  ASoC: tegra: select CONFIG_SND_SIMPLE_CARD_UTILS
  ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable
  ALSA: usb-audio: Move HD Webcam quirk to the right place
  ALSA: hda: tas2781: mark const variables as __maybe_unused
  ALSA: usb-audio: Fix microphone sound on HD webcam.
  ASoC: sof: amd: fix for firmware reload failure in Vangogh platform
  ASoC: Intel: Fix RT5650 SSP lookup
  ASOC: SOF: Intel: hda-loader: only wait for HDaudio IOC for IPC4 devices
  ASoC: SOF: imx8m: Fix DSP control regmap retrieval

Pull driver core updates from Greg KH:
 "Here is the big set of driver core changes for 6.11-rc1.

  Lots of stuff in here, with not a huge diffstat, but apis are evolving
  which required lots of files to be touched. Highlights of the changes
  in here are:

   - platform remove callback api final fixups (Uwe took many releases
     to get here, finally!)

   - Rust bindings for basic firmware apis and initial driver-core
     interactions.

     It's not all that useful for a "write a whole driver in rust" type
     of thing, but the firmware bindings do help out the phy rust
     drivers, and the driver core bindings give a solid base on which
     others can start their work.

     There is still a long way to go here before we have a multitude of
     rust drivers being added, but it's a great first step.

   - driver core const api changes.

     This reached across all bus types, and there are some fix-ups for
     some not-common bus types that linux-next and 0-day testing shook
     out.

     This work is being done to help make the rust bindings more safe,
     as well as the C code, moving toward the end-goal of allowing us to
     put driver structures into read-only memory. We aren't there yet,
     but are getting closer.

   - minor devres cleanups and fixes found by code inspection

   - arch_topology minor changes

   - other minor driver core cleanups

  All of these have been in linux-next for a very long time with no
  reported problems"

* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  ARM: sa1100: make match function take a const pointer
  sysfs/cpu: Make crash_hotplug attribute world-readable
  dio: Have dio_bus_match() callback take a const *
  zorro: make match function take a const pointer
  driver core: module: make module_[add|remove]_driver take a const *
  driver core: make driver_find_device() take a const *
  driver core: make driver_[create|remove]_file take a const *
  firmware_loader: fix soundness issue in `request_internal`
  firmware_loader: annotate doctests as `no_run`
  devres: Correct code style for functions that return a pointer type
  devres: Initialize an uninitialized struct member
  devres: Fix memory leakage caused by driver API devm_free_percpu()
  devres: Fix devm_krealloc() wasting memory
  driver core: platform: Switch to use kmemdup_array()
  driver core: have match() callback in struct bus_type take a const *
  MAINTAINERS: add Rust device abstractions to DRIVER CORE
  device: rust: improve safety comments
  MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
  MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
  firmware: rust: improve safety comments
  ...

Pull sound updates from Takashi Iwai:
 "Lots of changes in this cycle, but mostly for cleanups and
  refactoring.

  Significant amount of changes are about DT schema conversions for ASoC
  at this time while we see other usual suspects, too.

  Some highlights below:

  Core:
   - Re-introduction of PCM sync ID support API
   - MIDI2 time-base extension in ALSA sequencer API

  ASoC:
   - Syncing of features between simple-audio-card and the two
     audio-graph cards
   - Support for specifying the order of operations for components
     within cards to allow quirking for unusual systems
   - Lots of DT schema conversions
   - Continued SOF/Intel updates for topology, SoundWire, IPC3/4
   - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
     Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
     and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
     PCM5242

  HD-audio:
   - More quirks, Intel PantherLake support, senarytech codec support
   - Refactoring of Cirrus codec component-binding

  Others:
   - ALSA control kselftest improvements, and fixes for input value
     checks in various drivers"

* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
  kselftest/alsa: Log the PCM ID in pcm-test
  kselftest/alsa: Use card name rather than number in test names
  ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
  ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
  ALSA: seq: ump: Skip useless ports for static blocks
  ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
  ALSA: usb: Use BIT() for bit values
  ALSA: usb: Fix UBSAN warning in parse_audio_unit()
  ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
  ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
  ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
  ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
  ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
  ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
  ASoC: cs530x: Remove bclk from private structure
  ASoC: cs530x: Calculate proper bclk rate using TDM
  ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
  firmware: cs_dsp: Rename fw_ver to wmfw_ver
  firmware: cs_dsp: Clarify wmfw format version log message
  firmware: cs_dsp: Make wmfw and bin filename arguments const char *
  ...

An earlier patch changed the DECLARE_TLV_DB_SCALE declaration, but
now there are additional static const variables that cause
the same build warnings:

In file included from sound/pci/hda/tas2781_hda_i2c.c:23:
include/sound/tas2781-tlv.h:23:28: error: 'tas2563_dvc_table' defined but not used [-Werror=unused-const-variable=]
   23 | static const unsigned char tas2563_dvc_table[][4] = {
      |                            ^~~~~~~~~~~~~~~~~
In file included from include/sound/tlv.h:10,
                 from sound/pci/hda/tas2781_hda_i2c.c:22:
include/sound/tas2781-tlv.h:20:35: error: 'tas2563_dvc_tlv' defined but not used [-Werror=unused-const-variable=]
   20 | static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1);
      |                                   ^~~~~~~~~~~~~~~

Mark them all as unused as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20240719095640.3741247-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Updates for for v6.11

There are a lot of changes in here, though the big bulk of things is
cleanups and simplifications of various kinds which are internally
rather than externally visible.  A good chunk of those are DT schema
conversions, but there's also a lot of changes in the code.

Highlights:

 - Syncing of features between simple-audio-card and the two
   audio-graph cards so there is no reason to stick with an older
   driver.
 - Support for specifying the order of operations for components within
   cards to allow quirking for unusual systems.
 - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
   Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
   and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.

Requriment from customer to add new kcontrol to set tas2563 digital
Volume

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240710064238.1480-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Rename the tas2781_reset as tasdevice_reset in case of misunderstanding.
RESET register for both tas2563 and tas2781 is same and the use of reset
pin is also same.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240709043342.946-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.

Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>